[Sat May 11 07:54:10 2013] Detection parameters:
  Position = (139.0, 240.1) = 20 56 25.08 31 41 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.7 +/- 33.1
  Background counts = 324.1
  Rate = 0.01 +/- 0.002

[Sat May 11 07:54:14 2013] Off-axis axis estimate = 12.31'
[Sat May 11 07:55:20 2013] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 07:55:20 2013] Initial guess for spatial extent in simple fitting = 12.58"
[Sat May 11 07:55:20 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Sat May 11 07:55:20 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 12.58"
[Sat May 11 07:55:22 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src30.ximg exists
[Sat May 11 07:55:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src30.csv
[Sat May 11 07:55:22 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat May 11 07:55:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src30.csv
[Sat May 11 07:55:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:23 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat May 11 07:55:23 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat May 11 07:55:23 2013] Fit fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sat May 11 07:56:21 2013] Warning, spatial fit 30 centroid is now closest to src. 12
[Sat May 11 07:56:21 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:21 2013] Assessing source extent using major
[Sat May 11 07:56:21 2013] Source does appear to be extended
[Sat May 11 07:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:57:01 2013] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:57:01 2013] Initial guess for spatial extent in simple fitting = 12.58"
[Sat May 11 07:57:01 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Sat May 11 07:57:01 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 12.58"
[Sat May 11 07:57:02 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src26.ximg exists
[Sat May 11 07:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src26.csv
[Sat May 11 07:57:02 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat May 11 07:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src26.csv
[Sat May 11 07:57:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:04 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat May 11 07:57:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat May 11 07:57:04 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat May 11 07:57:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat May 11 07:57:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:54 2013] Warning, spatial fit 26 centroid is now closest to src. 12
[Sat May 11 07:57:54 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:54 2013] Assessing source extent using major
[Sat May 11 07:57:54 2013] Source does appear to be extended
[Sat May 11 07:57:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:27:29 2013] XMMSAS src. selection expression = ellipse(12045.765121, 20843.419754, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 11:27:29 2013] Not overwriting source region fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_src.reg
[Sat May 11 11:27:29 2013] Extracting stamp from image fullrun_mos2_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (102, 203) - (177, 278)
[Sat May 11 11:27:29 2013] XMMSAS bgd. selection expression = annulus(12045.765121, 20843.419754, 1087.500000, 2175.000000, X, Y) && !ellipse(11560.561172, 21787.784470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11868.824677, 22397.598236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12311.574707, 22047.304291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11407.713791, 22656.819366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11956.557465, 23207.228180, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 11:27:29 2013] Writing fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3.gif
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/events/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0082540101/products/events/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat May 11 11:27:31 2013] Mean detx,y = (10878.65, -12631.50) 
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/images/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0082540101/products/images/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/spectra/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat May 11 11:27:31 2013] Setting source spectrum file to fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 11 11:27:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat May 11 11:27:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 11:27:39 2013] rmf not generated due to insufficient counts
[Sat May 11 11:27:39 2013] fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Sat May 11 11:29:44 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:44 2013] Total counts from fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 2543.00
[Sat May 11 11:29:44 2013] Total counts from fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 9203.00
[Sat May 11 11:29:44 2013] Got source and background scale factors 1140654.000000, 4071097.000000
[Sat May 11 11:29:44 2013] User source parameters:
  Position = (139.0, 240.1) = 20 56 25.08 31 41 13.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -35.5 +/- 51.4
  Background aperture counts = 2578.5
  Rate = -0.002 +/- 0.004

[Sat May 11 11:29:44 2013] Updating counts from extracted products
[Sat May 11 11:29:44 2013] Set source signif. to -35.53/50.78 = -0.70
[Sat May 11 11:29:52 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:52 2013] Using photon index=1.80, rate=-0.00243, arf fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3.arf
[Sat May 11 11:29:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:52 2013] Updated flux is not positive, keeping original flux
[Sat May 11 11:30:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:30:59 2013] xmm0082540101/analysis//spectral/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete