[Wed Aug  8 15:12:55 2012] Detection parameters:
  Position = (321.0, 330.0) = 20 51 34.25 31 1 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.7 +/- 24.3
  Background counts = 170.6
  Rate = 0.01 +/- 0.002

[Wed Aug  8 15:12:58 2012] Off-axis axis estimate = 2.81'
[Thu Aug  9 01:40:07 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 01:40:07 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Thu Aug  9 01:40:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.756
[Thu Aug  9 01:40:07 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.83"
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src27.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src27.csv
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src27.csv
[Thu Aug  9 05:25:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Aug  9 05:25:38 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Aug  9 05:25:38 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Aug  9 05:26:26 2012] Warning, spatial fit 27 centroid is now closest to src. 25
[Thu Aug  9 05:26:26 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:26 2012] Assessing source extent using major
[Thu Aug  9 05:26:26 2012] Source does appear to be extended
[Thu Aug  9 05:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 17:01:34 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 17:01:34 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Thu Aug  9 17:01:34 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.756
[Thu Aug  9 17:01:34 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.83"
[Thu Aug  9 20:51:43 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src21.ximg exists
[Thu Aug  9 20:51:43 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Aug  9 20:51:43 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_src21 appears to have run properly
[Thu Aug  9 20:51:46 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Aug  9 20:51:46 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Aug  9 20:51:46 2012] Fit fullrun_mos2_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu Aug  9 20:52:30 2012] Source 23 is offset by -0.785502 and -5.368540 pixels which is larger than
2 X fitted extent = 0.900892 x 0.900892, not incorporating fit results
[Thu Aug  9 20:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:30 2012] Assessing source extent using major
[Thu Aug  9 20:52:30 2012] Source does appear to be extended
[Thu Aug  9 20:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 20:52:30 2012] Source is confused with source 3
[Fri Aug 10 04:21:27 2012] XMMSAS src. selection expression = ellipse(27877.589325, 28657.774994, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 04:21:27 2012] Writing source region out to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src23_src.reg
[Fri Aug 10 04:21:27 2012] Extracting stamp from image fullrun_mos2_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (283, 292) - (358, 367)
[Fri Aug 10 04:21:27 2012] XMMSAS bgd. selection expression = annulus(27877.589325, 28657.774994, 1087.500000, 2175.000000, X, Y) && !ellipse(28180.422000, 32620.734000, 2807.984081, 1241.440036, 114.935000, X, Y) && !ellipse(28007.724000, 32460.256000, 2028.240058, 1034.088030, 90.000000, X, Y) && !ellipse(28367.928101, 26530.947845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27966.524841, 30746.125458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.718120, 27351.650600, 725.749621, 725.749621, 0.000000, X, Y) && !ellipse(27679.448000, 27520.888000, 1721.840050, 1721.840050, 0.000000, X, Y) && !ellipse(28040.693085, 27877.010529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27644.310000, 31688.892000, 972.600028, 972.600028, 0.000000, X, Y) && !ellipse(27411.769745, 29179.143097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27152.706800, 30996.763800, 1361.544039, 1361.544039, 0.000000, X, Y) && !ellipse(26758.943176, 27703.461884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27305.532000, 31869.600000, 1449.416042, 1449.416042, 0.000000, X, Y)
[Fri Aug 10 04:21:27 2012] Writing fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src23.gif
[Fri Aug 10 04:53:54 2012] Mean detx,y = (795.55, 1677.94) 
[Fri Aug 10 04:53:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 04:54:05 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 04:54:05 2012] Setting source spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Aug 10 04:54:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Aug 10 06:23:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 06:23:26 2012] rmf not generated due to insufficient counts
[Fri Aug 10 07:06:11 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:11 2012] Error reading totcts from fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Aug 10 07:06:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:12 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos2_xmm0082540401_pi300-10000_pass1_cl_src23.arf
[Fri Aug 10 07:06:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:12 2012] Updating source flux to 1.4e-13
[Fri Aug 10 07:09:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting