[Wed Aug  8 15:12:54 2012] Detection parameters:
  Position = (327.7, 392.2) = 20 51 31.96 31 5 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.6 +/- 17.2
  Background counts = 121.3
  Rate = 0.02 +/- 0.003

[Wed Aug  8 15:12:58 2012] Off-axis axis estimate = 7.12'
[Thu Aug  9 01:40:07 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 01:40:07 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Thu Aug  9 01:40:07 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.767
[Thu Aug  9 01:40:07 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.99"
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src18.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src18.csv
[Thu Aug  9 05:25:36 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Aug  9 05:25:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src18.csv
[Thu Aug  9 05:25:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:25:37 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Aug  9 05:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Aug  9 05:25:37 2012] fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Aug  9 05:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Aug  9 05:25:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:26:26 2012] Spatial fit model total counts = 3181.590000, observed total counts = 3125.000000
[Thu Aug  9 05:26:26 2012] Offset between fit and detection position for source 11 = 8.160962 pixels
[Thu Aug  9 05:26:26 2012] Warning, changing simple spatial fit ID from 18 to 1
[Thu Aug  9 05:26:26 2012] 3069.380023 total counts/ 3069.380000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 8.160962 pixels
  Position = (333.2, 386.2) = 20 51 30.12 31 5 33.2
  Extent = 18.9 (18.8-37.7)", rotation angle = 0
  Source counts = 0.0 +/- 55.4
  Background counts = 3069.4
  Rate = 2e-09 +/- 0.005
  Deleting source due to low Poisson probability