[Sat May 11 07:53:54 2013] Detection parameters:
  Position = (284.4, 514.2) = 20 55 35.56 32 1 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.1 +/- 23.1
  Background counts = 128.2
  Rate = 0.02 +/- 0.002

[Sat May 11 07:54:05 2013] Off-axis axis estimate = 15.67'
[Sat May 11 07:55:10 2013] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 07:55:10 2013] Initial guess for spatial extent in simple fitting = 14.27"
[Sat May 11 07:55:10 2013] source mask rpix=3.3, npix_max = 57, mask sum = 38, frac = 0.665
[Sat May 11 07:55:10 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 14.27"
[Sat May 11 07:55:11 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src12.ximg exists
[Sat May 11 07:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src12.csv
[Sat May 11 07:55:11 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat May 11 07:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src12.csv
[Sat May 11 07:55:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:14 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat May 11 07:55:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat May 11 07:55:14 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat May 11 07:55:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat May 11 07:55:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:51 2013] Warning, spatial fit 12 centroid is now closest to src. 36
[Sat May 11 07:55:51 2013] Spatial fit model total counts = 1865.160000, observed total counts = 1540.000000
[Sat May 11 07:55:51 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 07:55:52 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:55:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:55:52 2013] Assessing source extent using major
[Sat May 11 07:55:52 2013] Source does appear to be extended
[Sat May 11 07:55:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:55:52 2013] Source is confused with source 19
[Sat May 11 07:55:52 2013] Source is confused with source 20
[Sat May 11 07:56:51 2013] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:51 2013] Initial guess for spatial extent in simple fitting = 14.27"
[Sat May 11 07:56:51 2013] source mask rpix=3.3, npix_max = 57, mask sum = 38, frac = 0.665
[Sat May 11 07:56:51 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 14.27"
[Sat May 11 07:56:52 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src11.ximg exists
[Sat May 11 07:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src11.csv
[Sat May 11 07:56:52 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat May 11 07:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src11.csv
[Sat May 11 07:56:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:55 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat May 11 07:56:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat May 11 07:56:55 2013] fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat May 11 07:56:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat May 11 07:56:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:29 2013] Warning, spatial fit 11 centroid is now closest to src. 36
[Sat May 11 07:57:30 2013] Spatial fit model total counts = 1648.780000, observed total counts = 1362.000000
[Sat May 11 07:57:30 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 07:57:30 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:30 2013] Assessing source extent using major
[Sat May 11 07:57:30 2013] Source does appear to be extended
[Sat May 11 07:57:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:58:23 2013] XMMSAS src. selection expression = ellipse(24692.430328, 44683.263672, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 07:58:23 2013] Not overwriting source region fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_src.reg
[Sat May 11 07:58:23 2013] Extracting stamp from image fullrun_pn_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (247, 477) - (322, 552)
[Sat May 11 07:58:23 2013] XMMSAS bgd. selection expression = annulus(24692.430328, 44683.263672, 1087.500000, 2175.000000, X, Y) && !ellipse(24266.622040, 43653.316742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25091.234314, 44477.976807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24432.343658, 44160.737976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.120819, 45167.105591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25569.736969, 44921.164917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25841.176544, 43736.878479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26446.723200, 43598.095200, 1119.952032, 1119.952032, 0.000000, X, Y) && !ellipse(21219.324000, 41263.748000, 2105.384061, 2105.384061, 0.000000, X, Y)
[Sat May 11 07:58:23 2013] Writing fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18.gif
[Sat May 11 07:58:35 2013] ../../xmm0082540101/products/events/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0082540101/products/events/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sat May 11 07:58:35 2013] Mean detx,y = (-10946.43, -14481.29) 
[Sat May 11 07:58:35 2013] ../../xmm0082540101/products/images/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_src.img and ../../xmm0082540101/products/images/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Sat May 11 07:58:35 2013] ../../xmm0082540101/products/spectra/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sat May 11 07:58:35 2013] Setting source spectrum file to fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May 11 07:58:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat May 11 07:58:35 2013] ../../xmm0082540101/products/lightcurves/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sat May 11 07:59:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 07:59:10 2013] rmf not generated due to insufficient counts
[Sat May 11 07:59:10 2013] fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Sat May 11 11:28:23 2013] Updating aperture counts using extracted products
[Sat May 11 11:28:23 2013] Total counts from fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 633.00
[Sat May 11 11:28:23 2013] Total counts from fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 2041.00
[Sat May 11 11:28:23 2013] Got source and background scale factors 1034035.000000, 5550505.000000
[Sat May 11 11:28:23 2013] User source parameters:
  Position = (284.4, 514.2) = 20 55 35.56 32 1 5.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 252.8 +/- 26.2
  Background aperture counts = 380.2
  Rate = 0.07 +/- 0.007

[Sat May 11 11:28:23 2013] Updating counts from extracted products
[Sat May 11 11:28:23 2013] Set source signif. to 252.77/19.50 = 12.96
[Sat May 11 11:29:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:15 2013] Using photon index=1.80, rate=0.0686, arf fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18.arf
[Sat May 11 11:29:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:15 2013] Updating source flux to 9.4e-13
[Sat May 11 11:30:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:31:23 2013] xmm0082540101/analysis//spectral/fullrun_pn_xmm0082540101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete