[Wed Aug  8 15:11:06 2012] Detection parameters:
  Position = (297.4, 236.0) = 20 51 42.22 30 54 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.7 +/- 31.7
  Background counts = 435.3
  Rate = 0.02 +/- 0.004

[Wed Aug  8 15:11:06 2012] Off-axis axis estimate = 4.53'
[Wed Aug  8 15:19:11 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 15:19:11 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Wed Aug  8 15:19:11 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.002
[Wed Aug  8 15:19:11 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 8.69"
[Wed Aug  8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src80.ximg exists
[Wed Aug  8 21:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src80.csv
[Wed Aug  8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src80_1.ximg exists
[Wed Aug  8 21:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src80.csv
[Wed Aug  8 21:48:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 21:48:14 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Wed Aug  8 21:48:14 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Wed Aug  8 21:48:14 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Thu Aug  9 05:26:00 2012] Spatial fit model total counts = 4373.070000, observed total counts = 4371.000000
[Thu Aug  9 05:26:00 2012] Offset between fit and detection position for source 85 = 3.774439 pixels
[Thu Aug  9 05:26:00 2012] 4401.202000 total counts/ 4070.260000 bgd. counts: snr = 5.187293
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 3.774439 pixels
  Position = (300.5, 238.2) = 20 51 41.17 30 54 49.5
  Extent = 17.4 (17.3-34.8)", rotation angle = 0
  Source counts = 330.9 +/- 66.3
  Background counts = 4070.3
  Rate = 0.04 +/- 0.008
[Thu Aug  9 05:26:00 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:00 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 05:26:00 2012] Source does appear to be extended
[Thu Aug  9 05:26:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 05:26:00 2012] Source is confused with source 84
[Thu Aug  9 05:26:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 05:26:43 2012] Initial guess for spatial extent in simple fitting = 17.38"
[Thu Aug  9 05:26:43 2012] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.002
[Thu Aug  9 05:26:43 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 17.38"
[Thu Aug  9 14:21:20 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src73.ximg exists
[Thu Aug  9 14:21:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src73.csv
[Thu Aug  9 14:21:20 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src73_1.ximg exists
[Thu Aug  9 14:21:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src73.csv
[Thu Aug  9 14:21:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 14:21:23 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Thu Aug  9 14:21:23 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Thu Aug  9 14:21:23 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Thu Aug  9 20:52:09 2012] Warning, spatial fit 73 centroid is now closest to src. 84
[Thu Aug  9 20:52:09 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:09 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 20:52:09 2012] Source does appear to be extended
[Thu Aug  9 20:52:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 20:52:51 2012] XMMSAS src. selection expression = ellipse(26097.762000, 20672.853600, 1042.944030, 1042.944030, 0.000000, X, Y)
[Thu Aug  9 20:52:51 2012] Writing source region out to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src85_src.reg
[Thu Aug  9 20:52:51 2012] Extracting stamp from image fullrun_pn_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (241, 178) - (360, 298)
[Thu Aug  9 20:52:51 2012] XMMSAS bgd. selection expression = annulus(26097.762000, 20672.853600, 1738.240050, 3476.480100, X, Y) && !ellipse(28325.014862, 17904.022217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20261.340000, 25018.278000, 2818.616081, 2818.616081, 0.000000, X, Y) && !ellipse(21906.370000, 24893.586000, 1337.736038, 1337.736038, 0.000000, X, Y) && !ellipse(29534.022000, 24129.896000, 1276.072037, 1276.072037, 0.000000, X, Y) && !ellipse(26931.224700, 24676.551400, 1134.640033, 1134.640033, 0.000000, X, Y) && !ellipse(28416.718000, 22537.658000, 2377.728068, 2377.728068, 0.000000, X, Y) && !ellipse(28330.318000, 22137.568000, 765.118422, 765.118422, 0.000000, X, Y) && !ellipse(29061.453613, 21496.615372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27039.076000, 21637.524000, 1309.496038, 1309.496038, 0.000000, X, Y) && !ellipse(28007.404327, 21544.855927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27501.422119, 20843.098495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29073.292389, 20651.674866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29363.691528, 18057.764343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28474.254059, 19868.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29116.779114, 19970.856323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29247.766600, 18537.480000, 1600.640046, 1600.640046, 0.000000, X, Y) && !ellipse(28242.539032, 19178.522568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27965.603546, 18744.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22981.394043, 25015.966888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26504.458618, 23961.795471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.635925, 23879.521423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.829987, 24055.313568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.428000, 23484.660000, 1188.864034, 1188.864034, 0.000000, X, Y) && !ellipse(27683.288971, 22299.338257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26751.405548, 21785.393616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.148000, 20973.540000, 2781.184080, 2781.184080, 0.000000, X, Y)
[Thu Aug  9 20:52:51 2012] Writing fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src85.gif
[Thu Aug  9 22:58:19 2012] Mean detx,y = (1584.68, 5973.95) 
[Thu Aug  9 22:58:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 22:58:45 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 22:58:45 2012] Setting source spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Thu Aug  9 22:58:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Fri Aug 10 07:06:07 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:07 2012] Error reading totcts from fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Fri Aug 10 07:06:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:09 2012] Using photon index=1.80, rate=0.0399, arf fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src85.arf
[Fri Aug 10 07:06:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:09 2012] Updating source flux to 1.3e-13
[Fri Aug 10 07:14:59 2012] Flag c found in src. 85 procflags, skipping spectral fitting