[Sat May 11 07:54:11 2013] Detection parameters:
  Position = (131.7, 261.0) = 20 56 27.60 31 42 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.8 +/- 28.5
  Background counts = 260.4
  Rate = 0.01 +/- 0.002

[Sat May 11 07:54:14 2013] Off-axis axis estimate = 12.39'
[Sat May 11 07:55:20 2013] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:20 2013] Initial guess for spatial extent in simple fitting = 12.62"
[Sat May 11 07:55:20 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.907
[Sat May 11 07:55:20 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 12.62"
[Sat May 11 07:55:22 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src51.ximg exists
[Sat May 11 07:55:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src51.csv
[Sat May 11 07:55:22 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat May 11 07:55:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src51.csv
[Sat May 11 07:55:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:24 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat May 11 07:55:24 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat May 11 07:55:24 2013] Fit fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sat May 11 07:56:21 2013] Warning, spatial fit 51 centroid is now closest to src. 12
[Sat May 11 07:56:21 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:21 2013] Assessing source extent using major
[Sat May 11 07:56:21 2013] Source does appear to be extended
[Sat May 11 07:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:21 2013] Source is confused with source 10
[Sat May 11 07:57:01 2013] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:57:01 2013] Initial guess for spatial extent in simple fitting = 12.62"
[Sat May 11 07:57:01 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.907
[Sat May 11 07:57:01 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 12.62"
[Sat May 11 07:57:03 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src46.ximg exists
[Sat May 11 07:57:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src46.csv
[Sat May 11 07:57:03 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src46_1.ximg exists
[Sat May 11 07:57:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src46.csv
[Sat May 11 07:57:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:04 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sat May 11 07:57:04 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sat May 11 07:57:04 2013] Fit fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Sat May 11 07:57:54 2013] Warning, spatial fit 46 centroid is now closest to src. 12
[Sat May 11 07:57:54 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:54 2013] Assessing source extent using major
[Sat May 11 07:57:54 2013] Source does appear to be extended
[Sat May 11 07:57:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:27:30 2013] XMMSAS src. selection expression = ellipse(11407.713791, 22656.819366, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 11:27:30 2013] Not overwriting source region fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_src.reg
[Sat May 11 11:27:30 2013] Extracting stamp from image fullrun_mos2_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (94, 223) - (169, 298)
[Sat May 11 11:27:30 2013] XMMSAS bgd. selection expression = annulus(11407.713791, 22656.819366, 1087.500000, 2175.000000, X, Y) && !ellipse(12045.765121, 20843.419754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11560.561172, 21787.784470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11868.824677, 22397.598236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12311.574707, 22047.304291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11956.557465, 23207.228180, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 11:27:30 2013] Writing fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9.gif
[Sat May 11 11:27:32 2013] ../../xmm0082540101/products/events/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0082540101/products/events/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sat May 11 11:27:32 2013] Mean detx,y = (12218.82, -11344.46) 
[Sat May 11 11:27:32 2013] ../../xmm0082540101/products/images/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_src.img and ../../xmm0082540101/products/images/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Sat May 11 11:27:32 2013] ../../xmm0082540101/products/spectra/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sat May 11 11:27:32 2013] Setting source spectrum file to fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 11 11:27:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat May 11 11:27:32 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sat May 11 11:27:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 11:27:39 2013] rmf not generated due to insufficient counts
[Sat May 11 11:27:39 2013] fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Sat May 11 11:29:48 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:48 2013] Total counts from fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 1830.00
[Sat May 11 11:29:48 2013] Total counts from fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 4805.00
[Sat May 11 11:29:48 2013] Got source and background scale factors 1055864.000000, 2160932.000000
[Sat May 11 11:29:48 2013] User source parameters:
  Position = (131.7, 261.0) = 20 56 27.60 31 42 44.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -517.8 +/- 43.8
  Background aperture counts = 2347.8
  Rate = -0.04 +/- 0.003

[Sat May 11 11:29:48 2013] Updating counts from extracted products
[Sat May 11 11:29:48 2013] Set source signif. to -517.80/48.45 = -10.69
[Sat May 11 11:29:52 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:52 2013] Using photon index=1.80, rate=-0.0355, arf fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9.arf
[Sat May 11 11:29:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:52 2013] Updated flux is not positive, keeping original flux
[Sat May 11 11:30:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:30:59 2013] xmm0082540101/analysis//spectral/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete