[Sat May 11 07:54:08 2013] Detection parameters:
  Position = (421.7, 144.9) = 20 54 48.78 31 34 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.3 +/- 19.0
  Background counts = 88.6
  Rate = 0.007 +/- 0.001

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 14.28'
[Sat May 11 07:55:16 2013] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 13.57"
[Sat May 11 07:55:16 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.069
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 76 for pass 0, mean size = 13.57"
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src76.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src76.csv
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src76_1.ximg exists
[Sat May 11 07:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src76.csv
[Sat May 11 07:55:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Sat May 11 07:55:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src76.csv
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Sat May 11 07:55:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src76.csv
[Sat May 11 07:55:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:08 2013] Spatial fit model total counts = 1244.310000, observed total counts = 1083.000000
[Sat May 11 07:56:08 2013] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:08 2013] Deleting source due to low Poisson probability 0.9