[Mon Jun 17 00:54:42 2013] Detection parameters:
  Position = (501.3, 259.6) = 20 46 44.66 30 10 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.7 +/- 17.8
  Background counts = 70.9
  Rate = 0.01 +/- 0.001

[Mon Jun 17 00:54:58 2013] Off-axis axis estimate = 14.98'
[Mon Jun 17 00:56:41 2013] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:56:41 2013] Initial guess for spatial extent in simple fitting = 13.92"
[Mon Jun 17 00:56:41 2013] source mask rpix=3.2, npix_max = 54, mask sum = 35, frac = 0.639
[Mon Jun 17 00:56:41 2013] Giving source the simple spatial ID 94 for pass 0, mean size = 13.92"
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src94.ximg exists
[Mon Jun 17 00:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src94.csv
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src94_1.ximg exists
[Mon Jun 17 00:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src94.csv
[Mon Jun 17 00:56:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Mon Jun 17 00:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src94.csv
[Mon Jun 17 00:56:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Mon Jun 17 00:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src94.csv
[Mon Jun 17 00:56:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:58:16 2013] Warning, spatial fit 94 centroid is now closest to src. 17
[Mon Jun 17 00:58:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:16 2013] Assessing source extent using major
[Mon Jun 17 00:58:16 2013] Source does appear to be extended
[Mon Jun 17 00:58:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:59:45 2013] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:45 2013] Initial guess for spatial extent in simple fitting = 13.92"
[Mon Jun 17 00:59:45 2013] source mask rpix=3.2, npix_max = 54, mask sum = 35, frac = 0.639
[Mon Jun 17 00:59:45 2013] Giving source the simple spatial ID 75 for pass 1, mean size = 13.92"
[Mon Jun 17 00:59:48 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src75.ximg exists
[Mon Jun 17 00:59:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src75.csv
[Mon Jun 17 00:59:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src75_1.ximg exists
[Mon Jun 17 00:59:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src75.csv
[Mon Jun 17 00:59:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:52 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Mon Jun 17 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src75.csv
[Mon Jun 17 00:59:52 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Mon Jun 17 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src75.csv
[Mon Jun 17 00:59:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:10 2013] Spatial fit model total counts = 1671.530000, observed total counts = 1335.000000
[Mon Jun 17 01:01:10 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 01:01:10 2013] Source 18 is offset by 5.970895 and -0.453660 pixels which is larger than
2 X fitted extent = 1.619940 x 1.619940, not incorporating fit results
[Mon Jun 17 01:01:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:11 2013] Assessing source extent using major
[Mon Jun 17 01:01:11 2013] Source does appear to be extended
[Mon Jun 17 01:01:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:03:28 2013] XMMSAS src. selection expression = ellipse(43568.193848, 22535.553558, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 01:03:28 2013] Not overwriting source region fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src18_src.reg
[Mon Jun 17 01:03:28 2013] Extracting stamp from image fullrun_mos1_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (464, 222) - (539, 297)
[Mon Jun 17 01:03:28 2013] XMMSAS bgd. selection expression = annulus(43568.193848, 22535.553558, 1087.500000, 2175.000000, X, Y) && !ellipse(44174.366241, 23675.378876, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:03:28 2013] Writing fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src18.gif
[Mon Jun 17 01:22:41 2013] Mean detx,y = (3970.77, 15661.55) 
[Mon Jun 17 01:22:44 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 01:23:01 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 01:23:02 2013] Setting source spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jun 17 01:23:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Jun 17 05:49:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 05:49:15 2013] rmf not generated due to insufficient counts
[Tue Jun 18 10:28:28 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:28 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 599.00
[Tue Jun 18 10:28:28 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src18_bgd.pi.gz = 3347.00
[Tue Jun 18 10:28:28 2013] Got source and background scale factors 680100.000000, 3087436.000000
[Tue Jun 18 10:28:28 2013] User source parameters:
  Position = (501.3, 259.6) = 20 46 44.66 30 10 4.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -138.3 +/- 25.5
  Background aperture counts = 737.3
  Rate = -0.01 +/- 0.002

[Tue Jun 18 10:28:28 2013] Updating counts from extracted products
[Tue Jun 18 10:28:28 2013] Set source signif. to -138.28/27.15 = -5.09
[Tue Jun 18 10:28:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:35 2013] Using photon index=1.80, rate=-0.0101, arf fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src18.arf
[Tue Jun 18 10:28:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:35 2013] Updated flux is not positive, keeping original flux
[Tue Jun 18 10:29:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:29:55 2013] xmm0082540701/analysis//spectral/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete