[Sat May 11 07:54:10 2013] Detection parameters:
  Position = (163.5, 335.0) = 20 56 16.80 31 48 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.7 +/- 30.3
  Background counts = 241.8
  Rate = 0.02 +/- 0.002

[Sat May 11 07:54:14 2013] Off-axis axis estimate = 10.14'
[Sat May 11 07:55:20 2013] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 07:55:20 2013] Initial guess for spatial extent in simple fitting = 11.50"
[Sat May 11 07:55:20 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.063
[Sat May 11 07:55:20 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 11.50"
[Sat May 11 07:55:21 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src20.ximg exists
[Sat May 11 07:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src20.csv
[Sat May 11 07:55:21 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat May 11 07:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src20.csv
[Sat May 11 07:55:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:23 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat May 11 07:55:23 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat May 11 07:55:23 2013] Fit fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat May 11 07:56:21 2013] Warning, spatial fit 20 centroid is now closest to src. 19
[Sat May 11 07:56:21 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:21 2013] Assessing source extent using major
[Sat May 11 07:56:21 2013] Source does appear to be extended
[Sat May 11 07:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:21 2013] Source is confused with source 4
[Sat May 11 07:56:21 2013] Source is confused with source 21
[Sat May 11 07:56:21 2013] Source is confused with source 19
[Sat May 11 07:57:01 2013] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:57:01 2013] Initial guess for spatial extent in simple fitting = 11.50"
[Sat May 11 07:57:01 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.063
[Sat May 11 07:57:01 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 11.50"
[Sat May 11 07:57:02 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src18.ximg exists
[Sat May 11 07:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src18.csv
[Sat May 11 07:57:02 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat May 11 07:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src18.csv
[Sat May 11 07:57:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:04 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat May 11 07:57:04 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat May 11 07:57:04 2013] Fit fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat May 11 07:57:54 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.355202 pixels away
[Sat May 11 07:57:54 2013] Spatial fit model total counts = 7060.520000, observed total counts = 7008.000000
[Sat May 11 07:57:54 2013] Offset between fit and detection position for source 2 = 2.354003 pixels
[Sat May 11 07:57:54 2013] Warning, changing simple spatial fit ID from 18 to 45
[Sat May 11 07:57:54 2013] 6926.531000 total counts/ 6475.540000 bgd. counts: snr = 5.604410
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.354003 pixels
  Position = (164.7, 333.0) = 20 56 16.40 31 47 56.8
  Extent = 18.2 (13.1-22.9)", rotation angle = 0
  Source counts = 451.0 +/- 83.2
  Background counts = 6475.5
  Rate = 0.03 +/- 0.006
[Sat May 11 07:57:54 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:54 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:57:54 2013] Source does appear to be extended
[Sat May 11 07:57:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:27:29 2013] XMMSAS src. selection expression = ellipse(14276.912000, 28920.506000, 1090.758031, 1090.758031, 0.000000, X, Y)
[Sat May 11 11:27:29 2013] Not overwriting source region fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_src.reg
[Sat May 11 11:27:29 2013] Extracting stamp from image fullrun_mos2_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (102, 270) - (227, 396)
[Sat May 11 11:27:29 2013] XMMSAS bgd. selection expression = annulus(14276.912000, 28920.506000, 1817.930052, 3635.860105, X, Y) && !ellipse(13973.010000, 28479.752000, 1867.016054, 1867.016054, 0.000000, X, Y) && !ellipse(18194.499200, 32717.517000, 1475.624042, 638.174418, 340.475000, X, Y) && !ellipse(17403.883728, 32401.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16821.003906, 25314.684235, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(14949.190000, 28814.824000, 1773.160051, 819.536024, 28.896000, X, Y) && !ellipse(14817.763062, 28136.372375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15245.106000, 30101.756000, 1565.080045, 1565.080045, 0.000000, X, Y) && !ellipse(13496.997498, 27903.574097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12897.984000, 27362.724000, 1867.016054, 1867.016054, 0.000000, X, Y)
[Sat May 11 11:27:29 2013] Writing fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2.gif
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/events/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0082540101/products/events/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat May 11 11:27:31 2013] Mean detx,y = (12757.23, -4606.69) 
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/images/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0082540101/products/images/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/spectra/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat May 11 11:27:31 2013] Setting source spectrum file to fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 11 11:27:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat May 11 11:27:39 2013] fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Sat May 11 11:27:39 2013] fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sat May 11 11:29:42 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:42 2013] Total counts from fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 6401.00
[Sat May 11 11:29:42 2013] Total counts from fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 22987.00
[Sat May 11 11:29:42 2013] Got source and background scale factors 3640908.000000, 17185078.000000
[Sat May 11 11:29:42 2013] User source parameters:
  Position = (164.7, 333.0) = 20 56 16.40 31 47 56.8
  Extent = 18.2 (13.1-22.9)", rotation angle = 0
  Source aperture counts = 1530.9 +/- 81.0
  Background aperture counts = 4870.1
  Rate = 0.1 +/- 0.006

[Sat May 11 11:29:51 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:51 2013] Using photon index=1.80, rate=0.0309, arf fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2.arf
[Sat May 11 11:29:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:51 2013] Updating source flux to 8.3e-13
[Sat May 11 11:30:38 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat May 11 11:30:59 2013] xmm0082540101/analysis//spectral/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete