[Wed Aug  8 15:12:57 2012] Detection parameters:
  Position = (314.0, 230.8) = 20 51 36.62 30 54 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.6 +/- 20.0
  Background counts = 108.2
  Rate = 0.01 +/- 0.002

[Wed Aug  8 15:12:58 2012] Off-axis axis estimate = 5.03'
[Thu Aug  9 01:40:07 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 01:40:07 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Thu Aug  9 01:40:07 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.148
[Thu Aug  9 01:40:07 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.94"
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src31.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src31.csv
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src31.csv
[Thu Aug  9 05:25:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Aug  9 05:25:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Aug  9 05:25:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Aug  9 05:25:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:26:26 2012] Spatial fit model total counts = 1927.930000, observed total counts = 1852.000000
[Thu Aug  9 05:26:26 2012] Offset between fit and detection position for source 59 = 1.074146 pixels
[Thu Aug  9 05:26:26 2012] Warning, changing simple spatial fit ID from 31 to 28
[Thu Aug  9 05:26:26 2012] 1945.461700 total counts/ 1878.470000 bgd. counts: snr = 1.545677
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 1.074146 pixels
  Position = (313.5, 229.8) = 20 51 36.79 30 54 13.2
  Extent = 9.3 (3.0-18.1)", rotation angle = 0
  Source counts = 67.0 +/- 44.1
  Background counts = 1878.5
  Rate = 0.006 +/- 0.004
  Deleting source due to low Poisson probability