[Wed Aug  8 15:12:56 2012] Detection parameters:
  Position = (324.1, 223.3) = 20 51 33.20 30 53 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.5 +/- 17.7
  Background counts = 102.7
  Rate = 0.01 +/- 0.002

[Wed Aug  8 15:12:58 2012] Off-axis axis estimate = 5.76'
[Thu Aug  9 01:40:07 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 01:40:07 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Thu Aug  9 01:40:07 2012] source mask rpix=2.1, npix_max = 27, mask sum = 26, frac = 0.933
[Thu Aug  9 01:40:08 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.31"
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src45.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src45.csv
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src45.csv
[Thu Aug  9 05:25:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu Aug  9 05:25:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu Aug  9 05:25:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu Aug  9 05:25:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:26:26 2012] Warning, spatial fit 45 centroid is now closest to src. 58
[Thu Aug  9 05:26:26 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:26 2012] Assessing source extent using major
[Thu Aug  9 05:26:26 2012] Source does appear to be extended
[Thu Aug  9 05:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 05:26:26 2012] Source is confused with source 60
[Thu Aug  9 17:01:34 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 17:01:34 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Thu Aug  9 17:01:34 2012] source mask rpix=2.1, npix_max = 27, mask sum = 26, frac = 0.933
[Thu Aug  9 17:01:34 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 9.31"
[Thu Aug  9 20:51:44 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src34.ximg exists
[Thu Aug  9 20:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src34.csv
[Thu Aug  9 20:51:44 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src34_1.ximg exists
[Thu Aug  9 20:51:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src34.csv
[Thu Aug  9 20:51:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 20:51:47 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Thu Aug  9 20:51:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src34.csv
[Thu Aug  9 20:51:47 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Thu Aug  9 20:51:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src34.csv
[Thu Aug  9 20:51:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 20:52:30 2012] Warning, spatial fit 34 centroid is now closest to src. 58
[Thu Aug  9 20:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:30 2012] Assessing source extent using major
[Thu Aug  9 20:52:30 2012] Source does appear to be extended
[Thu Aug  9 20:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 04:21:27 2012] XMMSAS src. selection expression = ellipse(28150.571472, 19378.569733, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 04:21:27 2012] Writing source region out to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src47_src.reg
[Fri Aug 10 04:21:27 2012] Extracting stamp from image fullrun_mos2_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (287, 186) - (362, 261)
[Fri Aug 10 04:21:27 2012] XMMSAS bgd. selection expression = annulus(28150.571472, 19378.569733, 1087.500000, 2175.000000, X, Y) && !ellipse(29481.904000, 19270.638000, 2927.104084, 2927.104084, 0.000000, X, Y) && !ellipse(29261.288000, 19886.686000, 1156.432033, 1156.432033, 0.000000, X, Y) && !ellipse(27951.530000, 21266.280000, 2697.440078, 2697.440078, 0.000000, X, Y) && !ellipse(27900.422577, 19966.904312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27758.110352, 21704.569214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28425.250000, 22674.228000, 1155.888033, 1155.888033, 0.000000, X, Y) && !ellipse(29218.168600, 20138.582000, 1463.552042, 1463.552042, 0.000000, X, Y) && !ellipse(28759.125427, 20303.489014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28400.972595, 19771.508759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28449.559200, 22264.884000, 1347.448039, 1347.448039, 0.000000, X, Y) && !ellipse(28644.595428, 21964.077087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26548.288000, 20584.176000, 1379.200040, 1379.200040, 0.000000, X, Y)
[Fri Aug 10 04:21:27 2012] Writing fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src47.gif
[Fri Aug 10 04:56:48 2012] Mean detx,y = (-3888.49, -6187.88) 
[Fri Aug 10 04:56:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 04:57:03 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 04:57:03 2012] Setting source spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Aug 10 04:57:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Fri Aug 10 06:41:46 2012] Not generating rmf since there are only 91 counts
[Fri Aug 10 06:41:46 2012] rmf not generated due to insufficient counts
[Fri Aug 10 07:06:11 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:11 2012] Error reading totcts from fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Aug 10 07:06:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:12 2012] Using photon index=1.80, rate=0.0106, arf fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src47.arf
[Fri Aug 10 07:06:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:12 2012] Updating source flux to 1.5e-13
[Fri Aug 10 07:09:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting