[Wed Aug  8 15:11:03 2012] Detection parameters:
  Position = (340.2, 467.0) = 20 51 27.72 31 11 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296.4 +/- 32.0
  Background counts = 217.6
  Rate = 0.03 +/- 0.003

[Wed Aug  8 15:11:06 2012] Off-axis axis estimate = 12.59'
[Wed Aug  8 15:19:11 2012] Using EEF radius (= 12.72 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 15:19:11 2012] Initial guess for spatial extent in simple fitting = 12.72"
[Wed Aug  8 15:19:11 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.895
[Wed Aug  8 15:19:11 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.72"
[Wed Aug  8 21:48:10 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src5.ximg exists
[Wed Aug  8 21:48:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src5.csv
[Wed Aug  8 21:48:10 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Aug  8 21:48:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src5.csv
[Wed Aug  8 21:48:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Aug  8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Aug  8 21:48:12 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Aug  9 05:25:59 2012] Warning, spatial fit 5 centroid is now closest to src. 8
[Thu Aug  9 05:25:59 2012] Spatial fit model total counts = 3535.450000, observed total counts = 3315.000000
[Thu Aug  9 05:25:59 2012] Offset between fit and detection position for source 9 = 1.342578 pixels
[Thu Aug  9 05:25:59 2012] Warning, changing simple spatial fit ID from 5 to 6
[Thu Aug  9 05:25:59 2012] 3330.384000 total counts/ 2735.600000 bgd. counts: snr = 11.371899
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.342578 pixels
  Position = (339.2, 466.1) = 20 51 28.07 31 11 21.0
  Extent = 25.0 (24.8-25.0)", rotation angle = 0
  Source counts = 594.8 +/- 57.7
  Background counts = 2735.6
  Rate = 0.07 +/- 0.007
[Thu Aug  9 05:26:00 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:00 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 05:26:00 2012] Source does appear to be extended
[Thu Aug  9 05:26:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 05:26:00 2012] Source is confused with source 8
[Thu Aug  9 05:26:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 05:26:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  9 05:26:43 2012] Initial guess for spatial extent in simple fitting = 24.98"
[Thu Aug  9 05:26:43 2012] source mask rpix=5.7, npix_max = 155, mask sum = 144, frac = 0.924
[Thu Aug  9 05:26:43 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 24.98"
[Thu Aug  9 14:21:17 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src5.ximg exists
[Thu Aug  9 14:21:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src5.csv
[Thu Aug  9 14:21:17 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Aug  9 14:21:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src5.csv
[Thu Aug  9 14:21:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 14:21:20 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Aug  9 14:21:20 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Aug  9 14:21:20 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Aug  9 20:52:08 2012] Spatial fit model total counts = 3746.910000, observed total counts = 3747.000000
[Thu Aug  9 20:52:08 2012] Offset between fit and detection position for source 9 = 0.865682 pixels
[Thu Aug  9 20:52:08 2012] Warning, changing simple spatial fit ID from 5 to 4
[Thu Aug  9 20:52:08 2012] 3382.040000 total counts/ 1937.270000 bgd. counts: snr = 32.824917
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.865682 pixels
  Position = (339.8, 466.7) = 20 51 27.85 31 11 23.5
  Extent = 25.9 (21.7-51.8)", rotation angle = 0
  Source counts = 1444.8 +/- 58.2
  Background counts = 1937.3
  Rate = 0.2 +/- 0.007
[Thu Aug  9 20:52:09 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:09 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 20:52:09 2012] Source does appear to be extended
[Thu Aug  9 20:52:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 20:52:48 2012] Counts = 1444.770000, rescaling region sizes by 2.000000
[Thu Aug  9 20:52:48 2012] XMMSAS src. selection expression = ellipse(29517.062200, 40553.776000, 3107.340089, 3107.340089, 0.000000, X, Y)
[Thu Aug  9 20:52:48 2012] Writing source region out to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src9_src.reg
[Thu Aug  9 20:52:48 2012] Extracting stamp from image fullrun_pn_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (161, 288) - (518, 595)
[Thu Aug  9 20:52:48 2012] XMMSAS bgd. selection expression = annulus(29517.062200, 40553.776000, 10357.800298, 20715.600596, X, Y) && !ellipse(28006.769775, 33818.992645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28215.205505, 32114.493042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27797.182000, 27259.170000, 586.883217, 586.883217, 0.000000, X, Y) && !ellipse(29678.824921, 42232.995544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29443.432678, 43650.072296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29622.060800, 40945.930000, 1768.488051, 1768.488051, 0.000000, X, Y) && !ellipse(29756.925500, 40116.054000, 1875.024054, 1875.024054, 0.000000, X, Y) && !ellipse(29378.693000, 39149.954000, 3996.784115, 3996.784115, 0.000000, X, Y) && !ellipse(28799.424000, 38714.606000, 1933.000056, 1933.000056, 0.000000, X, Y) && !ellipse(27397.204254, 33127.556641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28152.522919, 31691.878754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12750.736256, 30675.155620, 824.594031, 447.869977, 90.000000, X, Y) && !ellipse(28027.165710, 30751.841736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27466.112885, 30135.866974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27499.590800, 29634.490000, 1254.080036, 1254.080036, 0.000000, X, Y) && !ellipse(27000.864136, 29612.998779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27924.336426, 29011.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27469.604248, 28920.044098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.846588, 28530.684052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18192.225000, 28383.026600, 840.368024, 840.368024, 0.000000, X, Y) && !ellipse(28301.894867, 28013.781708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26876.603455, 27871.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27046.100525, 27195.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24863.015961, 26866.901978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20623.331100, 26287.502899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28201.500244, 26049.954773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19809.594000, 25621.797200, 1160.752033, 672.544019, 200.961000, X, Y) && !ellipse(27757.882019, 25182.976196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20266.554000, 25621.374000, 1382.256040, 1382.256040, 0.000000, X, Y) && !ellipse(20261.340000, 25018.278000, 2818.616081, 2818.616081, 0.000000, X, Y) && !ellipse(21906.370000, 24893.586000, 1337.736038, 1337.736038, 0.000000, X, Y) && !ellipse(29534.022000, 24129.896000, 1276.072037, 1276.072037, 0.000000, X, Y) && !ellipse(28336.436000, 25547.882000, 1180.904034, 1180.904034, 0.000000, X, Y) && !ellipse(26931.224700, 24676.551400, 1134.640033, 1134.640033, 0.000000, X, Y) && !ellipse(19945.731400, 24208.250000, 1423.192041, 1423.192041, 0.000000, X, Y) && !ellipse(28416.718000, 22537.658000, 2377.728068, 2377.728068, 0.000000, X, Y) && !ellipse(28330.318000, 22137.568000, 765.118422, 765.118422, 0.000000, X, Y) && !ellipse(29061.453613, 21496.615372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27039.076000, 21637.524000, 1309.496038, 1309.496038, 0.000000, X, Y) && !ellipse(28007.404327, 21544.855927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16406.810043, 20881.082672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27501.422119, 20843.098495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29073.292389, 20651.674866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28474.254059, 19868.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29116.779114, 19970.856323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17731.618400, 19712.611200, 929.664027, 929.664027, 0.000000, X, Y) && !ellipse(29247.766600, 18537.480000, 1600.640046, 1600.640046, 0.000000, X, Y) && !ellipse(28242.539032, 19178.522568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30189.389709, 43688.461365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35392.220000, 30261.912000, 1257.784036, 1257.784036, 0.000000, X, Y) && !ellipse(18148.532000, 28361.000000, 1522.104044, 1522.104044, 0.000000, X, Y) && !ellipse(18903.262405, 27626.726227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.724609, 26305.570374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27440.940552, 26661.846100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22981.394043, 25015.966888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26504.458618, 23961.795471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.635925, 23879.521423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.829987, 24055.313568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21177.333496, 23974.093567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.428000, 23484.660000, 1188.864034, 1188.864034, 0.000000, X, Y) && !ellipse(19325.441200, 22761.187800, 718.062421, 718.062421, 0.000000, X, Y) && !ellipse(27683.288971, 22299.338257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18368.968000, 22128.482000, 1551.352045, 1551.352045, 0.000000, X, Y) && !ellipse(26751.405548, 21785.393616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.148000, 20973.540000, 2781.184080, 2781.184080, 0.000000, X, Y) && !ellipse(26097.762000, 20672.853600, 1390.592040, 1390.592040, 0.000000, X, Y) && !ellipse(18251.401400, 18870.792200, 1731.424050, 1731.424050, 0.000000, X, Y)
[Thu Aug  9 20:52:48 2012] Writing fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src9.gif
[Thu Aug  9 21:07:09 2012] Mean detx,y = (-5066.05, -12922.47) 
[Thu Aug  9 21:07:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 21:17:07 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 21:17:08 2012] Setting source spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Aug  9 21:17:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Aug 10 07:06:06 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:06 2012] Error reading totcts from fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Aug 10 07:06:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:07 2012] Using photon index=1.80, rate=0.174, arf fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src9.arf
[Fri Aug 10 07:06:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:07 2012] Updating source flux to 9.7e-13
[Fri Aug 10 07:14:59 2012] Flag c found in src. 9 procflags, skipping spectral fitting