[Sun Sep  2 10:40:22 2012] Detection parameters:
  Position = (185.4, 252.6) = 20 51 4.08 30 40 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 15.5
  Background counts = 74.1
  Rate = 0.005 +/- 0.001

[Sun Sep  2 10:40:23 2012] Off-axis axis estimate = 8.84'
[Sun Sep  2 13:36:14 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 13:36:14 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Sun Sep  2 13:36:14 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Sun Sep  2 13:36:14 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.85"
[Sun Sep  2 13:59:22 2012] fullrun_mos2_xmm0082540501_pi300-10000_cl_pass0_src10.ximg exists
[Sun Sep  2 13:59:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540501_pi300-10000_cl_pass0_src10.csv
[Sun Sep  2 13:59:22 2012] fullrun_mos2_xmm0082540501_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Sep  2 13:59:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540501_pi300-10000_cl_pass0_src10.csv
[Sun Sep  2 13:59:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 13:59:22 2012] fullrun_mos2_xmm0082540501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Sep  2 13:59:22 2012] fullrun_mos2_xmm0082540501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Sep  2 13:59:22 2012] Fit fullrun_mos2_xmm0082540501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Sep  2 13:59:32 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.380919 pixels away
[Sun Sep  2 13:59:32 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 13:59:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 13:59:32 2012] Assessing source extent using major
[Sun Sep  2 13:59:32 2012] Source does appear to be extended
[Sun Sep  2 13:59:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 15:06:55 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 15:06:55 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Sun Sep  2 15:06:55 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Sun Sep  2 15:06:55 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.85"
[Sun Sep  2 15:17:39 2012] fullrun_mos2_xmm0082540501_pi300-10000_cl_pass1_src8.ximg exists
[Sun Sep  2 15:17:39 2012] fullrun_mos2_xmm0082540501_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Sep  2 15:17:39 2012] Fit fullrun_mos2_xmm0082540501_pi300-10000_cl_pass1_src8 appears to have run properly
[Sun Sep  2 15:17:39 2012] fullrun_mos2_xmm0082540501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Sep  2 15:17:39 2012] fullrun_mos2_xmm0082540501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Sep  2 15:17:39 2012] Fit fullrun_mos2_xmm0082540501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Sep  2 15:17:45 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.412773 pixels away
[Sun Sep  2 15:17:45 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 15:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 15:17:45 2012] Assessing source extent using major
[Sun Sep  2 15:17:45 2012] Source does appear to be extended
[Sun Sep  2 15:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 15:36:25 2012] XMMSAS src. selection expression = ellipse(16078.105469, 21930.743195, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep  2 15:36:25 2012] Writing source region out to fullrun_mos2_xmm0082540501_pi300-10000_pass1_cl_src2_src.reg
[Sun Sep  2 15:36:25 2012] Extracting stamp from image fullrun_mos2_xmm0082540501_pi300-10000_cl_sm2.00.img.gz, (148, 215) - (223, 290)
[Sun Sep  2 15:36:25 2012] XMMSAS bgd. selection expression = annulus(16078.105469, 21930.743195, 1087.500000, 2175.000000, X, Y) && !ellipse(17047.418167, 20149.341995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17036.175446, 19489.421188, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep  2 15:36:25 2012] Writing fullrun_mos2_xmm0082540501_pi300-10000_pass1_cl_src2.gif
[Sun Sep  2 15:39:24 2012] Mean detx,y = (6321.19, -10921.99) 
[Sun Sep  2 15:39:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 15:39:33 2012] grppha failed
[Sun Sep  2 15:39:33 2012] Setting source spectrum file to fullrun_mos2_xmm0082540501_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Sep  2 15:39:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0082540501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Sep  2 15:39:43 2012] Not generating rmf since there are only 67 counts
[Sun Sep  2 15:39:43 2012] rmf not generated due to insufficient counts
[Sun Sep  2 15:40:04 2012] Updating aperture counts using extracted products
[Sun Sep  2 15:40:04 2012] Error reading totcts from fullrun_mos2_xmm0082540501_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Sep  2 15:40:04 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 15:40:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Sep  2 15:40:07 2012] xmm0082540501/analysis//spectral/fullrun_mos2_xmm0082540501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete