[Wed Aug  8 15:11:05 2012] Detection parameters:
  Position = (209.0, 204.8) = 20 52 12.10 30 52 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.1 +/- 22.9
  Background counts = 261.2
  Rate = 0.02 +/- 0.002

[Wed Aug  8 15:11:06 2012] Off-axis axis estimate = 9.39'
[Wed Aug  8 15:19:11 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 15:19:11 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Wed Aug  8 15:19:11 2012] source mask rpix=2.6, npix_max = 37, mask sum = 32, frac = 0.856
[Wed Aug  8 15:19:11 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 11.12"
[Wed Aug  8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src56.ximg exists
[Wed Aug  8 21:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src56.csv
[Wed Aug  8 21:48:12 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src56_1.ximg exists
[Wed Aug  8 21:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src56.csv
[Wed Aug  8 21:48:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 21:48:14 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Wed Aug  8 21:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Wed Aug  8 21:48:14 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Wed Aug  8 21:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Wed Aug  8 21:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:25:59 2012] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 13.633851 pixels away
[Thu Aug  9 05:26:00 2012] Spatial fit model total counts = 2796.370000, observed total counts = 2790.000000
[Thu Aug  9 05:26:00 2012] Offset between fit and detection position for source 61 = 2.368169 pixels
[Thu Aug  9 05:26:00 2012] Warning, changing simple spatial fit ID from 56 to 85
[Thu Aug  9 05:26:00 2012] 2782.493600 total counts/ 2719.130000 bgd. counts: snr = 1.215136
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 2.368169 pixels
  Position = (211.0, 203.5) = 20 52 11.43 30 52 18.3
  Extent = 8.1 (4.4-14.8)", rotation angle = 0
  Source counts = 63.4 +/- 52.7
  Background counts = 2719.1
  Rate = 0.008 +/- 0.006
  Deleting source due to low Poisson probability