[Wed Aug  8 15:12:55 2012] Detection parameters:
  Position = (238.7, 298.8) = 20 52 2.09 30 59 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.3 +/- 20.2
  Background counts = 150.9
  Rate = 0.01 +/- 0.002

[Wed Aug  8 15:12:58 2012] Off-axis axis estimate = 4.33'
[Thu Aug  9 01:40:07 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 01:40:07 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Thu Aug  9 01:40:07 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.020
[Thu Aug  9 01:40:07 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.59"
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src43.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src43.csv
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src43.csv
[Thu Aug  9 05:25:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu Aug  9 05:25:38 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Thu Aug  9 05:26:26 2012] Warning, spatial fit 43 centroid is now closest to src. 27
[Thu Aug  9 05:26:26 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:26 2012] Assessing source extent using major
[Thu Aug  9 05:26:26 2012] Source does appear to be extended
[Thu Aug  9 05:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 17:01:34 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 17:01:34 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Thu Aug  9 17:01:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.020
[Thu Aug  9 17:01:34 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 8.59"
[Thu Aug  9 20:51:44 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src33.ximg exists
[Thu Aug  9 20:51:44 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Aug  9 20:51:44 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src33 appears to have run properly
[Thu Aug  9 20:51:47 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Aug  9 20:51:47 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Aug  9 20:51:47 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Aug  9 20:52:30 2012] Source 26 is offset by 1.760842 and 4.098583 pixels which is larger than
2 X fitted extent = 2.339554 x 2.339554, not incorporating fit results
[Thu Aug  9 20:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:30 2012] Assessing source extent using major
[Thu Aug  9 20:52:30 2012] Source does appear to be extended
[Thu Aug  9 20:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 20:52:30 2012] Source is confused with source 32
[Fri Aug 10 04:21:27 2012] XMMSAS src. selection expression = ellipse(20717.757217, 25947.000702, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 04:21:27 2012] Writing source region out to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src26_src.reg
[Fri Aug 10 04:21:27 2012] Extracting stamp from image fullrun_mos2_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (201, 261) - (276, 336)
[Fri Aug 10 04:21:27 2012] XMMSAS bgd. selection expression = annulus(20717.757217, 25947.000702, 1087.500000, 2175.000000, X, Y) && !ellipse(20110.943800, 24495.902000, 1351.904039, 1351.904039, 0.000000, X, Y) && !ellipse(19892.276749, 25260.994232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20112.391600, 24743.996000, 2337.904067, 1597.784046, 90.000000, X, Y) && !ellipse(21047.211838, 24837.105530, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 04:21:27 2012] Writing fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src26.gif
[Fri Aug 10 04:56:23 2012] Mean detx,y = (5764.27, -4136.66) 
[Fri Aug 10 04:56:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 04:56:40 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 04:56:40 2012] Setting source spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Aug 10 04:56:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Aug 10 06:41:40 2012] Not generating rmf since there are only 92 counts
[Fri Aug 10 06:41:40 2012] rmf not generated due to insufficient counts
[Fri Aug 10 07:06:11 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:11 2012] Error reading totcts from fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Aug 10 07:06:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:12 2012] Using photon index=1.80, rate=0.0106, arf fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src26.arf
[Fri Aug 10 07:06:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:12 2012] Updating source flux to 1.5e-13
[Fri Aug 10 07:09:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting