[Mon Jun 17 00:54:39 2013] Detection parameters:
  Position = (365.7, 170.1) = 20 47 30.20 30 3 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 901.4 +/- 46.7
  Background counts = 247.9
  Rate = 0.1 +/- 0.007

[Mon Jun 17 00:54:58 2013] Off-axis axis estimate = 10.50'
[Mon Jun 17 00:56:41 2013] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:56:41 2013] Initial guess for spatial extent in simple fitting = 11.68"
[Mon Jun 17 00:56:41 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.035
[Mon Jun 17 00:56:41 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.68"
[Mon Jun 17 00:56:42 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 17 00:56:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src1.csv
[Mon Jun 17 00:56:42 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 17 00:56:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src1.csv
[Mon Jun 17 00:56:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 17 00:56:46 2013] Fit fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 17 00:58:15 2013] Warning, spatial fit 1 centroid is now closest to src. 34
[Mon Jun 17 00:58:15 2013] Spatial fit model total counts = 5668.790000, observed total counts = 5653.000000
[Mon Jun 17 00:58:15 2013] Offset between fit and detection position for source 1 = 2.454625 pixels
[Mon Jun 17 00:58:15 2013] Warning, changing simple spatial fit ID from 1 to 12
[Mon Jun 17 00:58:15 2013] 5536.670000 total counts/ 3997.310000 bgd. counts: snr = 24.347607
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.454625 pixels
  Position = (364.2, 168.1) = 20 47 30.68 30 3 28.0
  Extent = 24.1 (24.1-24.1)", rotation angle = 0
  Source counts = 1539.4 +/- 74.4
  Background counts = 3997.3
  Rate = 0.1 +/- 0.005
[Mon Jun 17 00:58:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:16 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:58:16 2013] Source does appear to be extended
[Mon Jun 17 00:58:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:16 2013] Source is confused with source 2
[Mon Jun 17 00:58:16 2013] Source is confused with source 5
[Mon Jun 17 00:58:16 2013] Source is confused with source 11
[Mon Jun 17 00:58:16 2013] Source is confused with source 7
[Mon Jun 17 00:58:16 2013] Source is confused with source 8
[Mon Jun 17 00:58:16 2013] Source is confused with source 38
[Mon Jun 17 00:58:16 2013] Source is confused with source 35
[Mon Jun 17 00:58:16 2013] Source is confused with source 31
[Mon Jun 17 00:58:16 2013] Source is confused with source 34
[Mon Jun 17 00:59:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:59:45 2013] Initial guess for spatial extent in simple fitting = 24.09"
[Mon Jun 17 00:59:45 2013] source mask rpix=5.5, npix_max = 145, mask sum = 144, frac = 0.987
[Mon Jun 17 00:59:45 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 24.09"
[Mon Jun 17 00:59:45 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 17 00:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src1.csv
[Mon Jun 17 00:59:45 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 17 00:59:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src1.csv
[Mon Jun 17 00:59:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 17 00:59:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 17 00:59:49 2013] Fit fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 17 01:01:10 2013] Warning, spatial fit 1 centroid is now closest to src. 5
[Mon Jun 17 01:01:10 2013] Source 1 is offset by 3.884299 and -2.064598 pixels which is larger than
2 X fitted extent = 1.295315 x 1.295315, not incorporating fit results
[Mon Jun 17 01:01:10 2013] Source 1 is offset by 2.698667 and 1.504414 pixels which is larger than
2 X fitted extent = 1.385126 x 1.385126, not incorporating fit results
[Mon Jun 17 01:01:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:11 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:01:11 2013] Source does appear to be extended
[Mon Jun 17 01:01:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:03:21 2013] Counts = 1539.360000, rescaling region sizes by 2.000000
[Mon Jun 17 01:03:21 2013] XMMSAS src. selection expression = ellipse(31638.442000, 14574.872000, 2891.112083, 2891.112083, 0.000000, X, Y)
[Mon Jun 17 01:03:21 2013] Not overwriting source region fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 17 01:03:21 2013] Extracting stamp from image fullrun_mos1_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (198, 2) - (530, 334)
[Mon Jun 17 01:03:21 2013] XMMSAS bgd. selection expression = annulus(31638.442000, 14574.872000, 9637.040277, 19274.080555, X, Y) && !ellipse(31544.592000, 15903.932000, 992.128029, 992.128029, 0.000000, X, Y) && !ellipse(30706.955811, 15980.230469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28919.114838, 15875.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26022.730000, 29297.672000, 1276.672037, 1276.672037, 0.000000, X, Y) && !ellipse(29442.129059, 17822.925674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29847.214844, 14305.072922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30608.766200, 11706.016400, 369.746411, 369.746411, 0.000000, X, Y) && !ellipse(32401.169830, 13002.800964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28437.676000, 16481.892000, 1476.600042, 1476.600042, 0.000000, X, Y) && !ellipse(27836.720459, 16722.439926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30346.134000, 16482.450000, 1470.144042, 1470.144042, 0.000000, X, Y) && !ellipse(32459.896423, 13506.728180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28836.519531, 16391.043152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.234314, 27346.201141, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(30942.961365, 16658.313004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30384.823761, 15268.979980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24690.048767, 30519.492157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28387.352000, 17066.840000, 1692.368049, 1692.368049, 0.000000, X, Y) && !ellipse(32593.638000, 14880.412000, 1015.448029, 452.204813, 293.804000, X, Y) && !ellipse(23575.175415, 31035.290009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.339722, 30787.350098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28197.242600, 18417.691200, 595.071217, 595.071217, 0.000000, X, Y) && !ellipse(23983.762000, 30249.396000, 1575.696045, 1575.696045, 33.801000, X, Y) && !ellipse(32225.491852, 12221.992691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25057.033600, 29337.819200, 1685.640049, 1685.640049, 0.000000, X, Y) && !ellipse(25054.426000, 29524.502800, 2513.680072, 876.000025, 22.052900, X, Y) && !ellipse(27562.920563, 18893.915375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.459137, 16924.678818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26827.519928, 18649.000870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28978.369781, 17110.291916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25862.666351, 29840.256012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33012.980000, 13135.744000, 1936.568056, 1936.568056, 0.000000, X, Y) && !ellipse(31159.302000, 13034.878000, 1999.640058, 1999.640058, 0.000000, X, Y) && !ellipse(30571.990051, 17644.913925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28110.550000, 18246.014000, 1804.088052, 548.191216, 123.760000, X, Y) && !ellipse(23536.632000, 30476.016000, 1349.496039, 507.220015, 359.934554, X, Y) && !ellipse(33289.208099, 12653.097763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27576.770000, 20746.514000, 1374.064040, 1374.064040, 0.000000, X, Y) && !ellipse(32069.702000, 13883.470000, 3873.136111, 3873.136111, 0.000000, X, Y) && !ellipse(25363.018000, 28352.916000, 973.016028, 973.016028, 0.000000, X, Y) && !ellipse(30555.004000, 12608.724000, 1938.544056, 1938.544056, 0.000000, X, Y) && !ellipse(30726.611400, 17304.410000, 1730.856050, 1730.856050, 0.000000, X, Y) && !ellipse(31433.231110, 12658.625534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27521.908000, 19183.044000, 936.960027, 936.960027, 0.000000, X, Y) && !ellipse(29221.517365, 14999.904709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32603.326416, 14050.531281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26862.770000, 30679.278000, 1213.680035, 1213.680035, 0.000000, X, Y) && !ellipse(29111.441000, 17691.550000, 1643.480047, 1643.480047, 0.000000, X, Y) && !ellipse(27653.265900, 16904.813889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30610.857025, 13782.648117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28578.848938, 15204.876953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23360.407800, 25913.284000, 900.336026, 900.336026, 0.000000, X, Y) && !ellipse(32914.796000, 13352.988000, 1936.568056, 1339.536039, 134.069000, X, Y) && !ellipse(26818.880000, 30828.725000, 1125.272032, 1125.272032, 0.000000, X, Y) && !ellipse(29694.617035, 13614.033844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.298400, 20207.460800, 1408.760041, 1408.760041, 0.000000, X, Y) && !ellipse(25845.684784, 28938.037231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29525.118600, 14116.042000, 1669.240048, 1669.240048, 0.000000, X, Y) && !ellipse(24057.496000, 30709.732000, 1403.864040, 1403.864040, 0.000000, X, Y) && !ellipse(25446.401400, 22549.988800, 1249.528036, 1249.528036, 0.000000, X, Y) && !ellipse(30229.390381, 13440.092255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33483.080000, 14812.244000, 1968.488057, 1968.488057, 0.000000, X, Y) && !ellipse(27299.738129, 20921.364777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.948000, 30985.886000, 2761.824079, 2761.824079, 0.000000, X, Y) && !ellipse(27035.536000, 29733.003800, 1298.424037, 1298.424037, 0.000000, X, Y) && !ellipse(23719.238000, 24556.360000, 1209.024035, 1209.024035, 0.000000, X, Y) && !ellipse(24106.334000, 26650.779200, 1177.608034, 1177.608034, 0.000000, X, Y) && !ellipse(27830.792800, 20873.882000, 1368.064039, 1368.064039, 0.000000, X, Y) && !ellipse(38502.898000, 28414.866000, 1472.392042, 1472.392042, 0.000000, X, Y) && !ellipse(25213.784310, 31740.376635, 1266.620054, 808.240606, 1.932654, X, Y) && !ellipse(24020.726000, 24243.796000, 1190.184034, 1190.184034, 0.000000, X, Y) && !ellipse(26856.130524, 21701.569031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43568.193848, 22535.553558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44174.366241, 23675.378876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23492.470000, 24957.808000, 2380.368068, 2380.368068, 0.000000, X, Y) && !ellipse(41525.855042, 17520.349243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24779.960000, 23146.914000, 2499.056072, 2499.056072, 0.000000, X, Y) && !ellipse(30887.593384, 12224.380890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29964.983978, 28835.707092, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:03:21 2013] Writing fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1.gif
[Mon Jun 17 01:03:31 2013] ../../xmm0082540701/products/events/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0082540701/products/events/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Jun 17 01:03:31 2013] Mean detx,y = (-8644.45, 8823.30) 
[Mon Jun 17 01:03:31 2013] ../../xmm0082540701/products/images/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_src.img and ../../xmm0082540701/products/images/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Jun 17 01:03:31 2013] ../../xmm0082540701/products/spectra/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Jun 17 01:03:31 2013] Setting source spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 17 01:03:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 17 01:03:31 2013] ../../xmm0082540701/products/lightcurves/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Jun 18 10:28:01 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:01 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 52600.00
[Tue Jun 18 10:28:01 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 210145.00
[Tue Jun 18 10:28:02 2013] Got source and background scale factors 25102900.000000, 272923052.000000
[Tue Jun 18 10:28:02 2013] User source parameters:
  Position = (364.2, 168.1) = 20 47 30.68 30 3 28.0
  Extent = 24.1 (24.1-24.1)", rotation angle = 0
  Source aperture counts = 33271.3 +/- 230.3
  Background aperture counts = 19328.7
  Rate = 2 +/- 0.02

[Tue Jun 18 10:28:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:31 2013] Using photon index=1.80, rate=0.113, arf fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1.arf
[Tue Jun 18 10:28:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:31 2013] Updating source flux to 2e-12
[Tue Jun 18 10:29:04 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Tue Jun 18 10:29:04 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jun 18 10:29:55 2013] xmm0082540701/analysis//spectral/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete