[Sat May 11 07:54:10 2013] Detection parameters:
  Position = (199.4, 268.0) = 20 56 4.52 31 43 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 271.7 +/- 51.9
  Background counts = 448.8
  Rate = 0.02 +/- 0.004

[Sat May 11 07:54:14 2013] Off-axis axis estimate = 7.51'
[Sat May 11 07:55:20 2013] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:20 2013] Initial guess for spatial extent in simple fitting = 10.19"
[Sat May 11 07:55:20 2013] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.836
[Sat May 11 07:55:20 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.19"
[Sat May 11 07:55:21 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src19.ximg exists
[Sat May 11 07:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src19.csv
[Sat May 11 07:55:21 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat May 11 07:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src19.csv
[Sat May 11 07:55:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:23 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat May 11 07:55:23 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat May 11 07:55:23 2013] Fit fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat May 11 07:56:21 2013] Warning, spatial fit 19 centroid is now closest to src. 29
[Sat May 11 07:56:21 2013] Source 5 is offset by 5.397016 and 0.000043 pixels which is larger than
2 X fitted extent = 1.246800 x 1.246800, not incorporating fit results
[Sat May 11 07:56:21 2013] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.308686 pixels away
[Sat May 11 07:56:21 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:21 2013] Assessing source extent using major
[Sat May 11 07:56:21 2013] Source does appear to be extended
[Sat May 11 07:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:21 2013] Source is confused with source 29
[Sat May 11 07:57:01 2013] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:57:01 2013] Initial guess for spatial extent in simple fitting = 10.19"
[Sat May 11 07:57:01 2013] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.836
[Sat May 11 07:57:01 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 10.19"
[Sat May 11 07:57:02 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src17.ximg exists
[Sat May 11 07:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src17.csv
[Sat May 11 07:57:02 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat May 11 07:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src17.csv
[Sat May 11 07:57:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:04 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat May 11 07:57:04 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat May 11 07:57:04 2013] Fit fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat May 11 07:57:54 2013] Warning, spatial fit 17 centroid is now closest to src. 34
[Sat May 11 07:57:54 2013] Spatial fit model total counts = 6599.880000, observed total counts = 6588.000000
[Sat May 11 07:57:54 2013] Offset between fit and detection position for source 5 = 5.397016 pixels
[Sat May 11 07:57:54 2013] Warning, changing simple spatial fit ID from 17 to 24
[Sat May 11 07:57:54 2013] 6496.660015 total counts/ 6496.660000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 5.397016 pixels
  Position = (194.0, 268.0) = 20 56 6.36 31 43 14.3
  Extent = 21.7 (2.7-40.7)", rotation angle = 0
  Source counts = 0.0 +/- 80.6
  Background counts = 6496.7
  Rate = 1e-09 +/- 0.006
  Deleting source due to low Poisson probability