[Mon Jun 17 00:54:42 2013] Detection parameters:
  Position = (339.0, 205.4) = 20 47 39.13 30 6 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 322.5 +/- 30.4
  Background counts = 377.4
  Rate = 0.05 +/- 0.004

[Mon Jun 17 00:54:58 2013] Off-axis axis estimate = 7.36'
[Mon Jun 17 00:56:41 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:41 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Mon Jun 17 00:56:41 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.878
[Mon Jun 17 00:56:41 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.11"
[Mon Jun 17 00:56:43 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jun 17 00:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src9.csv
[Mon Jun 17 00:56:43 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jun 17 00:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src9.csv
[Mon Jun 17 00:56:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jun 17 00:56:46 2013] Fit fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Jun 17 00:58:15 2013] Warning, spatial fit 9 centroid is now closest to src. 104
[Mon Jun 17 00:58:16 2013] Source 22 is offset by -2.835528 and -2.064555 pixels which is larger than
2 X fitted extent = 1.241467 x 1.241467, not incorporating fit results
[Mon Jun 17 00:58:16 2013] Source 22 is offset by -3.614656 and -7.918278 pixels which is larger than
2 X fitted extent = 5.697887 x 1.185407, not incorporating fit results
[Mon Jun 17 00:58:16 2013] Source 22 is offset by -5.303643 and -4.304923 pixels which is larger than
2 X fitted extent = 1.215453 x 1.215453, not incorporating fit results
[Mon Jun 17 00:58:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:16 2013] Assessing source extent using major
[Mon Jun 17 00:58:16 2013] Source does appear to be extended
[Mon Jun 17 00:58:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:16 2013] Source is confused with source 105
[Mon Jun 17 00:59:45 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:45 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Mon Jun 17 00:59:45 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.878
[Mon Jun 17 00:59:45 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.11"
[Mon Jun 17 00:59:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jun 17 00:59:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src7.csv
[Mon Jun 17 00:59:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jun 17 00:59:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src7.csv
[Mon Jun 17 00:59:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jun 17 00:59:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 17 00:59:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jun 17 00:59:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 17 00:59:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:10 2013] Warning, spatial fit 7 centroid is now closest to src. 104
[Mon Jun 17 01:01:10 2013] Source 22 is offset by -6.526195 and -4.346670 pixels which is larger than
2 X fitted extent = 1.193480 x 1.193480, not incorporating fit results
[Mon Jun 17 01:01:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:11 2013] Assessing source extent using major
[Mon Jun 17 01:01:11 2013] Source does appear to be extended
[Mon Jun 17 01:01:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:03:21 2013] XMMSAS src. selection expression = ellipse(29442.129059, 17822.925674, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 01:03:21 2013] Not overwriting source region fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_src.reg
[Mon Jun 17 01:03:21 2013] Extracting stamp from image fullrun_mos1_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (301, 168) - (376, 243)
[Mon Jun 17 01:03:21 2013] XMMSAS bgd. selection expression = annulus(29442.129059, 17822.925674, 1087.500000, 2175.000000, X, Y) && !ellipse(31638.442000, 14574.872000, 1927.408055, 1927.408055, 0.000000, X, Y) && !ellipse(31544.592000, 15903.932000, 992.128029, 992.128029, 0.000000, X, Y) && !ellipse(30706.955811, 15980.230469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28919.114838, 15875.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28437.676000, 16481.892000, 1476.600042, 1476.600042, 0.000000, X, Y) && !ellipse(27836.720459, 16722.439926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30346.134000, 16482.450000, 1470.144042, 1470.144042, 0.000000, X, Y) && !ellipse(28836.519531, 16391.043152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30942.961365, 16658.313004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30384.823761, 15268.979980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28387.352000, 17066.840000, 1692.368049, 1692.368049, 0.000000, X, Y) && !ellipse(32593.638000, 14880.412000, 1015.448029, 452.204813, 293.804000, X, Y) && !ellipse(28197.242600, 18417.691200, 595.071217, 595.071217, 0.000000, X, Y) && !ellipse(27562.920563, 18893.915375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.459137, 16924.678818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26827.519928, 18649.000870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28978.369781, 17110.291916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30571.990051, 17644.913925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28110.550000, 18246.014000, 1804.088052, 548.191216, 123.760000, X, Y) && !ellipse(27576.770000, 20746.514000, 1374.064040, 1374.064040, 0.000000, X, Y) && !ellipse(32069.702000, 13883.470000, 3873.136111, 3873.136111, 0.000000, X, Y) && !ellipse(30726.611400, 17304.410000, 1730.856050, 1730.856050, 0.000000, X, Y) && !ellipse(27521.908000, 19183.044000, 936.960027, 936.960027, 0.000000, X, Y) && !ellipse(29221.517365, 14999.904709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.441000, 17691.550000, 1643.480047, 1643.480047, 0.000000, X, Y) && !ellipse(27653.265900, 16904.813889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28578.848938, 15204.876953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.298400, 20207.460800, 1408.760041, 1408.760041, 0.000000, X, Y) && !ellipse(29525.118600, 14116.042000, 1669.240048, 1669.240048, 0.000000, X, Y) && !ellipse(33483.080000, 14812.244000, 1968.488057, 1968.488057, 0.000000, X, Y) && !ellipse(27830.792800, 20873.882000, 1368.064039, 1368.064039, 0.000000, X, Y)
[Mon Jun 17 01:03:21 2013] Writing fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22.gif
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/events/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0082540701/products/events/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Mon Jun 17 01:03:32 2013] Mean detx,y = (-6896.69, 5574.32) 
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/images/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_src.img and ../../xmm0082540701/products/images/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/spectra/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Mon Jun 17 01:03:32 2013] Setting source spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Jun 17 01:03:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/lightcurves/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Mon Jun 17 02:15:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 02:15:31 2013] rmf not generated due to insufficient counts
[Tue Jun 18 10:28:03 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:03 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 3199.00
[Tue Jun 18 10:28:03 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_bgd.pi.gz = 3454.00
[Tue Jun 18 10:28:03 2013] Got source and background scale factors 1235608.000000, 1576436.000000
[Tue Jun 18 10:28:03 2013] User source parameters:
  Position = (339.0, 205.4) = 20 47 39.13 30 6 21.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 491.8 +/- 57.6
  Background aperture counts = 2707.2
  Rate = 0.04 +/- 0.004

[Tue Jun 18 10:28:03 2013] Updating counts from extracted products
[Tue Jun 18 10:28:03 2013] Set source signif. to 491.76/52.03 = 9.45
[Tue Jun 18 10:28:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:31 2013] Using photon index=1.80, rate=0.036, arf fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22.arf
[Tue Jun 18 10:28:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:31 2013] Updating source flux to 7.4e-13
[Tue Jun 18 10:29:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:29:55 2013] xmm0082540701/analysis//spectral/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete