[Sat May 11 07:54:06 2013] Detection parameters:
  Position = (188.1, 259.1) = 20 56 8.36 31 42 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.4 +/- 37.7
  Background counts = 508.4
  Rate = 0.02 +/- 0.003

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 8.49'
[Sat May 11 07:55:16 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Sat May 11 07:55:16 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.031
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.67"
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src14.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src14.csv
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src14.csv
[Sat May 11 07:55:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May 11 07:55:19 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat May 11 07:56:07 2013] Warning, spatial fit 14 centroid is now closest to src. 20
[Sat May 11 07:56:08 2013] Spatial fit model total counts = 6312.860000, observed total counts = 6308.000000
[Sat May 11 07:56:08 2013] Offset between fit and detection position for source 21 = 2.224373 pixels
[Sat May 11 07:56:08 2013] Warning, changing simple spatial fit ID from 14 to 57
[Sat May 11 07:56:08 2013] 6048.054000 total counts/ 5353.330000 bgd. counts: snr = 9.495116
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.224373 pixels
  Position = (190.2, 259.8) = 20 56 7.65 31 42 38.8
  Extent = 21.6 (21.6-43.2)", rotation angle = 0
  Source counts = 694.7 +/- 77.8
  Background counts = 5353.3
  Rate = 0.05 +/- 0.005
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:08 2013] Source is confused with source 20
[Sat May 11 07:56:08 2013] Source is confused with source 23
[Sat May 11 07:56:08 2013] Source is confused with source 42
[Sat May 11 07:56:08 2013] Source is confused with source 58
[Sat May 11 07:56:08 2013] Source is confused with source 43
[Sat May 11 07:56:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 21.61"
[Sat May 11 07:56:58 2013] source mask rpix=5.0, npix_max = 119, mask sum = 121, frac = 1.012
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 21.61"
[Sat May 11 07:56:58 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src11.ximg exists
[Sat May 11 07:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src11.csv
[Sat May 11 07:56:58 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat May 11 07:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src11.csv
[Sat May 11 07:56:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat May 11 07:57:00 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat May 11 07:57:41 2013] Warning, spatial fit 11 centroid is now closest to src. 42
[Sat May 11 07:57:41 2013] Source 21 is offset by 2.009028 and 0.703425 pixels which is larger than
2 X fitted extent = 1.214497 x 1.214497, not incorporating fit results
[Sat May 11 07:57:41 2013] Spatial fit model total counts = 6306.730000, observed total counts = 6308.000000
[Sat May 11 07:57:41 2013] Offset between fit and detection position for source 21 = 1.079784 pixels
[Sat May 11 07:57:41 2013] Warning, changing simple spatial fit ID from 11 to 48
[Sat May 11 07:57:41 2013] 5924.819000 total counts/ 5158.200000 bgd. counts: snr = 10.674081
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.079784 pixels
  Position = (189.6, 260.7) = 20 56 7.86 31 42 42.7
  Extent = 21.6 (21.6-43.2)", rotation angle = 0
  Source counts = 766.6 +/- 77.0
  Background counts = 5158.2
  Rate = 0.05 +/- 0.005
[Sat May 11 07:57:41 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:41 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:57:41 2013] Source does appear to be extended
[Sat May 11 07:57:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:59:11 2013] XMMSAS src. selection expression = ellipse(16445.728000, 22633.682000, 1296.744037, 1296.744037, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_src.reg
[Sat May 11 07:59:11 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (115, 186) - (264, 335)
[Sat May 11 07:59:11 2013] XMMSAS bgd. selection expression = annulus(16445.728000, 22633.682000, 2161.240062, 4322.480124, X, Y) && !ellipse(19186.503586, 23068.330322, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18746.870560, 22162.117050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11371.629288, 22748.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16781.900000, 22803.560000, 1707.976049, 1707.976049, 0.000000, X, Y) && !ellipse(21385.016525, 27823.644440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20536.393494, 26072.618103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15614.320000, 22159.792000, 3415.952098, 3415.952098, 0.000000, X, Y) && !ellipse(19418.449400, 27017.382200, 1466.232042, 766.836022, 92.266070, X, Y) && !ellipse(19333.038000, 21422.369600, 1595.768046, 1595.768046, 0.000000, X, Y) && !ellipse(11619.348831, 21941.703156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17751.636810, 21846.481857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12269.087400, 21659.500000, 1346.688039, 1346.688039, 0.000000, X, Y) && !ellipse(17909.865936, 21265.240189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15121.995000, 27937.698400, 1475.936042, 1475.936042, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y) && !ellipse(16754.241867, 22145.244339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11237.266000, 25586.888000, 1975.592057, 1975.592057, 0.000000, X, Y) && !ellipse(12449.775620, 21913.654099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15389.838000, 21836.378000, 1637.768047, 1637.768047, 0.000000, X, Y) && !ellipse(12168.376000, 21843.536000, 1994.312057, 1994.312057, 0.000000, X, Y) && !ellipse(11218.998000, 23395.660000, 1335.184038, 1335.184038, 0.000000, X, Y) && !ellipse(11801.923248, 22651.490723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11710.908844, 26057.776489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11606.268829, 21555.320724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11638.693375, 20972.715698, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21.gif
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Sat May 11 07:59:14 2013] Mean detx,y = (-8775.05, -8177.92) 
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Sat May 11 07:59:14 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat May 11 07:59:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Sat May 11 11:29:24 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:24 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 16736.00
[Sat May 11 11:29:24 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 11615.00
[Sat May 11 11:29:24 2013] Got source and background scale factors 5222692.000000, 6806158.000000
[Sat May 11 11:29:24 2013] User source parameters:
  Position = (189.6, 260.7) = 20 56 7.86 31 42 42.7
  Extent = 21.6 (21.6-43.2)", rotation angle = 0
  Source aperture counts = 7823.3 +/- 130.4
  Background aperture counts = 8912.7
  Rate = 0.5 +/- 0.009

[Sat May 11 11:29:37 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:37 2013] Using photon index=1.80, rate=0.0525, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21.arf
[Sat May 11 11:29:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:37 2013] Updating source flux to 1.1e-12
[Sat May 11 11:29:58 2013] Flag b found in src. 21 procflags, skipping spectral fitting
[Sat May 11 11:29:58 2013] Flag c found in src. 21 procflags, skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete