[Sat May 11 07:54:05 2013] Detection parameters:
  Position = (130.7, 269.8) = 20 56 27.93 31 43 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.0 +/- 29.4
  Background counts = 220.7
  Rate = 0.01 +/- 0.002

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 12.33'
[Sat May 11 07:55:16 2013] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 12.60"
[Sat May 11 07:55:16 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.062
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 12.60"
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src41.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src41.csv
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src41.csv
[Sat May 11 07:55:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sat May 11 07:55:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:08 2013] Warning, spatial fit 41 centroid is now closest to src. 17
[Sat May 11 07:56:08 2013] Spatial fit model total counts = 4575.640000, observed total counts = 4450.000000
[Sat May 11 07:56:08 2013] Offset between fit and detection position for source 5 = 4.455217 pixels
[Sat May 11 07:56:08 2013] Warning, changing simple spatial fit ID from 41 to 58
[Sat May 11 07:56:08 2013] 4521.907200 total counts/ 4477.760000 bgd. counts: snr = 0.659740
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 4.455217 pixels
  Position = (128.8, 265.8) = 20 56 28.59 31 43 4.4
  Extent = 10.2 (7.0-20.3)", rotation angle = 0
  Source counts = 44.1 +/- 67.2
  Background counts = 4477.8
  Rate = 0.003 +/- 0.005
  Deleting source due to low Poisson probability