[Sat May 11 07:54:07 2013] Detection parameters:
  Position = (352.7, 494.0) = 20 55 12.20 31 59 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.5 +/- 24.0
  Background counts = 144.4
  Rate = 0.01 +/- 0.002

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 14.72'
[Sat May 11 07:55:16 2013] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 13.79"
[Sat May 11 07:55:16 2013] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.040
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 13.79"
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src60.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src60.csv
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src60_1.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src60.csv
[Sat May 11 07:55:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sat May 11 07:55:20 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Sat May 11 07:56:08 2013] Warning, spatial fit 60 centroid is now closest to src. 44
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:58 2013] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 13.79"
[Sat May 11 07:56:58 2013] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.040
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 13.79"
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src51.ximg exists
[Sat May 11 07:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src51.csv
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat May 11 07:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src51.csv
[Sat May 11 07:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:01 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat May 11 07:57:01 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat May 11 07:57:01 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sat May 11 07:57:41 2013] Source 38 is offset by 0.628058 and -4.014551 pixels which is larger than
2 X fitted extent = 1.130736 x 1.130736, not incorporating fit results
[Sat May 11 07:57:41 2013] Spatial fit model total counts = 2492.640000, observed total counts = 2358.000000
[Sat May 11 07:57:41 2013] Offset between fit and detection position for source 38 = 6.718203 pixels
[Sat May 11 07:57:41 2013] 2447.080000 total counts/ 1077.780000 bgd. counts: snr = 41.709362
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 6.718203 pixels
  Position = (346.0, 493.2) = 20 55 14.49 31 59 34.4
  Extent = 27.6 (27.6-55.1)", rotation angle = 0
  Source counts = 1369.3 +/- 49.5
  Background counts = 1077.8
  Rate = 0.09 +/- 0.003
[Sat May 11 07:57:42 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:42 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:57:42 2013] Source does appear to be extended
[Sat May 11 07:57:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:57:42 2013] Source is confused with source 25
[Sat May 11 07:59:13 2013] Counts = 1369.300000, rescaling region sizes by 2.000000
[Sat May 11 07:59:13 2013] XMMSAS src. selection expression = ellipse(30053.790000, 42862.758600, 3308.736095, 3308.736095, 0.000000, X, Y)
[Sat May 11 07:59:13 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_src.reg
[Sat May 11 07:59:13 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (156, 303) - (536, 595)
[Sat May 11 07:59:13 2013] XMMSAS bgd. selection expression = annulus(30053.790000, 42862.758600, 11029.120317, 22058.240635, X, Y) && !ellipse(28702.095398, 34941.807190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27112.019592, 34674.405914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26118.879180, 26577.840800, 521.772015, 521.772015, 0.000000, X, Y) && !ellipse(19186.503586, 23068.330322, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(33380.795990, 26686.362640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18746.870560, 22162.117050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11371.629288, 22748.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22463.026123, 29715.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29472.333200, 34681.920000, 1617.920047, 410.312012, 90.000000, X, Y) && !ellipse(26129.158000, 32803.338000, 3013.472087, 3013.472087, 0.000000, X, Y) && !ellipse(16445.728000, 22633.682000, 1728.992050, 1728.992050, 0.000000, X, Y) && !ellipse(16781.900000, 22803.560000, 1707.976049, 1707.976049, 0.000000, X, Y) && !ellipse(28087.206543, 34424.238434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21385.016525, 27823.644440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24386.180000, 25137.553000, 1110.048032, 1110.048032, 0.000000, X, Y) && !ellipse(17883.874600, 29468.464200, 1347.872039, 1347.872039, 0.000000, X, Y) && !ellipse(26642.004000, 33253.160000, 3013.888087, 3013.888087, 0.000000, X, Y) && !ellipse(22462.949127, 28650.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32942.140015, 26894.463837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20536.393494, 26072.618103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.066000, 33371.452000, 1506.736043, 1506.736043, 0.000000, X, Y) && !ellipse(15614.320000, 22159.792000, 3415.952098, 3415.952098, 0.000000, X, Y) && !ellipse(19418.449400, 27017.382200, 1466.232042, 766.836022, 92.266070, X, Y) && !ellipse(31332.198200, 27383.913600, 1121.024032, 1121.024032, 0.000000, X, Y) && !ellipse(19333.038000, 21422.369600, 1595.768046, 1595.768046, 0.000000, X, Y) && !ellipse(11619.348831, 21941.703156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32552.486000, 34989.864000, 1752.312050, 1752.312050, 0.000000, X, Y) && !ellipse(23580.714000, 24783.832560, 2405.536069, 2405.536069, 0.000000, X, Y) && !ellipse(17751.636810, 21846.481857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29841.413000, 42410.781200, 1246.272036, 327.709609, 0.452523, X, Y) && !ellipse(12269.087400, 21659.500000, 1346.688039, 1346.688039, 0.000000, X, Y) && !ellipse(17909.865936, 21265.240189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13719.153091, 28308.513855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24940.787079, 25178.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.120000, 34050.111120, 1629.464047, 1629.464047, 0.000000, X, Y) && !ellipse(27215.771800, 33534.641244, 1536.448044, 1536.448044, 0.000000, X, Y) && !ellipse(15121.995000, 27937.698400, 1475.936042, 1475.936042, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y) && !ellipse(16754.241867, 22145.244339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14350.819077, 28328.673492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14356.440000, 29081.434300, 1846.048053, 1846.048053, 0.000000, X, Y) && !ellipse(14557.530800, 29521.519600, 1030.720030, 1030.720030, 0.000000, X, Y) && !ellipse(11237.266000, 25586.888000, 1975.592057, 1975.592057, 0.000000, X, Y) && !ellipse(12449.775620, 21913.654099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15389.838000, 21836.378000, 1637.768047, 1637.768047, 0.000000, X, Y) && !ellipse(12168.376000, 21843.536000, 1994.312057, 1994.312057, 0.000000, X, Y) && !ellipse(27375.158000, 24890.794300, 2255.888065, 2255.888065, 0.000000, X, Y) && !ellipse(11218.998000, 23395.660000, 1335.184038, 1335.184038, 0.000000, X, Y) && !ellipse(11801.923248, 22651.490723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22446.087036, 39153.737701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11710.908844, 26057.776489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37133.074400, 39938.566200, 3297.040095, 3297.040095, 0.000000, X, Y) && !ellipse(21816.400000, 38597.600000, 1940.928056, 1940.928056, 0.000000, X, Y) && !ellipse(11606.268829, 21555.320724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11638.693375, 20972.715698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36252.418000, 39237.048000, 2186.416063, 2186.416063, 0.000000, X, Y) && !ellipse(19045.020000, 39611.030000, 3633.200105, 1395.000040, 332.909000, X, Y) && !ellipse(16261.680000, 36222.021600, 1977.592057, 1977.592057, 0.000000, X, Y) && !ellipse(18201.612000, 39116.520000, 1736.496050, 1736.496050, 0.000000, X, Y) && !ellipse(18856.314000, 39566.022600, 1841.984053, 1841.984053, 0.000000, X, Y)
[Sat May 11 07:59:13 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38.gif
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Sat May 11 07:59:16 2013] Mean detx,y = (14278.84, -5009.85) 
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Sat May 11 07:59:16 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat May 11 07:59:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Sat May 11 11:29:33 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:33 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 17508.00
[Sat May 11 11:29:33 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 376345.00
[Sat May 11 11:29:33 2013] Got source and background scale factors 16802510.000000, 258436950.000000
[Sat May 11 11:29:34 2013] User source parameters:
  Position = (346.0, 493.2) = 20 55 14.49 31 59 34.4
  Extent = 27.6 (27.6-55.1)", rotation angle = 0
  Source aperture counts = -6960.4 +/- 133.3
  Background aperture counts = 24468.4
  Rate = -0.5 +/- 0.009

[Sat May 11 11:29:39 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:39 2013] Using photon index=1.80, rate=0.0939, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38.arf
[Sat May 11 11:29:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:39 2013] Updating source flux to 2.8e-12
[Sat May 11 11:29:58 2013] Flag b found in src. 38 procflags, skipping spectral fitting
[Sat May 11 11:29:58 2013] Flag c found in src. 38 procflags, skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete