[Sat May 11 07:54:11 2013] Detection parameters:
  Position = (258.0, 344.0) = 20 55 44.54 31 48 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.9 +/- 37.1
  Background counts = 563.5
  Rate = 0.03 +/- 0.003

[Sat May 11 07:54:14 2013] Off-axis axis estimate = 4.42'
[Sat May 11 07:55:20 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:20 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Sat May 11 07:55:20 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.648
[Sat May 11 07:55:20 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.64"
[Sat May 11 07:55:21 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src4.ximg exists
[Sat May 11 07:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src4.csv
[Sat May 11 07:55:21 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May 11 07:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src4.csv
[Sat May 11 07:55:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:22 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May 11 07:55:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 11 07:55:22 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 11 07:55:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 11 07:55:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:21 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.957622 pixels away
[Sat May 11 07:56:21 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:21 2013] Assessing source extent using major
[Sat May 11 07:56:21 2013] Source does appear to be extended
[Sat May 11 07:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:57:01 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:57:01 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Sat May 11 07:57:01 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.648
[Sat May 11 07:57:01 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.64"
[Sat May 11 07:57:02 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 11 07:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src4.csv
[Sat May 11 07:57:02 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 11 07:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src4.csv
[Sat May 11 07:57:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:03 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 11 07:57:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 11 07:57:03 2013] fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 11 07:57:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 11 07:57:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:54 2013] Spatial fit model total counts = 6527.410000, observed total counts = 5708.000000
[Sat May 11 07:57:54 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 07:57:54 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:54 2013] Assessing source extent using major
[Sat May 11 07:57:54 2013] Source does appear to be extended
[Sat May 11 07:57:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:27:29 2013] XMMSAS src. selection expression = ellipse(22398.593872, 29878.682251, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 11:27:29 2013] Not overwriting source region fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_src.reg
[Sat May 11 11:27:29 2013] Extracting stamp from image fullrun_mos2_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (221, 306) - (296, 381)
[Sat May 11 11:27:29 2013] XMMSAS bgd. selection expression = annulus(22398.593872, 29878.682251, 1087.500000, 2175.000000, X, Y)
[Sat May 11 11:27:29 2013] Writing fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18.gif
[Sat May 11 11:27:30 2013] ../../xmm0082540101/products/events/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0082540101/products/events/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sat May 11 11:27:31 2013] Mean detx,y = (6090.80, 159.98) 
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/images/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_src.img and ../../xmm0082540101/products/images/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/spectra/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sat May 11 11:27:31 2013] Setting source spectrum file to fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May 11 11:27:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat May 11 11:27:31 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sat May 11 11:27:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 11:27:39 2013] rmf not generated due to insufficient counts
[Sat May 11 11:27:39 2013] fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Sat May 11 11:29:40 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:40 2013] Total counts from fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 4145.00
[Sat May 11 11:29:40 2013] Total counts from fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 30688.00
[Sat May 11 11:29:40 2013] Got source and background scale factors 1163776.000000, 10489099.000000
[Sat May 11 11:29:40 2013] User source parameters:
  Position = (258.0, 344.0) = 20 55 44.54 31 48 45.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 740.1 +/- 65.4
  Background aperture counts = 3404.9
  Rate = 0.05 +/- 0.004

[Sat May 11 11:29:40 2013] Updating counts from extracted products
[Sat May 11 11:29:40 2013] Set source signif. to 740.14/58.35 = 12.68
[Sat May 11 11:29:51 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:51 2013] Using photon index=1.80, rate=0.0507, arf fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18.arf
[Sat May 11 11:29:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:51 2013] Updating source flux to 8.5e-13
[Sat May 11 11:30:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:30:59 2013] xmm0082540101/analysis//spectral/fullrun_mos2_xmm0082540101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete