[Sat May 11 07:54:05 2013] Detection parameters:
  Position = (131.3, 262.0) = 20 56 27.74 31 42 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.8 +/- 33.5
  Background counts = 216.1
  Rate = 0.02 +/- 0.002

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 12.40'
[Sat May 11 07:55:16 2013] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 12.63"
[Sat May 11 07:55:16 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.842
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 12.63"
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src9.csv
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src9.csv
[Sat May 11 07:55:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 11 07:55:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:07 2013] Warning, spatial fit 9 centroid is now closest to src. 9
[Sat May 11 07:56:07 2013] Spatial fit model total counts = 29228.100000, observed total counts = 3001.000000
[Sat May 11 07:56:07 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 07:56:08 2013] Source 6 is offset by 8.299256 and 1.996841 pixels which is larger than
2 X fitted extent = 1.379177 x 1.379177, not incorporating fit results
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:08 2013] Source is confused with source 18
[Sat May 11 07:56:08 2013] Source is confused with source 19
[Sat May 11 07:56:58 2013] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 12.63"
[Sat May 11 07:56:58 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.842
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 12.63"
[Sat May 11 07:56:58 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src7.ximg exists
[Sat May 11 07:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src7.csv
[Sat May 11 07:56:58 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat May 11 07:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src7.csv
[Sat May 11 07:56:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May 11 07:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:41 2013] Warning, spatial fit 7 centroid is now closest to src. 22
[Sat May 11 07:57:41 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 17.458114 pixels away
[Sat May 11 07:57:41 2013] Source 6 is offset by 4.086658 and -2.688102 pixels which is larger than
2 X fitted extent = 1.477549 x 1.477549, not incorporating fit results
[Sat May 11 07:57:41 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:41 2013] Assessing source extent using major
[Sat May 11 07:57:41 2013] Source does appear to be extended
[Sat May 11 07:57:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:59:11 2013] XMMSAS src. selection expression = ellipse(11371.629288, 22748.131134, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_src.reg
[Sat May 11 07:59:11 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (94, 225) - (169, 300)
[Sat May 11 07:59:11 2013] XMMSAS bgd. selection expression = annulus(11371.629288, 22748.131134, 1087.500000, 2175.000000, X, Y) && !ellipse(15614.320000, 22159.792000, 3415.952098, 3415.952098, 0.000000, X, Y) && !ellipse(11619.348831, 21941.703156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12269.087400, 21659.500000, 1346.688039, 1346.688039, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y) && !ellipse(11237.266000, 25586.888000, 1975.592057, 1975.592057, 0.000000, X, Y) && !ellipse(12449.775620, 21913.654099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12168.376000, 21843.536000, 1994.312057, 1994.312057, 0.000000, X, Y) && !ellipse(11218.998000, 23395.660000, 1335.184038, 1335.184038, 0.000000, X, Y) && !ellipse(11801.923248, 22651.490723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11606.268829, 21555.320724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11638.693375, 20972.715698, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6.gif
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sat May 11 07:59:14 2013] Mean detx,y = (-11011.27, -12582.03) 
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sat May 11 07:59:14 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 11 07:59:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sat May 11 08:29:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 08:29:59 2013] rmf not generated due to insufficient counts
[Sat May 11 11:29:23 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:23 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 1820.00
[Sat May 11 11:29:23 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 259.00
[Sat May 11 11:29:23 2013] Got source and background scale factors 992382.000000, 126158.000000
[Sat May 11 11:29:24 2013] User source parameters:
  Position = (131.3, 262.0) = 20 56 27.74 31 42 41.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -217.3 +/- 43.7
  Background aperture counts = 2037.3
  Rate = -0.01 +/- 0.003

[Sat May 11 11:29:24 2013] Updating counts from extracted products
[Sat May 11 11:29:24 2013] Set source signif. to -217.34/45.14 = -4.82
[Sat May 11 11:29:37 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:37 2013] Using photon index=1.80, rate=-0.0149, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6.arf
[Sat May 11 11:29:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:37 2013] Updated flux is not positive, keeping original flux
[Sat May 11 11:29:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete