[Sat May 11 07:54:09 2013] Detection parameters:
  Position = (246.4, 320.4) = 20 55 48.51 31 47 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.2 +/- 33.2
  Background counts = 543.8
  Rate = 0.02 +/- 0.003

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 4.10'
[Sat May 11 07:55:16 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Sat May 11 07:55:16 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 8.48"
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src18.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src18.csv
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src18.csv
[Sat May 11 07:55:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 11 07:55:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:07 2013] Source 72 is offset by 4.906305 and 7.164304 pixels which is larger than
2 X fitted extent = 5.575311 x 0.974354, not incorporating fit results
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:58 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Sat May 11 07:56:58 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 8.48"
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src15.ximg exists
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat May 11 07:56:59 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src15 appears to have run properly
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat May 11 07:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:41 2013] Source 72 is offset by -0.600125 and -9.260064 pixels which is larger than
2 X fitted extent = 8.629517 x 8.629517, not incorporating fit results
[Sat May 11 07:57:41 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 10.783634 pixels away
[Sat May 11 07:57:41 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:41 2013] Assessing source extent using major
[Sat May 11 07:57:41 2013] Source does appear to be extended
[Sat May 11 07:57:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:59:11 2013] XMMSAS src. selection expression = ellipse(21385.016525, 27823.644440, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_src.reg
[Sat May 11 07:59:11 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (209, 283) - (284, 358)
[Sat May 11 07:59:11 2013] XMMSAS bgd. selection expression = annulus(21385.016525, 27823.644440, 1087.500000, 2175.000000, X, Y) && !ellipse(22463.026123, 29715.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.158000, 32803.338000, 3013.472087, 3013.472087, 0.000000, X, Y) && !ellipse(24386.180000, 25137.553000, 1110.048032, 1110.048032, 0.000000, X, Y) && !ellipse(17883.874600, 29468.464200, 1347.872039, 1347.872039, 0.000000, X, Y) && !ellipse(22462.949127, 28650.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20536.393494, 26072.618103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19418.449400, 27017.382200, 1466.232042, 766.836022, 92.266070, X, Y) && !ellipse(23580.714000, 24783.832560, 2405.536069, 2405.536069, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72.gif
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_bgd.evt exist, delete to re-create
[Sat May 11 07:59:14 2013] Mean detx,y = (-1876.98, -6142.92) 
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_bgd.img exist, delete to re-create
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_bgd.pi exist, delete to re-create
[Sat May 11 07:59:14 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Sat May 11 07:59:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_bgd.lc exist, delete to re-create
[Sat May 11 08:49:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 08:49:01 2013] rmf not generated due to insufficient counts
[Sat May 11 11:29:25 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:25 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_src_b10.pi.gz = 3533.00
[Sat May 11 11:29:25 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_bgd.pi.gz = 12561.00
[Sat May 11 11:29:25 2013] Got source and background scale factors 1094996.000000, 4337790.000000
[Sat May 11 11:29:25 2013] User source parameters:
  Position = (246.4, 320.4) = 20 55 48.51 31 47 2.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 362.2 +/- 60.4
  Background aperture counts = 3170.8
  Rate = 0.02 +/- 0.004

[Sat May 11 11:29:25 2013] Updating counts from extracted products
[Sat May 11 11:29:25 2013] Set source signif. to 362.20/56.31 = 6.43
[Sat May 11 11:29:37 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:37 2013] Using photon index=1.80, rate=0.0248, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72.arf
[Sat May 11 11:29:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:37 2013] Updating source flux to 4.3e-13
[Sat May 11 11:29:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete