[Wed Aug 8 15:11:04 2012] Detection parameters: Position = (319.6, 290.0) = 20 51 34.72 30 58 35.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 356.7 +/- 41.8 Background counts = 564.1 Rate = 0.04 +/- 0.005 [Wed Aug 8 15:11:06 2012] Off-axis axis estimate = 1.65' [Wed Aug 8 15:19:11 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting [Wed Aug 8 15:19:11 2012] Initial guess for spatial extent in simple fitting = 7.25" [Wed Aug 8 15:19:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064 [Wed Aug 8 15:19:11 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.25" [Wed Aug 8 21:48:11 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src31.ximg exists [Wed Aug 8 21:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src31.csv [Wed Aug 8 21:48:11 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src31_1.ximg exists [Wed Aug 8 21:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src31.csv [Wed Aug 8 21:48:11 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 21:48:13 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Wed Aug 8 21:48:13 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Wed Aug 8 21:48:13 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly [Thu Aug 9 05:25:59 2012] Warning, spatial fit 31 centroid is now closest to src. 40 [Thu Aug 9 05:25:59 2012] Source 35 is offset by -9.196177 and 0.253503 pixels which is larger than 2 X fitted extent = 6.965563 x 6.965563, not incorporating fit results [Thu Aug 9 05:25:59 2012] Source 35 is offset by 5.459310 and 6.419696 pixels which is larger than 2 X fitted extent = 1.874796 x 7.873196, not incorporating fit results [Thu Aug 9 05:26:00 2012] Vigneting correction estimate = 1.000000 [Thu Aug 9 05:26:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 9 05:26:00 2012] Assessing source extent using major [Thu Aug 9 05:26:00 2012] Source does appear to be extended [Thu Aug 9 05:26:00 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 9 05:26:00 2012] Source is confused with source 40 [Thu Aug 9 05:26:43 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting [Thu Aug 9 05:26:43 2012] Initial guess for spatial extent in simple fitting = 7.25" [Thu Aug 9 05:26:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064 [Thu Aug 9 05:26:43 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.25" [Thu Aug 9 14:21:18 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src29.ximg exists [Thu Aug 9 14:21:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src29.csv [Thu Aug 9 14:21:18 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src29_1.ximg exists [Thu Aug 9 14:21:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src29.csv [Thu Aug 9 14:21:18 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Aug 9 14:21:21 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Thu Aug 9 14:21:21 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Thu Aug 9 14:21:21 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly [Thu Aug 9 20:52:08 2012] Source 35 is offset by 7.284552 and 4.991726 pixels which is larger than 2 X fitted extent = 6.330621 x 6.330621, not incorporating fit results [Thu Aug 9 20:52:08 2012] Source 35 is offset by -2.706000 and -1.278136 pixels which is larger than 2 X fitted extent = 1.631549 x 1.631549, not incorporating fit results [Thu Aug 9 20:52:09 2012] Vigneting correction estimate = 1.000000 [Thu Aug 9 20:52:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 9 20:52:09 2012] Assessing source extent using major [Thu Aug 9 20:52:09 2012] Source does appear to be extended [Thu Aug 9 20:52:09 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 9 20:52:49 2012] XMMSAS src. selection expression = ellipse(27757.882019, 25182.976196, 652.500000, 652.500000, 0.000000, X, Y) [Thu Aug 9 20:52:49 2012] Writing source region out to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src35_src.reg [Thu Aug 9 20:52:49 2012] Extracting stamp from image fullrun_pn_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (282, 253) - (357, 328) [Thu Aug 9 20:52:49 2012] XMMSAS bgd. selection expression = annulus(27757.882019, 25182.976196, 1087.500000, 2175.000000, X, Y) && !ellipse(27797.182000, 27259.170000, 586.883217, 586.883217, 0.000000, X, Y) && !ellipse(28301.894867, 28013.781708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26876.603455, 27871.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27046.100525, 27195.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24863.015961, 26866.901978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28201.500244, 26049.954773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29534.022000, 24129.896000, 1276.072037, 1276.072037, 0.000000, X, Y) && !ellipse(28336.436000, 25547.882000, 1180.904034, 1180.904034, 0.000000, X, Y) && !ellipse(26931.224700, 24676.551400, 1134.640033, 1134.640033, 0.000000, X, Y) && !ellipse(28416.718000, 22537.658000, 2377.728068, 2377.728068, 0.000000, X, Y) && !ellipse(27324.724609, 26305.570374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27440.940552, 26661.846100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26504.458618, 23961.795471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.635925, 23879.521423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.829987, 24055.313568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.428000, 23484.660000, 1188.864034, 1188.864034, 0.000000, X, Y) && !ellipse(27683.288971, 22299.338257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.148000, 20973.540000, 2781.184080, 2781.184080, 0.000000, X, Y) [Thu Aug 9 20:52:49 2012] Writing fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src35.gif [Thu Aug 9 21:44:31 2012] Mean detx,y = (921.64, 1252.26) [Thu Aug 9 21:44:33 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 21:44:50 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 21:44:50 2012] Setting source spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Thu Aug 9 21:44:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src35_bgd.pi.gz [Thu Aug 9 23:49:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Aug 9 23:49:29 2012] rmf not generated due to insufficient counts [Fri Aug 10 07:06:06 2012] Updating aperture counts using extracted products [Fri Aug 10 07:06:06 2012] Error reading totcts from fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Fri Aug 10 07:06:08 2012] Calculating source flux in energy range 0.30-8.00 [Fri Aug 10 07:06:08 2012] Using photon index=1.80, rate=0.04, arf fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src35.arf [Fri Aug 10 07:06:08 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Aug 10 07:06:08 2012] Updating source flux to 1e-13 [Fri Aug 10 07:14:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting