[Thu Jun 28 10:24:10 2012] Detection parameters:
  Position = (372.8, 140.2) = 20 52 33.08 31 3 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.8 +/- 23.0
  Background counts = 66.7
  Rate = 0.02 +/- 0.002

[Thu Jun 28 10:24:10 2012] Off-axis axis estimate = 12.68'
[Thu Jun 28 13:41:59 2012] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 13:41:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 28 13:41:59 2012] Initial guess for spatial extent in simple fitting = 12.77"
[Thu Jun 28 13:41:59 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.038
[Thu Jun 28 13:41:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.77"
[Thu Jun 28 14:03:21 2012] fullrun_mos1_xmm0082540301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 28 14:03:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540301_pi300-10000_cl_pass0_src1.csv
[Thu Jun 28 14:03:21 2012] fullrun_mos1_xmm0082540301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 28 14:03:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540301_pi300-10000_cl_pass0_src1.csv
[Thu Jun 28 14:03:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 14:03:21 2012] fullrun_mos1_xmm0082540301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 28 14:03:21 2012] fullrun_mos1_xmm0082540301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 28 14:03:21 2012] Fit fullrun_mos1_xmm0082540301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 28 14:13:09 2012] Spatial fit model total counts = 1629.270000, observed total counts = 1621.000000
[Thu Jun 28 14:13:09 2012] Offset between fit and detection position for source 1 = 0.087408 pixels
[Thu Jun 28 14:13:09 2012] 1632.036000 total counts/ 1491.900000 bgd. counts: snr = 3.628105
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.087408 pixels
  Position = (372.7, 140.1) = 20 52 33.11 31 3 10.7
  Extent = 5.5 (4.3-7.1)", rotation angle = 0
  Source counts = 140.1 +/- 40.4
  Background counts = 1491.9
  Rate = 0.01 +/- 0.003
[Thu Jun 28 14:13:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 14:13:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 14:13:09 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 14:13:09 2012] Source does appear to be extended
[Thu Jun 28 14:13:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:37:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 15:37:03 2012] Initial guess for spatial extent in simple fitting = 5.47"
[Thu Jun 28 15:37:03 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.971
[Thu Jun 28 15:37:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.47"
[Thu Jun 28 15:42:27 2012] fullrun_mos1_xmm0082540301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 28 15:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 15:42:27 2012] fullrun_mos1_xmm0082540301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 28 15:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 15:42:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 15:42:27 2012] fullrun_mos1_xmm0082540301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 28 15:42:27 2012] fullrun_mos1_xmm0082540301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 28 15:42:27 2012] Fit fullrun_mos1_xmm0082540301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 28 15:51:11 2012] Spatial fit model total counts = 916.177000, observed total counts = 912.000000
[Thu Jun 28 15:51:11 2012] Offset between fit and detection position for source 1 = 0.112375 pixels
[Thu Jun 28 15:51:11 2012] 920.511000 total counts/ 795.333000 bgd. counts: snr = 4.438677
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.112375 pixels
  Position = (372.6, 140.1) = 20 52 33.14 31 3 10.5
  Extent = 4.9 (3.9-6.2)", rotation angle = 0
  Source counts = 125.2 +/- 30.3
  Background counts = 795.3
  Rate = 0.01 +/- 0.003
[Thu Jun 28 15:51:11 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 15:51:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 15:51:11 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 15:51:11 2012] Source does appear to be extended
[Thu Jun 28 15:51:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 16:42:37 2012] XMMSAS src. selection expression = ellipse(32368.900400, 12137.871800, 294.954608, 294.954608, 0.000000, X, Y)
[Thu Jun 28 16:42:37 2012] Writing source region out to fullrun_mos1_xmm0082540301_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 28 16:42:37 2012] Extracting stamp from image fullrun_mos1_xmm0082540301_pi300-10000_cl_sm2.00.img.gz, (356, 123) - (390, 157)
[Thu Jun 28 16:42:37 2012] XMMSAS bgd. selection expression = annulus(32368.900400, 12137.871800, 491.591014, 983.182028, X, Y)
[Thu Jun 28 16:42:37 2012] Writing fullrun_mos1_xmm0082540301_pi300-10000_pass1_cl_src1.gif
[Thu Jun 28 16:42:41 2012] Mean detx,y = (-10476.69, 10848.87) 
[Thu Jun 28 16:42:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 16:42:50 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 16:42:50 2012] Setting source spectrum file to fullrun_mos1_xmm0082540301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 16:42:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0082540301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 28 16:54:04 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:54:04 2012] Error reading totcts from fullrun_mos1_xmm0082540301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 16:54:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:54:04 2012] Using photon index=1.80, rate=0.0107, arf fullrun_mos1_xmm0082540301_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 16:54:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:54:04 2012] Updating source flux to 3.2e-13
[Thu Jun 28 16:54:13 2012] Reading fit data from xmm0082540301/analysis//spectral/fullrun_mos1_xmm0082540301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 28 16:54:13 2012] Spectral fit parameter nH value = 2.296e+21
[Thu Jun 28 16:54:13 2012] Spectral fit parameter PhoIndex value = 2.80988
[Thu Jun 28 16:54:13 2012] Failed to get F(0.3-8.0) from xmm0082540301/analysis//spectral/fullrun_mos1_xmm0082540301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 28 16:54:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:54:13 2012] Using Nh = 2.3e+21, photon index=2.81, rate=0.0107, arf fullrun_mos1_xmm0082540301_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 16:54:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:54:13 2012] Updating source flux to 2.6e-13