[Sat May 11 07:54:08 2013] Detection parameters:
  Position = (258.8, 342.1) = 20 55 44.29 31 48 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.5 +/- 34.2
  Background counts = 520.6
  Rate = 0.02 +/- 0.003

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 4.28'
[Sat May 11 07:55:16 2013] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 8.57"
[Sat May 11 07:55:16 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.57"
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src10.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src10.csv
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src10.csv
[Sat May 11 07:55:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May 11 07:55:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:07 2013] Warning, spatial fit 10 centroid is now closest to src. 71
[Sat May 11 07:56:07 2013] Source 54 is offset by -5.283769 and 5.620305 pixels which is larger than
2 X fitted extent = 1.591320 x 1.591320, not incorporating fit results
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:58 2013] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 8.57"
[Sat May 11 07:56:58 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.57"
[Sat May 11 07:56:58 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src8.ximg exists
[Sat May 11 07:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src8.csv
[Sat May 11 07:56:58 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat May 11 07:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src8.csv
[Sat May 11 07:56:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat May 11 07:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:41 2013] Spatial fit model total counts = 3947.480000, observed total counts = 4778.000000
[Sat May 11 07:57:41 2013] Poor agreement between spatial fit and data for source 54
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 07:57:41 2013] Source 54 is offset by -5.286045 and 5.626696 pixels which is larger than
2 X fitted extent = 1.598924 x 1.598924, not incorporating fit results
[Sat May 11 07:57:41 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:41 2013] Assessing source extent using major
[Sat May 11 07:57:41 2013] Source does appear to be extended
[Sat May 11 07:57:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:59:11 2013] XMMSAS src. selection expression = ellipse(22463.026123, 29715.870544, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_src.reg
[Sat May 11 07:59:11 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (221, 305) - (296, 380)
[Sat May 11 07:59:11 2013] XMMSAS bgd. selection expression = annulus(22463.026123, 29715.870544, 1087.500000, 2175.000000, X, Y) && !ellipse(26129.158000, 32803.338000, 3013.472087, 3013.472087, 0.000000, X, Y) && !ellipse(21385.016525, 27823.644440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26642.004000, 33253.160000, 3013.888087, 3013.888087, 0.000000, X, Y) && !ellipse(22462.949127, 28650.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19418.449400, 27017.382200, 1466.232042, 766.836022, 92.266070, X, Y)
[Sat May 11 07:59:11 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54.gif
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_bgd.evt exist, delete to re-create
[Sat May 11 07:59:14 2013] Mean detx,y = (297.12, -6107.11) 
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_bgd.img exist, delete to re-create
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_bgd.pi exist, delete to re-create
[Sat May 11 07:59:14 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sat May 11 07:59:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_bgd.lc exist, delete to re-create
[Sat May 11 08:30:14 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 08:30:14 2013] rmf not generated due to insufficient counts
[Sat May 11 11:29:24 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:24 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 3730.00
[Sat May 11 11:29:24 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_bgd.pi.gz = 20814.00
[Sat May 11 11:29:24 2013] Got source and background scale factors 1137648.000000, 7671681.000000
[Sat May 11 11:29:24 2013] User source parameters:
  Position = (258.8, 342.1) = 20 55 44.29 31 48 38.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 643.5 +/- 62.1
  Background aperture counts = 3086.5
  Rate = 0.04 +/- 0.004

[Sat May 11 11:29:24 2013] Updating counts from extracted products
[Sat May 11 11:29:24 2013] Set source signif. to 643.45/55.56 = 11.58
[Sat May 11 11:29:37 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:37 2013] Using photon index=1.80, rate=0.0441, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54.arf
[Sat May 11 11:29:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:37 2013] Updating source flux to 7.1e-13
[Sat May 11 11:29:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete