[Sat May 11 07:53:53 2013] Detection parameters:
  Position = (193.8, 266.0) = 20 56 6.43 31 42 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 476.1 +/- 65.6
  Background counts = 972.0
  Rate = 0.05 +/- 0.007

[Sat May 11 07:54:05 2013] Off-axis axis estimate = 7.94'
[Sat May 11 07:55:10 2013] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:10 2013] Initial guess for spatial extent in simple fitting = 10.40"
[Sat May 11 07:55:10 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.658
[Sat May 11 07:55:10 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.40"
[Sat May 11 07:55:11 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src4.ximg exists
[Sat May 11 07:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src4.csv
[Sat May 11 07:55:11 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May 11 07:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src4.csv
[Sat May 11 07:55:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:14 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May 11 07:55:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 11 07:55:14 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 11 07:55:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 11 07:55:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:51 2013] Warning, spatial fit 4 centroid is now closest to src. 169
[Sat May 11 07:55:52 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:55:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:55:52 2013] Assessing source extent using major
[Sat May 11 07:55:52 2013] Source does appear to be extended
[Sat May 11 07:55:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:55:52 2013] Source is confused with source 11
[Sat May 11 07:55:52 2013] Source is confused with source 169
[Sat May 11 07:56:51 2013] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:51 2013] Initial guess for spatial extent in simple fitting = 10.40"
[Sat May 11 07:56:51 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.658
[Sat May 11 07:56:51 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.40"
[Sat May 11 07:56:52 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 11 07:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src4.csv
[Sat May 11 07:56:52 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 11 07:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src4.csv
[Sat May 11 07:56:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:55 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 11 07:56:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 11 07:56:55 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 11 07:56:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 11 07:56:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:29 2013] Warning, spatial fit 4 centroid is now closest to src. 169
[Sat May 11 07:57:30 2013] Source 7 is offset by -0.167381 and 2.760949 pixels which is larger than
2 X fitted extent = 1.277775 x 1.277775, not incorporating fit results
[Sat May 11 07:57:30 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:30 2013] Assessing source extent using major
[Sat May 11 07:57:30 2013] Source does appear to be extended
[Sat May 11 07:57:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:58:22 2013] XMMSAS src. selection expression = ellipse(16809.601883, 23091.094543, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 07:58:22 2013] Not overwriting source region fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_src.reg
[Sat May 11 07:58:22 2013] Extracting stamp from image fullrun_pn_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (156, 228) - (231, 303)
[Sat May 11 07:58:22 2013] XMMSAS bgd. selection expression = annulus(16809.601883, 23091.094543, 1087.500000, 2175.000000, X, Y) && !ellipse(17099.789948, 22869.675720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15691.393814, 22916.698944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16145.825974, 22739.990814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16867.392578, 23518.971100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18862.884720, 23314.417023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19130.357681, 22828.801544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17893.752563, 22721.604736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19021.776276, 22473.532074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18657.378815, 22306.520111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17425.990829, 22483.310547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15506.323669, 22324.938049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18213.443314, 22308.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16797.570618, 22071.961548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19188.419189, 21783.484650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19647.248077, 21798.854614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17753.702423, 21877.285507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17173.792252, 21453.335739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15913.124603, 21668.798004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18657.385452, 21706.726425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17579.187347, 21192.497696, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 07:58:22 2013] Writing fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7.gif
[Sat May 11 07:58:34 2013] ../../xmm0082540101/products/events/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0082540101/products/events/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat May 11 07:58:34 2013] Mean detx,y = (-7827.22, 8257.79) 
[Sat May 11 07:58:34 2013] ../../xmm0082540101/products/images/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0082540101/products/images/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat May 11 07:58:34 2013] ../../xmm0082540101/products/spectra/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat May 11 07:58:34 2013] Setting source spectrum file to fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat May 11 07:58:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat May 11 07:58:34 2013] ../../xmm0082540101/products/lightcurves/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat May 11 07:59:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 07:59:10 2013] rmf not generated due to insufficient counts
[Sat May 11 07:59:10 2013] fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Sat May 11 11:28:20 2013] Updating aperture counts using extracted products
[Sat May 11 11:28:20 2013] Total counts from fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 3818.00
[Sat May 11 11:28:20 2013] Total counts from fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 11700.00
[Sat May 11 11:28:20 2013] Got source and background scale factors 1092072.000000, 3773720.000000
[Sat May 11 11:28:20 2013] User source parameters:
  Position = (193.8, 266.0) = 20 56 6.43 31 42 50.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 432.2 +/- 62.8
  Background aperture counts = 3385.8
  Rate = 0.1 +/- 0.02

[Sat May 11 11:28:20 2013] Updating counts from extracted products
[Sat May 11 11:28:20 2013] Set source signif. to 432.15/58.19 = 7.43
[Sat May 11 11:29:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:15 2013] Using photon index=1.80, rate=0.117, arf fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7.arf
[Sat May 11 11:29:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:15 2013] Updating source flux to 2.4e-12
[Sat May 11 11:30:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:31:23 2013] xmm0082540101/analysis//spectral/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete