[Wed Aug  8 15:11:04 2012] Detection parameters:
  Position = (360.3, 162.0) = 20 51 21.00 30 49 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.9 +/- 26.5
  Background counts = 259.0
  Rate = 0.02 +/- 0.003

[Wed Aug  8 15:11:06 2012] Off-axis axis estimate = 10.86'
[Wed Aug  8 15:19:11 2012] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 15:19:11 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Wed Aug  8 15:19:11 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.865
[Wed Aug  8 15:19:11 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.86"
[Wed Aug  8 21:48:11 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src23.ximg exists
[Wed Aug  8 21:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src23.csv
[Wed Aug  8 21:48:11 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Aug  8 21:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src23.csv
[Wed Aug  8 21:48:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 21:48:13 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Aug  8 21:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Wed Aug  8 21:48:13 2012] fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Aug  8 21:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Wed Aug  8 21:48:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:25:59 2012] Spatial fit model total counts = 2949.000000, observed total counts = 2676.000000
[Thu Aug  9 05:25:59 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug  9 05:25:59 2012] Spatial fit model total counts = 2891.920000, observed total counts = 2893.000000
[Thu Aug  9 05:25:59 2012] Offset between fit and detection position for source 27 = 0.401104 pixels
[Thu Aug  9 05:25:59 2012] Warning, changing simple spatial fit ID from 23 to 60
[Thu Aug  9 05:25:59 2012] 2865.510000 total counts/ 2815.230000 bgd. counts: snr = 0.947629
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.401104 pixels
  Position = (360.2, 162.4) = 20 51 21.03 30 49 19.6
  Extent = 5.7 (3.0-10.7)", rotation angle = 316 (281-0) degrees
  Source counts = 50.3 +/- 53.5
  Background counts = 2815.2
  Rate = 0.006 +/- 0.006
  Deleting source due to low Poisson probability