[Sat May 11 07:53:56 2013] Detection parameters:
  Position = (374.5, 404.9) = 20 55 4.78 31 53 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.6 +/- 22.2
  Background counts = 274.2
  Rate = 0.02 +/- 0.002

[Sat May 11 07:54:05 2013] Off-axis axis estimate = 9.49'
[Sat May 11 07:55:10 2013] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:10 2013] Initial guess for spatial extent in simple fitting = 11.17"
[Sat May 11 07:55:10 2013] source mask rpix=2.6, npix_max = 37, mask sum = 27, frac = 0.717
[Sat May 11 07:55:10 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 11.17"
[Sat May 11 07:55:12 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src53.ximg exists
[Sat May 11 07:55:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src53.csv
[Sat May 11 07:55:12 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sat May 11 07:55:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src53.csv
[Sat May 11 07:55:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:15 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sat May 11 07:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat May 11 07:55:15 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sat May 11 07:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat May 11 07:55:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:52 2013] Spatial fit model total counts = 2910.500000, observed total counts = 2484.000000
[Sat May 11 07:55:52 2013] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 07:55:52 2013] Spatial fit model total counts = 2626.240000, observed total counts = 2418.000000
[Sat May 11 07:55:52 2013] Offset between fit and detection position for source 61 = 3.163841 pixels
[Sat May 11 07:55:52 2013] Warning, changing simple spatial fit ID from 53 to 55
[Sat May 11 07:55:52 2013] 2623.823900 total counts/ 2591.990000 bgd. counts: snr = 0.625278
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 3.163841 pixels
  Position = (372.1, 402.9) = 20 55 5.61 31 53 1.4
  Extent = 5.6 (2.7-21.6)", rotation angle = 0
  Source counts = 31.8 +/- 51.2
  Background counts = 2592.0
  Rate = 0.009 +/- 0.01
  Deleting source due to low Poisson probability