[Wed Aug  8 15:11:56 2012] Detection parameters:
  Position = (319.1, 240.1) = 20 51 34.88 30 54 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.3 +/- 20.7
  Background counts = 117.5
  Rate = 0.01 +/- 0.002

[Wed Aug  8 15:11:56 2012] Off-axis axis estimate = 4.49'
[Wed Aug  8 21:48:14 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 21:48:14 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Wed Aug  8 21:48:14 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Wed Aug  8 21:48:14 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.67"
[Thu Aug  9 01:40:06 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src30.ximg exists
[Thu Aug  9 01:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src30.csv
[Thu Aug  9 01:40:06 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Aug  9 01:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src30.csv
[Thu Aug  9 01:40:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 01:40:07 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Aug  9 01:40:07 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Aug  9 01:40:07 2012] Fit fullrun_mos1_xmm0082540401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Aug  9 05:26:12 2012] Source 54 is offset by 0.339077 and 6.558288 pixels which is larger than
2 X fitted extent = 0.996685 x 0.996685, not incorporating fit results
[Thu Aug  9 05:26:12 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:26:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:26:12 2012] Assessing source extent using major
[Thu Aug  9 05:26:12 2012] Source does appear to be extended
[Thu Aug  9 05:26:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 14:21:24 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 14:21:24 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Thu Aug  9 14:21:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Thu Aug  9 14:21:24 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 8.67"
[Thu Aug  9 17:01:32 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_src23.ximg exists
[Thu Aug  9 17:01:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_src23.csv
[Thu Aug  9 17:01:32 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Aug  9 17:01:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_src23.csv
[Thu Aug  9 17:01:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 17:01:33 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Aug  9 17:01:33 2012] fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Aug  9 17:01:33 2012] Fit fullrun_mos1_xmm0082540401_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Aug  9 20:52:19 2012] Source 54 is offset by 0.380349 and 6.625184 pixels which is larger than
2 X fitted extent = 0.996685 x 0.996685, not incorporating fit results
[Thu Aug  9 20:52:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 20:52:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 20:52:19 2012] Assessing source extent using major
[Thu Aug  9 20:52:19 2012] Source does appear to be extended
[Thu Aug  9 20:52:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 02:39:03 2012] XMMSAS src. selection expression = ellipse(27716.474182, 20843.587021, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 02:39:03 2012] Writing source region out to fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src54_src.reg
[Fri Aug 10 02:39:03 2012] Extracting stamp from image fullrun_mos1_xmm0082540401_pi300-10000_cl_sm2.00.img.gz, (282, 203) - (357, 278)
[Fri Aug 10 02:39:03 2012] XMMSAS bgd. selection expression = annulus(27716.474182, 20843.587021, 1087.500000, 2175.000000, X, Y) && !ellipse(29349.888060, 18798.943600, 1118.488032, 608.653618, 40.853800, X, Y) && !ellipse(28927.719260, 20722.248200, 577.209617, 577.209617, 0.000000, X, Y) && !ellipse(27993.291600, 21695.697400, 872.664025, 872.664025, 0.000000, X, Y) && !ellipse(28402.597000, 22408.689600, 1312.768038, 1312.768038, 0.000000, X, Y) && !ellipse(28747.169830, 21527.782761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28419.103790, 21077.894684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.422882, 20782.221329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28872.559200, 23741.430000, 857.984025, 857.984025, 0.000000, X, Y) && !ellipse(26644.866000, 21440.243200, 1348.880039, 1348.880039, 0.000000, X, Y) && !ellipse(28288.694061, 23267.712402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29313.804800, 19033.548000, 1159.904033, 795.115223, 75.615000, X, Y)
[Fri Aug 10 02:39:03 2012] Writing fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src54.gif
[Fri Aug 10 02:46:46 2012] Mean detx,y = (-5001.25, 2596.04) 
[Fri Aug 10 02:46:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 02:47:16 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 02:47:17 2012] Setting source spectrum file to fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Fri Aug 10 02:47:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Fri Aug 10 04:04:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 04:04:36 2012] rmf not generated due to insufficient counts
[Fri Aug 10 07:06:09 2012] Updating aperture counts using extracted products
[Fri Aug 10 07:06:09 2012] Error reading totcts from fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Fri Aug 10 07:06:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 07:06:10 2012] Using photon index=1.80, rate=0.0122, arf fullrun_mos1_xmm0082540401_pi300-10000_pass1_cl_src54.arf
[Fri Aug 10 07:06:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 07:06:10 2012] Updating source flux to 1.5e-13
[Fri Aug 10 07:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting