[Wed Aug 8 15:12:54 2012] Detection parameters: Position = (316.2, 318.0) = 20 51 35.87 31 0 35.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 242.4 +/- 29.4 Background counts = 173.6 Rate = 0.02 +/- 0.003 [Wed Aug 8 15:12:58 2012] Off-axis axis estimate = 1.92' [Thu Aug 9 01:40:07 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting [Thu Aug 9 01:40:07 2012] Initial guess for spatial extent in simple fitting = 7.39" [Thu Aug 9 01:40:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828 [Thu Aug 9 01:40:07 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.39" [Thu Aug 9 05:25:35 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src5.ximg exists [Thu Aug 9 05:25:35 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src5_1.ximg exists [Thu Aug 9 05:25:35 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src5 appears to have run properly [Thu Aug 9 05:25:37 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Thu Aug 9 05:25:37 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Thu Aug 9 05:25:37 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Thu Aug 9 05:26:26 2012] Spatial fit model total counts = 3186.040000, observed total counts = 3183.000000 [Thu Aug 9 05:26:26 2012] Offset between fit and detection position for source 3 = 1.141810 pixels [Thu Aug 9 05:26:26 2012] 3147.633000 total counts/ 2988.380000 bgd. counts: snr = 2.913196 Spatial fit parameters: Offset between fit and detection position for source 3 = 1.141810 pixels Position = (315.5, 319.0) = 20 51 36.09 31 0 40.9 Extent = 10.8 (7.3-14.8)", rotation angle = 0 Source counts = 159.3 +/- 56.1 Background counts = 2988.4 Rate = 0.01 +/- 0.005 [Thu Aug 9 05:26:26 2012] Vigneting correction estimate = 1.000000 [Thu Aug 9 05:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 9 05:26:26 2012] Assessing source extent using major axis lower bound [Thu Aug 9 05:26:26 2012] Source does appear to be extended [Thu Aug 9 05:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 9 05:26:26 2012] Source is confused with source 4 [Thu Aug 9 17:01:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Aug 9 17:01:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Aug 9 17:01:34 2012] Initial guess for spatial extent in simple fitting = 10.76" [Thu Aug 9 17:01:34 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.018 [Thu Aug 9 17:01:34 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.76" [Thu Aug 9 20:51:43 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src5.ximg exists [Thu Aug 9 20:51:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src5.csv [Thu Aug 9 20:51:43 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src5_1.ximg exists [Thu Aug 9 20:51:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src5.csv [Thu Aug 9 20:51:43 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Aug 9 20:51:45 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Thu Aug 9 20:51:45 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Thu Aug 9 20:51:45 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Thu Aug 9 20:52:30 2012] Spatial fit model total counts = 3141.590000, observed total counts = 3145.000000 [Thu Aug 9 20:52:30 2012] Offset between fit and detection position for source 3 = 3.797776 pixels [Thu Aug 9 20:52:30 2012] 3112.806000 total counts/ 2462.670000 bgd. counts: snr = 13.100899 Spatial fit parameters: Offset between fit and detection position for source 3 = 3.797776 pixels Position = (318.7, 316.9) = 20 51 35.02 31 0 31.9 Extent = 21.5 (6.8-43.0)", rotation angle = 0 Source counts = 650.1 +/- 55.8 Background counts = 2462.7 Rate = 0.06 +/- 0.005 [Thu Aug 9 20:52:30 2012] Source 3 is offset by 0.668046 and -2.295655 pixels which is larger than 2 X fitted extent = 0.877425 x 0.877425, not incorporating fit results [Thu Aug 9 20:52:30 2012] Vigneting correction estimate = 1.000000 [Thu Aug 9 20:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 9 20:52:30 2012] Assessing source extent using major axis lower bound [Thu Aug 9 20:52:30 2012] Source does appear to be extended [Thu Aug 9 20:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Aug 10 04:21:26 2012] XMMSAS src. selection expression = ellipse(27679.448000, 27520.888000, 1291.380037, 1291.380037, 0.000000, X, Y) [Fri Aug 10 04:21:26 2012] Writing source region out to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src3_src.reg [Fri Aug 10 04:21:26 2012] Extracting stamp from image fullrun_mos2_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (244, 243) - (393, 391) [Fri Aug 10 04:21:26 2012] XMMSAS bgd. selection expression = annulus(27679.448000, 27520.888000, 2152.300062, 4304.600124, X, Y) && !ellipse(28180.422000, 32620.734000, 2807.984081, 1241.440036, 114.935000, X, Y) && !ellipse(28007.724000, 32460.256000, 2028.240058, 1034.088030, 90.000000, X, Y) && !ellipse(28367.928101, 26530.947845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27966.524841, 30746.125458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.718120, 27351.650600, 725.749621, 725.749621, 0.000000, X, Y) && !ellipse(28040.693085, 27877.010529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27644.310000, 31688.892000, 972.600028, 972.600028, 0.000000, X, Y) && !ellipse(28343.896000, 25086.186000, 1201.376035, 1201.376035, 0.000000, X, Y) && !ellipse(27951.530000, 21266.280000, 2697.440078, 2697.440078, 0.000000, X, Y) && !ellipse(28894.672000, 24940.104000, 1269.512037, 1269.512037, 0.000000, X, Y) && !ellipse(27411.769745, 29179.143097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27877.589325, 28657.774994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27152.706800, 30996.763800, 1361.544039, 1361.544039, 0.000000, X, Y) && !ellipse(28425.250000, 22674.228000, 1155.888033, 1155.888033, 0.000000, X, Y) && !ellipse(26758.943176, 27703.461884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28449.559200, 22264.884000, 1347.448039, 1347.448039, 0.000000, X, Y) && !ellipse(27305.532000, 31869.600000, 1449.416042, 1449.416042, 0.000000, X, Y) && !ellipse(32759.742000, 26864.652000, 1466.560042, 1466.560042, 0.000000, X, Y) && !ellipse(29238.594513, 24494.537720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28058.311859, 24457.112427, 870.000000, 870.000000, 0.000000, X, Y) [Fri Aug 10 04:21:26 2012] Writing fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src3.gif [Fri Aug 10 04:34:50 2012] Mean detx,y = (475.12, 647.25) [Fri Aug 10 04:34:52 2012] Setting backscal keywords in source and bgd. spectrum [Fri Aug 10 04:35:27 2012] Binned source spectrum to 10 counts/bin [Fri Aug 10 04:35:28 2012] Setting source spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Fri Aug 10 04:35:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src3_bgd.pi.gz [Fri Aug 10 07:06:11 2012] Updating aperture counts using extracted products [Fri Aug 10 07:06:11 2012] Error reading totcts from fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Fri Aug 10 07:06:11 2012] Calculating source flux in energy range 0.30-8.00 [Fri Aug 10 07:06:11 2012] Using photon index=1.80, rate=0.0557, arf fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src3.arf [Fri Aug 10 07:06:11 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Aug 10 07:06:11 2012] Updating source flux to 5.1e-13 [Fri Aug 10 07:09:26 2012] Flag b found in src. 3 procflags, skipping spectral fitting [Fri Aug 10 07:09:26 2012] Flag c found in src. 3 procflags, skipping spectral fitting