[Wed Aug  8 15:11:04 2012] Detection parameters:
  Position = (237.6, 302.7) = 20 52 2.46 30 59 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.0 +/- 36.1
  Background counts = 531.9
  Rate = 0.04 +/- 0.006

[Wed Aug  8 15:11:06 2012] Off-axis axis estimate = 4.42'
[Wed Aug  8 15:19:11 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 15:19:11 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Wed Aug  8 15:19:11 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Wed Aug  8 15:19:11 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.64"
[Wed Aug  8 21:48:11 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src27.ximg exists
[Wed Aug  8 21:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src27.csv
[Wed Aug  8 21:48:11 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Aug  8 21:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src27.csv
[Wed Aug  8 21:48:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 21:48:13 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Aug  8 21:48:13 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Aug  8 21:48:13 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Aug  9 05:25:59 2012] Warning, spatial fit 27 centroid is now closest to src. 36
[Thu Aug  9 05:26:00 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:00 2012] Assessing source extent using major
[Thu Aug  9 05:26:00 2012] Source does appear to be extended
[Thu Aug  9 05:26:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 05:26:00 2012] Source is confused with source 36
[Thu Aug  9 05:26:43 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 05:26:43 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Thu Aug  9 05:26:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Thu Aug  9 05:26:43 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.64"
[Thu Aug  9 14:21:18 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src25.ximg exists
[Thu Aug  9 14:21:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src25.csv
[Thu Aug  9 14:21:18 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Aug  9 14:21:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src25.csv
[Thu Aug  9 14:21:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 14:21:21 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Aug  9 14:21:21 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Aug  9 14:21:21 2012] Fit fullrun_pn_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Aug  9 20:52:08 2012] Warning, spatial fit 25 centroid is now closest to src. 36
[Thu Aug  9 20:52:08 2012] Source 31 is offset by -0.928930 and -3.823507 pixels which is larger than
2 X fitted extent = 1.317021 x 1.317021, not incorporating fit results
[Thu Aug  9 20:52:09 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:09 2012] Assessing source extent using major
[Thu Aug  9 20:52:09 2012] Source does appear to be extended
[Thu Aug  9 20:52:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 20:52:49 2012] XMMSAS src. selection expression = ellipse(20623.331100, 26287.502899, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  9 20:52:49 2012] Writing source region out to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src31_src.reg
[Thu Aug  9 20:52:49 2012] Extracting stamp from image fullrun_pn_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (200, 265) - (275, 340)
[Thu Aug  9 20:52:49 2012] XMMSAS bgd. selection expression = annulus(20623.331100, 26287.502899, 1087.500000, 2175.000000, X, Y) && !ellipse(18192.225000, 28383.026600, 840.368024, 840.368024, 0.000000, X, Y) && !ellipse(19809.594000, 25621.797200, 1160.752033, 672.544019, 200.961000, X, Y) && !ellipse(20266.554000, 25621.374000, 1382.256040, 1382.256040, 0.000000, X, Y) && !ellipse(20261.340000, 25018.278000, 2818.616081, 2818.616081, 0.000000, X, Y) && !ellipse(21906.370000, 24893.586000, 1337.736038, 1337.736038, 0.000000, X, Y) && !ellipse(19945.731400, 24208.250000, 1423.192041, 1423.192041, 0.000000, X, Y) && !ellipse(18148.532000, 28361.000000, 1522.104044, 1522.104044, 0.000000, X, Y) && !ellipse(18903.262405, 27626.726227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22981.394043, 25015.966888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21177.333496, 23974.093567, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 20:52:49 2012] Writing fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src31.gif
[Thu Aug  9 21:42:41 2012] Mean detx,y = (-5895.51, 3674.97) 
[Thu Aug  9 21:42:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 21:42:59 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 21:42:59 2012] Setting source spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Aug  9 21:42:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Aug  9 23:46:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  9 23:46:10 2012] rmf not generated due to insufficient counts
[Fri Aug 10 07:06:06 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:06 2012] Error reading totcts from fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Aug 10 07:06:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:08 2012] Using photon index=1.80, rate=0.0401, arf fullrun_pn_xmm0082540401_pi300-10000_pass1_cl_src31.arf
[Fri Aug 10 07:06:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:08 2012] Updating source flux to 1.6e-13
[Fri Aug 10 07:14:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting