[Wed Aug  8 15:12:56 2012] Detection parameters:
  Position = (323.1, 281.7) = 20 51 33.55 30 57 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.9 +/- 20.6
  Background counts = 145.7
  Rate = 0.008 +/- 0.002

[Wed Aug  8 15:12:58 2012] Off-axis axis estimate = 2.16'
[Thu Aug  9 01:40:08 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 01:40:08 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Thu Aug  9 01:40:08 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.009
[Thu Aug  9 01:40:08 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 7.51"
[Thu Aug  9 05:25:37 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src57.ximg exists
[Thu Aug  9 05:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src57.csv
[Thu Aug  9 05:25:37 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src57_1.ximg exists
[Thu Aug  9 05:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src57.csv
[Thu Aug  9 05:25:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Thu Aug  9 05:25:38 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Thu Aug  9 05:26:26 2012] Source 33 is offset by 2.991309 and -2.401788 pixels which is larger than
2 X fitted extent = 0.865563 x 0.865563, not incorporating fit results
[Thu Aug  9 05:26:26 2012] Warning, spatial fit 57 centroid is now closest to src. 35
[Thu Aug  9 05:26:26 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:26 2012] Assessing source extent using major
[Thu Aug  9 05:26:26 2012] Source does appear to be extended
[Thu Aug  9 05:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 05:26:26 2012] Source is confused with source 36
[Thu Aug  9 17:01:34 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 17:01:34 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Thu Aug  9 17:01:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.009
[Thu Aug  9 17:01:34 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 7.51"
[Thu Aug  9 20:51:45 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src45.ximg exists
[Thu Aug  9 20:51:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src45.csv
[Thu Aug  9 20:51:45 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src45_1.ximg exists
[Thu Aug  9 20:51:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src45.csv
[Thu Aug  9 20:51:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 20:51:47 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Thu Aug  9 20:51:47 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Thu Aug  9 20:51:47 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Thu Aug  9 20:52:30 2012] Source 33 is offset by 2.991309 and -2.401788 pixels which is larger than
2 X fitted extent = 0.865563 x 0.865563, not incorporating fit results
[Thu Aug  9 20:52:30 2012] Warning, spatial fit 45 centroid is now closest to src. 29
[Thu Aug  9 20:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:30 2012] Assessing source extent using major
[Thu Aug  9 20:52:30 2012] Source does appear to be extended
[Thu Aug  9 20:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 04:21:27 2012] XMMSAS src. selection expression = ellipse(28058.311859, 24457.112427, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 04:21:27 2012] Writing source region out to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src33_src.reg
[Fri Aug 10 04:21:27 2012] Extracting stamp from image fullrun_mos2_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (286, 244) - (361, 319)
[Fri Aug 10 04:21:27 2012] XMMSAS bgd. selection expression = annulus(28058.311859, 24457.112427, 1087.500000, 2175.000000, X, Y) && !ellipse(28367.928101, 26530.947845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.718120, 27351.650600, 725.749621, 725.749621, 0.000000, X, Y) && !ellipse(27679.448000, 27520.888000, 1721.840050, 1721.840050, 0.000000, X, Y) && !ellipse(28343.896000, 25086.186000, 1201.376035, 1201.376035, 0.000000, X, Y) && !ellipse(27951.530000, 21266.280000, 2697.440078, 2697.440078, 0.000000, X, Y) && !ellipse(28894.672000, 24940.104000, 1269.512037, 1269.512037, 0.000000, X, Y) && !ellipse(27758.110352, 21704.569214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28425.250000, 22674.228000, 1155.888033, 1155.888033, 0.000000, X, Y) && !ellipse(28449.559200, 22264.884000, 1347.448039, 1347.448039, 0.000000, X, Y) && !ellipse(28644.595428, 21964.077087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29238.594513, 24494.537720, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 04:21:27 2012] Writing fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src33.gif
[Fri Aug 10 05:00:17 2012] Mean detx,y = (-1361.92, -1861.31) 
[Fri Aug 10 05:00:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 05:00:28 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 05:00:28 2012] Setting source spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Aug 10 05:00:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Aug 10 06:57:50 2012] Not generating rmf since there are only 91 counts
[Fri Aug 10 06:57:50 2012] rmf not generated due to insufficient counts
[Fri Aug 10 07:06:11 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:11 2012] Error reading totcts from fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Aug 10 07:06:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:12 2012] Using photon index=1.80, rate=0.00817, arf fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src33.arf
[Fri Aug 10 07:06:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:12 2012] Updating source flux to 7.9e-14
[Fri Aug 10 07:09:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting