[Sat May 11 07:54:09 2013] Detection parameters:
  Position = (206.9, 337.9) = 20 56 1.97 31 48 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.2 +/- 28.8
  Background counts = 371.3
  Rate = 0.02 +/- 0.004

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 7.23'
[Sat May 11 07:55:16 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Sat May 11 07:55:16 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.141
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 10.04"
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src21.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src21.csv
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src21.csv
[Sat May 11 07:55:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat May 11 07:55:19 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat May 11 07:56:07 2013] Spatial fit model total counts = 4035.220000, observed total counts = 4041.000000
[Sat May 11 07:56:07 2013] Offset between fit and detection position for source 70 = 1.576129 pixels
[Sat May 11 07:56:07 2013] 4005.328000 total counts/ 3534.750000 bgd. counts: snr = 7.915025
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 1.576129 pixels
  Position = (206.1, 339.3) = 20 56 2.25 31 48 24.5
  Extent = 16.8 (10.4-20.1)", rotation angle = 0
  Source counts = 470.6 +/- 63.3
  Background counts = 3534.8
  Rate = 0.03 +/- 0.004
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 16.85"
[Sat May 11 07:56:58 2013] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.941
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 16.85"
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src17.ximg exists
[Sat May 11 07:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src17.csv
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat May 11 07:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src17.csv
[Sat May 11 07:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat May 11 07:57:00 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat May 11 07:57:41 2013] Warning, spatial fit 17 centroid is now closest to src. 33
[Sat May 11 07:57:41 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:41 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:57:41 2013] Source does appear to be extended
[Sat May 11 07:57:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:59:11 2013] XMMSAS src. selection expression = ellipse(17883.874600, 29468.464200, 1010.904029, 1010.904029, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_src.reg
[Sat May 11 07:59:11 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (148, 281) - (264, 397)
[Sat May 11 07:59:11 2013] XMMSAS bgd. selection expression = annulus(17883.874600, 29468.464200, 1684.840048, 3369.680097, X, Y) && !ellipse(21385.016525, 27823.644440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20536.393494, 26072.618103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19418.449400, 27017.382200, 1466.232042, 766.836022, 92.266070, X, Y) && !ellipse(23580.714000, 24783.832560, 2405.536069, 2405.536069, 0.000000, X, Y) && !ellipse(13719.153091, 28308.513855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15121.995000, 27937.698400, 1475.936042, 1475.936042, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y) && !ellipse(14350.819077, 28328.673492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14356.440000, 29081.434300, 1846.048053, 1846.048053, 0.000000, X, Y) && !ellipse(14557.530800, 29521.519600, 1030.720030, 1030.720030, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70.gif
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_bgd.evt exist, delete to re-create
[Sat May 11 07:59:14 2013] Mean detx,y = (-2113.22, -10091.91) 
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_bgd.img exist, delete to re-create
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_bgd.pi exist, delete to re-create
[Sat May 11 07:59:14 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat May 11 07:59:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_bgd.lc exist, delete to re-create
[Sat May 11 11:29:26 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:26 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 6453.00
[Sat May 11 11:29:26 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_bgd.pi.gz = 33135.00
[Sat May 11 11:29:26 2013] Got source and background scale factors 3073368.000000, 16998646.000000
[Sat May 11 11:29:26 2013] User source parameters:
  Position = (206.1, 339.3) = 20 56 2.25 31 48 24.5
  Extent = 16.8 (10.4-20.1)", rotation angle = 0
  Source aperture counts = 462.2 +/- 81.3
  Background aperture counts = 5990.8
  Rate = 0.03 +/- 0.006

[Sat May 11 11:29:37 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:37 2013] Using photon index=1.80, rate=0.0323, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70.arf
[Sat May 11 11:29:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:38 2013] Updating source flux to 6.5e-13
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete