[Wed Aug  8 15:11:56 2012] Detection parameters:
  Position = (336.0, 231.0) = 20 51 29.20 30 54 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.9 +/- 18.2
  Background counts = 110.1
  Rate = 0.008 +/- 0.002

[Wed Aug  8 15:11:56 2012] Off-axis axis estimate = 5.60'
[Wed Aug  8 21:48:14 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 21:48:14 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Wed Aug  8 21:48:14 2012] source mask rpix=2.1, npix_max = 27, mask sum = 33, frac = 1.201
[Wed Aug  8 21:48:14 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 9.23"
[Thu Aug  9 01:40:06 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src51.ximg exists
[Thu Aug  9 01:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src51.csv
[Thu Aug  9 01:40:06 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu Aug  9 01:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src51.csv
[Thu Aug  9 01:40:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 01:40:07 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu Aug  9 01:40:07 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu Aug  9 01:40:07 2012] Fit fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Thu Aug  9 05:26:12 2012] Source 56 is offset by 0.965015 and -7.490926 pixels which is larger than
2 X fitted extent = 3.666441 x 3.666441, not incorporating fit results
[Thu Aug  9 05:26:12 2012] Spatial fit model total counts = 1588.980000, observed total counts = 1599.000000
[Thu Aug  9 05:26:12 2012] Offset between fit and detection position for source 56 = 6.319680 pixels
[Thu Aug  9 05:26:12 2012] 1588.424000 total counts/ 1333.800000 bgd. counts: snr = 6.971945
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 6.319680 pixels
  Position = (339.3, 225.6) = 20 51 28.07 30 53 54.8
  Extent = 18.5 (18.4-36.9)", rotation angle = 0
  Source counts = 254.6 +/- 39.9
  Background counts = 1333.8
  Rate = 0.02 +/- 0.003
[Thu Aug  9 05:26:12 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:12 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 05:26:12 2012] Source does appear to be extended
[Thu Aug  9 05:26:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 05:26:12 2012] Source is confused with source 27
[Thu Aug  9 14:21:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 14:21:24 2012] Initial guess for spatial extent in simple fitting = 18.45"
[Thu Aug  9 14:21:24 2012] source mask rpix=4.2, npix_max = 89, mask sum = 50, frac = 0.556
[Thu Aug  9 14:21:24 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 18.45"
[Thu Aug  9 17:01:33 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_src39.ximg exists
[Thu Aug  9 17:01:33 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Aug  9 17:01:33 2012] Fit fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_src39 appears to have run properly
[Thu Aug  9 17:01:33 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Aug  9 17:01:33 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Aug  9 17:01:33 2012] Fit fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Aug  9 20:52:19 2012] Spatial fit model total counts = 3824.890000, observed total counts = 3702.000000
[Thu Aug  9 20:52:19 2012] Offset between fit and detection position for source 56 = 6.543300 pixels
[Thu Aug  9 20:52:19 2012] 3752.658000 total counts/ 3497.880000 bgd. counts: snr = 4.307839
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 6.543300 pixels
  Position = (337.5, 219.3) = 20 51 28.68 30 53 27.5
  Extent = 14.5 (13.2-29.0)" x 9.9 (6.3-13.8)", rotation angle = 76 (51-90) degrees
  Source counts = 254.8 +/- 61.3
  Background counts = 3497.9
  Rate = 0.02 +/- 0.005
[Thu Aug  9 20:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:19 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 20:52:19 2012] Source does appear to be extended
[Thu Aug  9 20:52:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Fri Aug 10 02:39:04 2012] XMMSAS src. selection expression = ellipse(29313.804800, 19033.548000, 869.928025, 596.336417, 75.615000, X, Y)
[Fri Aug 10 02:39:04 2012] Writing source region out to fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src56_src.reg
[Fri Aug 10 02:39:04 2012] Extracting stamp from image fullrun_mos1_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (288, 169) - (387, 269)
[Fri Aug 10 02:39:04 2012] XMMSAS bgd. selection expression = annulus(29313.804800, 19033.548000, 1449.880042, 2899.760083, X, Y) && !ellipse(29349.888060, 18798.943600, 1118.488032, 608.653618, 40.853800, X, Y) && !ellipse(28927.719260, 20722.248200, 577.209617, 577.209617, 0.000000, X, Y) && !ellipse(27993.291600, 21695.697400, 872.664025, 872.664025, 0.000000, X, Y) && !ellipse(28402.597000, 22408.689600, 1312.768038, 1312.768038, 0.000000, X, Y) && !ellipse(27716.474182, 20843.587021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28747.169830, 21527.782761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28419.103790, 21077.894684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.422882, 20782.221329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26644.866000, 21440.243200, 1348.880039, 1348.880039, 0.000000, X, Y)
[Fri Aug 10 02:39:04 2012] Writing fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src56.gif
[Fri Aug 10 02:53:16 2012] Mean detx,y = (-5875.24, 4875.84) 
[Fri Aug 10 02:53:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 02:53:56 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 02:53:56 2012] Setting source spectrum file to fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Aug 10 02:53:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Fri Aug 10 07:06:09 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:09 2012] Error reading totcts from fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Aug 10 07:06:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:10 2012] Using photon index=1.80, rate=0.0219, arf fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src56.arf
[Fri Aug 10 07:06:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:10 2012] Updating source flux to 3e-13
[Fri Aug 10 07:06:14 2012] Flag b found in src. 56 procflags, skipping spectral fitting
[Fri Aug 10 07:06:14 2012] Flag c found in src. 56 procflags, skipping spectral fitting