[Wed Aug 8 15:11:03 2012] Detection parameters: Position = (342.2, 472.9) = 20 51 27.04 31 11 50.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 275.5 +/- 31.4 Background counts = 215.9 Rate = 0.03 +/- 0.003 [Wed Aug 8 15:11:06 2012] Off-axis axis estimate = 13.04' [Wed Aug 8 15:19:11 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting [Wed Aug 8 15:19:11 2012] Initial guess for spatial extent in simple fitting = 12.95" [Wed Aug 8 15:19:11 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014 [Wed Aug 8 15:19:11 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.95" [Wed Aug 8 21:48:10 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src4.ximg exists [Wed Aug 8 21:48:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src4.csv [Wed Aug 8 21:48:10 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src4_1.ximg exists [Wed Aug 8 21:48:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src4.csv [Wed Aug 8 21:48:10 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Wed Aug 8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Wed Aug 8 21:48:12 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Thu Aug 9 05:25:59 2012] Warning, spatial fit 4 centroid is now closest to src. 12 [Thu Aug 9 05:25:59 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.010828 pixels away [Thu Aug 9 05:25:59 2012] Source 8 is offset by -9.848566 and -1.193903 pixels which is larger than 2 X fitted extent = 1.443664 x 1.443664, not incorporating fit results [Thu Aug 9 05:26:00 2012] Vigneting correction estimate = 1.000000 [Thu Aug 9 05:26:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 9 05:26:00 2012] Assessing source extent using major [Thu Aug 9 05:26:00 2012] Source does appear to be extended [Thu Aug 9 05:26:00 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 9 05:26:00 2012] Source is confused with source 9 [Thu Aug 9 05:26:00 2012] Source is confused with source 11 [Thu Aug 9 05:26:43 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting [Thu Aug 9 05:26:43 2012] Initial guess for spatial extent in simple fitting = 12.95" [Thu Aug 9 05:26:43 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014 [Thu Aug 9 05:26:43 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.95" [Thu Aug 9 14:21:17 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src4.ximg exists [Thu Aug 9 14:21:17 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src4_1.ximg exists [Thu Aug 9 14:21:17 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src4 appears to have run properly [Thu Aug 9 14:21:20 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Thu Aug 9 14:21:20 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Thu Aug 9 14:21:20 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Thu Aug 9 20:52:08 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.090175 pixels away [Thu Aug 9 20:52:08 2012] Warning, spatial fit 4 centroid is now closest to src. 9 [Thu Aug 9 20:52:08 2012] Spatial fit model total counts = 11175.000000, observed total counts = 10701.000000 [Thu Aug 9 20:52:08 2012] Offset between fit and detection position for source 8 = 2.020991 pixels [Thu Aug 9 20:52:08 2012] Warning, changing simple spatial fit ID from 4 to 6 [Thu Aug 9 20:52:08 2012] 9875.620000 total counts/ 8694.710000 bgd. counts: snr = 12.664535 Spatial fit parameters: Offset between fit and detection position for source 8 = 2.020991 pixels Position = (341.0, 471.2) = 20 51 27.44 31 11 43.1 Extent = 22.1 (19.6-26.4)", rotation angle = 0 Source counts = 1180.9 +/- 99.4 Background counts = 8694.7 Rate = 0.1 +/- 0.01 [Thu Aug 9 20:52:09 2012] Vigneting correction estimate = 1.000000 [Thu Aug 9 20:52:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 9 20:52:09 2012] Assessing source extent using major axis lower bound [Thu Aug 9 20:52:09 2012] Source does appear to be extended [Thu Aug 9 20:52:09 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 9 20:52:48 2012] Counts = 1180.910000, rescaling region sizes by 2.000000 [Thu Aug 9 20:52:48 2012] XMMSAS src. selection expression = ellipse(29622.060800, 40945.930000, 2652.732076, 2652.732076, 0.000000, X, Y) [Thu Aug 9 20:52:48 2012] Writing source region out to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src8_src.reg [Thu Aug 9 20:52:48 2012] Extracting stamp from image fullrun_pn_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (189, 319) - (493, 595) [Thu Aug 9 20:52:48 2012] XMMSAS bgd. selection expression = annulus(29622.060800, 40945.930000, 8842.440254, 17684.880509, X, Y) && !ellipse(28006.769775, 33818.992645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28215.205505, 32114.493042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27797.182000, 27259.170000, 586.883217, 586.883217, 0.000000, X, Y) && !ellipse(29678.824921, 42232.995544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29443.432678, 43650.072296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29517.062200, 40553.776000, 2071.560060, 2071.560060, 0.000000, X, Y) && !ellipse(29756.925500, 40116.054000, 1875.024054, 1875.024054, 0.000000, X, Y) && !ellipse(29378.693000, 39149.954000, 3996.784115, 3996.784115, 0.000000, X, Y) && !ellipse(28799.424000, 38714.606000, 1933.000056, 1933.000056, 0.000000, X, Y) && !ellipse(27397.204254, 33127.556641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28152.522919, 31691.878754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12750.736256, 30675.155620, 824.594031, 447.869977, 90.000000, X, Y) && !ellipse(28027.165710, 30751.841736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27466.112885, 30135.866974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27499.590800, 29634.490000, 1254.080036, 1254.080036, 0.000000, X, Y) && !ellipse(27000.864136, 29612.998779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27924.336426, 29011.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27469.604248, 28920.044098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.846588, 28530.684052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18192.225000, 28383.026600, 840.368024, 840.368024, 0.000000, X, Y) && !ellipse(28301.894867, 28013.781708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26876.603455, 27871.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27046.100525, 27195.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24863.015961, 26866.901978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20623.331100, 26287.502899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28201.500244, 26049.954773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19809.594000, 25621.797200, 1160.752033, 672.544019, 200.961000, X, Y) && !ellipse(27757.882019, 25182.976196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20266.554000, 25621.374000, 1382.256040, 1382.256040, 0.000000, X, Y) && !ellipse(20261.340000, 25018.278000, 2818.616081, 2818.616081, 0.000000, X, Y) && !ellipse(21906.370000, 24893.586000, 1337.736038, 1337.736038, 0.000000, X, Y) && !ellipse(29534.022000, 24129.896000, 1276.072037, 1276.072037, 0.000000, X, Y) && !ellipse(28336.436000, 25547.882000, 1180.904034, 1180.904034, 0.000000, X, Y) && !ellipse(26931.224700, 24676.551400, 1134.640033, 1134.640033, 0.000000, X, Y) && !ellipse(19945.731400, 24208.250000, 1423.192041, 1423.192041, 0.000000, X, Y) && !ellipse(28416.718000, 22537.658000, 2377.728068, 2377.728068, 0.000000, X, Y) && !ellipse(30189.389709, 43688.461365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35392.220000, 30261.912000, 1257.784036, 1257.784036, 0.000000, X, Y) && !ellipse(18148.532000, 28361.000000, 1522.104044, 1522.104044, 0.000000, X, Y) && !ellipse(18903.262405, 27626.726227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.724609, 26305.570374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27440.940552, 26661.846100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22981.394043, 25015.966888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26504.458618, 23961.795471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.635925, 23879.521423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.829987, 24055.313568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21177.333496, 23974.093567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.428000, 23484.660000, 1188.864034, 1188.864034, 0.000000, X, Y) && !ellipse(19325.441200, 22761.187800, 718.062421, 718.062421, 0.000000, X, Y) && !ellipse(18368.968000, 22128.482000, 1551.352045, 1551.352045, 0.000000, X, Y) && !ellipse(27055.148000, 20973.540000, 2781.184080, 2781.184080, 0.000000, X, Y) [Thu Aug 9 20:52:48 2012] Writing fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src8.gif [Thu Aug 9 20:59:05 2012] Mean detx,y = (-5130.93, -13365.91) [Thu Aug 9 20:59:11 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 21:06:19 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 21:06:20 2012] Setting source spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Thu Aug 9 21:06:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src8_bgd.pi.gz [Fri Aug 10 07:06:06 2012] Updating aperture counts using extracted products [Fri Aug 10 07:06:06 2012] Error reading totcts from fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Fri Aug 10 07:06:07 2012] Calculating source flux in energy range 0.30-8.00 [Fri Aug 10 07:06:07 2012] Using photon index=1.80, rate=0.142, arf fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src8.arf [Fri Aug 10 07:06:07 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Aug 10 07:06:07 2012] Updating source flux to 8.2e-13 [Fri Aug 10 07:14:59 2012] Flag b found in src. 8 procflags, skipping spectral fitting [Fri Aug 10 07:14:59 2012] Flag c found in src. 8 procflags, skipping spectral fitting