[Wed Aug  8 15:11:06 2012] Detection parameters:
  Position = (244.0, 276.1) = 20 52 0.30 30 57 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.3 +/- 34.5
  Background counts = 555.1
  Rate = 0.03 +/- 0.005

[Wed Aug  8 15:11:06 2012] Off-axis axis estimate = 4.27'
[Wed Aug  8 15:19:11 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 15:19:11 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Wed Aug  8 15:19:11 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.821
[Wed Aug  8 15:19:11 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 8.56"
[Wed Aug  8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src72.ximg exists
[Wed Aug  8 21:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src72.csv
[Wed Aug  8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src72_1.ximg exists
[Wed Aug  8 21:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src72.csv
[Wed Aug  8 21:48:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 21:48:14 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Wed Aug  8 21:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src72.csv
[Wed Aug  8 21:48:14 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Wed Aug  8 21:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src72.csv
[Wed Aug  8 21:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:26:00 2012] Source 77 is offset by 7.634132 and -3.464074 pixels which is larger than
2 X fitted extent = 1.023274 x 1.023274, not incorporating fit results
[Thu Aug  9 05:26:00 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:00 2012] Assessing source extent using major
[Thu Aug  9 05:26:00 2012] Source does appear to be extended
[Thu Aug  9 05:26:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 05:26:43 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 05:26:43 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Thu Aug  9 05:26:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.821
[Thu Aug  9 05:26:43 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 8.56"
[Thu Aug  9 14:21:19 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src66.ximg exists
[Thu Aug  9 14:21:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src66.csv
[Thu Aug  9 14:21:19 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src66_1.ximg exists
[Thu Aug  9 14:21:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src66.csv
[Thu Aug  9 14:21:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 14:21:23 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Thu Aug  9 14:21:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src66.csv
[Thu Aug  9 14:21:23 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Thu Aug  9 14:21:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src66.csv
[Thu Aug  9 14:21:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 20:52:08 2012] Source 77 is offset by -4.912902 and -3.990235 pixels which is larger than
2 X fitted extent = 1.986000 x 1.986000, not incorporating fit results
[Thu Aug  9 20:52:08 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 12.144719 pixels away
[Thu Aug  9 20:52:09 2012] Spatial fit model total counts = 5841.390000, observed total counts = 5296.000000
[Thu Aug  9 20:52:09 2012] Poor agreement between spatial fit and data for source 77
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug  9 20:52:09 2012] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 24.533587 pixels away
[Thu Aug  9 20:52:09 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:09 2012] Assessing source extent using major
[Thu Aug  9 20:52:09 2012] Source does appear to be extended
[Thu Aug  9 20:52:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 20:52:09 2012] Source is confused with source 37
[Thu Aug  9 20:52:51 2012] XMMSAS src. selection expression = ellipse(21177.333496, 23974.093567, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  9 20:52:51 2012] Writing source region out to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src77_src.reg
[Thu Aug  9 20:52:51 2012] Extracting stamp from image fullrun_pn_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (206, 239) - (281, 314)
[Thu Aug  9 20:52:51 2012] XMMSAS bgd. selection expression = annulus(21177.333496, 23974.093567, 1087.500000, 2175.000000, X, Y) && !ellipse(20623.331100, 26287.502899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19809.594000, 25621.797200, 1160.752033, 672.544019, 200.961000, X, Y) && !ellipse(20266.554000, 25621.374000, 1382.256040, 1382.256040, 0.000000, X, Y) && !ellipse(20261.340000, 25018.278000, 2818.616081, 2818.616081, 0.000000, X, Y) && !ellipse(21906.370000, 24893.586000, 1337.736038, 1337.736038, 0.000000, X, Y) && !ellipse(19945.731400, 24208.250000, 1423.192041, 1423.192041, 0.000000, X, Y) && !ellipse(22981.394043, 25015.966888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19325.441200, 22761.187800, 718.062421, 718.062421, 0.000000, X, Y) && !ellipse(18368.968000, 22128.482000, 1551.352045, 1551.352045, 0.000000, X, Y)
[Thu Aug  9 20:52:51 2012] Writing fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src77.gif
[Thu Aug  9 22:37:11 2012] Mean detx,y = (-4422.39, 5437.63) 
[Thu Aug  9 22:37:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 22:37:29 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 22:37:29 2012] Setting source spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Thu Aug  9 22:37:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Fri Aug 10 01:12:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 01:12:22 2012] rmf not generated due to insufficient counts
[Fri Aug 10 07:06:07 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:07 2012] Error reading totcts from fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Fri Aug 10 07:06:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:09 2012] Using photon index=1.80, rate=0.0292, arf fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src77.arf
[Fri Aug 10 07:06:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:09 2012] Updating source flux to 1.1e-13
[Fri Aug 10 07:14:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting