[Sat May 11 07:54:07 2013] Detection parameters:
  Position = (135.2, 300.1) = 20 56 26.44 31 45 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.6 +/- 26.0
  Background counts = 189.0
  Rate = 0.009 +/- 0.002

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 11.84'
[Sat May 11 07:55:16 2013] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 12.35"
[Sat May 11 07:55:16 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.942
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 12.35"
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src65.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src65.csv
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src65.csv
[Sat May 11 07:55:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sat May 11 07:55:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sat May 11 07:55:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sat May 11 07:55:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:08 2013] Warning, spatial fit 65 centroid is now closest to src. 17
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:58 2013] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 12.35"
[Sat May 11 07:56:58 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.942
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 12.35"
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src56.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src56.csv
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src56_1.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src56.csv
[Sat May 11 07:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:01 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Sat May 11 07:57:01 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Sat May 11 07:57:01 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Sat May 11 07:57:41 2013] Source 36 is offset by -7.306289 and -2.551121 pixels which is larger than
2 X fitted extent = 1.431949 x 1.431949, not incorporating fit results
[Sat May 11 07:57:41 2013] Warning, spatial fit 56 centroid is now closest to src. 17
[Sat May 11 07:57:42 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:42 2013] Assessing source extent using major
[Sat May 11 07:57:42 2013] Source does appear to be extended
[Sat May 11 07:57:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:57:42 2013] Source is confused with source 17
[Sat May 11 07:59:13 2013] XMMSAS src. selection expression = ellipse(11710.908844, 26057.776489, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 07:59:13 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_src.reg
[Sat May 11 07:59:13 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (98, 263) - (173, 338)
[Sat May 11 07:59:13 2013] XMMSAS bgd. selection expression = annulus(11710.908844, 26057.776489, 1087.500000, 2175.000000, X, Y) && !ellipse(15614.320000, 22159.792000, 3415.952098, 3415.952098, 0.000000, X, Y) && !ellipse(13719.153091, 28308.513855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15121.995000, 27937.698400, 1475.936042, 1475.936042, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y) && !ellipse(14350.819077, 28328.673492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14356.440000, 29081.434300, 1846.048053, 1846.048053, 0.000000, X, Y) && !ellipse(11237.266000, 25586.888000, 1975.592057, 1975.592057, 0.000000, X, Y) && !ellipse(11218.998000, 23395.660000, 1335.184038, 1335.184038, 0.000000, X, Y)
[Sat May 11 07:59:13 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36.gif
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Sat May 11 07:59:16 2013] Mean detx,y = (-8029.02, -13910.99) 
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Sat May 11 07:59:16 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat May 11 07:59:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Sat May 11 10:55:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 10:55:07 2013] rmf not generated due to insufficient counts
[Sat May 11 11:29:34 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:34 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 1811.00
[Sat May 11 11:29:34 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_bgd.pi.gz = 4656.00
[Sat May 11 11:29:34 2013] Got source and background scale factors 1344000.000000, 3798150.000000
[Sat May 11 11:29:34 2013] User source parameters:
  Position = (135.2, 300.1) = 20 56 26.44 31 45 35.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 163.4 +/- 43.6
  Background aperture counts = 1647.6
  Rate = 0.01 +/- 0.003

[Sat May 11 11:29:34 2013] Updating counts from extracted products
[Sat May 11 11:29:34 2013] Set source signif. to 163.44/40.59 = 4.03
[Sat May 11 11:29:39 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:39 2013] Using photon index=1.80, rate=0.0112, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36.arf
[Sat May 11 11:29:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:39 2013] Updating source flux to 4.2e-13
[Sat May 11 11:29:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete