[Thu Aug  9 06:15:48 2012] Detection parameters:
  Position = (420.2, 402.0) = 20 53 33.10 31 37 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 528.4 +/- 36.8
  Background counts = 255.0
  Rate = 0.04 +/- 0.003

[Thu Aug  9 06:15:50 2012] Off-axis axis estimate = 11.59'
[Thu Aug  9 06:21:18 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 06:21:18 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Thu Aug  9 06:21:18 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.958
[Thu Aug  9 06:21:18 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.22"
[Thu Aug  9 11:11:23 2012] fullrun_pn_xmm0082540201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Aug  9 11:11:23 2012] fullrun_pn_xmm0082540201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Aug  9 11:11:23 2012] Fit fullrun_pn_xmm0082540201_pi300-10000_cl_pass0_src5 appears to have run properly
[Thu Aug  9 11:11:25 2012] fullrun_pn_xmm0082540201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Aug  9 11:11:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Aug  9 11:11:25 2012] fullrun_pn_xmm0082540201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Aug  9 11:11:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Aug  9 11:11:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 11:51:02 2012] Warning, spatial fit 5 centroid is now closest to src. 35
[Thu Aug  9 11:51:02 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 11:51:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 11:51:02 2012] Assessing source extent using major
[Thu Aug  9 11:51:02 2012] Source does appear to be extended
[Thu Aug  9 11:51:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 11:51:24 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 11:51:24 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Thu Aug  9 11:51:24 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.958
[Thu Aug  9 11:51:24 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.22"
[Thu Aug  9 16:03:08 2012] fullrun_pn_xmm0082540201_pi300-10000_cl_pass1_src5.ximg exists
[Thu Aug  9 16:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540201_pi300-10000_cl_pass1_src5.csv
[Thu Aug  9 16:03:08 2012] fullrun_pn_xmm0082540201_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Aug  9 16:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540201_pi300-10000_cl_pass1_src5.csv
[Thu Aug  9 16:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 16:03:11 2012] fullrun_pn_xmm0082540201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Aug  9 16:03:11 2012] fullrun_pn_xmm0082540201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Aug  9 16:03:11 2012] Fit fullrun_pn_xmm0082540201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Aug  9 16:30:43 2012] Spatial fit model total counts = 3148.850000, observed total counts = 2921.000000
[Thu Aug  9 16:30:43 2012] Offset between fit and detection position for source 8 = 0.271448 pixels
[Thu Aug  9 16:30:43 2012] 3152.922000 total counts/ 2815.330000 bgd. counts: snr = 6.362496
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.271448 pixels
  Position = (420.0, 401.9) = 20 53 33.19 31 37 33.8
  Extent = 6.9 (5.9-8.4)", rotation angle = 0
  Source counts = 337.6 +/- 56.2
  Background counts = 2815.3
  Rate = 0.03 +/- 0.005
[Thu Aug  9 16:30:44 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 16:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 16:30:44 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 16:30:44 2012] Source does appear to be extended
[Thu Aug  9 16:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 16:31:03 2012] XMMSAS src. selection expression = ellipse(36487.613000, 34915.985400, 413.309412, 413.309412, 0.000000, X, Y)
[Thu Aug  9 16:31:03 2012] Writing source region out to fullrun_pn_xmm0082540201_pi300-10000_pass1_cl_src8_src.reg
[Thu Aug  9 16:31:03 2012] Extracting stamp from image fullrun_pn_xmm0082540201_pi300-10000_cl_sm2.00.img.gz, (396, 378) - (444, 426)
[Thu Aug  9 16:31:03 2012] XMMSAS bgd. selection expression = annulus(36487.613000, 34915.985400, 688.849020, 1377.698040, X, Y) && !ellipse(34886.753600, 36269.365600, 1934.816056, 241.852007, 134.902100, X, Y) && !ellipse(34499.699677, 35722.345978, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 16:31:03 2012] Writing fullrun_pn_xmm0082540201_pi300-10000_pass1_cl_src8.gif
[Thu Aug  9 16:44:25 2012] Mean detx,y = (4037.80, -11436.05) 
[Thu Aug  9 16:44:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 16:44:55 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 16:44:56 2012] Setting source spectrum file to fullrun_pn_xmm0082540201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Aug  9 16:44:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0082540201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Aug  9 19:08:50 2012] Updating aperture counts using extracted products
[Thu Aug  9 19:08:50 2012] Error reading totcts from fullrun_pn_xmm0082540201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Aug  9 19:08:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 19:08:55 2012] Using photon index=1.80, rate=0.0297, arf fullrun_pn_xmm0082540201_pi300-10000_pass1_cl_src8.arf
[Thu Aug  9 19:08:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 19:08:55 2012] Updating source flux to 1.7e-13
[Thu Aug  9 19:17:20 2012] Reading fit data from xmm0082540201/analysis//spectral/fullrun_pn_xmm0082540201_pi300-10000_pass1_cl_src8_pl.csv
[Thu Aug  9 19:17:20 2012] Spectral fit parameter nH value = 1.04758e+22
[Thu Aug  9 19:17:20 2012] Spectral fit parameter PhoIndex value = 9.9804
[Thu Aug  9 19:17:20 2012] Failed to get F(0.3-8.0) from xmm0082540201/analysis//spectral/fullrun_pn_xmm0082540201_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Thu Aug  9 19:17:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 19:17:20 2012] Using Nh = 1e+22, photon index=9.98, rate=0.0297, arf fullrun_pn_xmm0082540201_pi300-10000_pass1_cl_src8.arf
[Thu Aug  9 19:17:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 19:17:20 2012] Updating source flux to 9.2e-14