[Sat May 11 07:54:06 2013] Detection parameters:
  Position = (127.2, 274.9) = 20 56 29.14 31 43 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.7 +/- 25.5
  Background counts = 191.3
  Rate = 0.01 +/- 0.002

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 12.53'
[Sat May 11 07:55:16 2013] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 12.69"
[Sat May 11 07:55:16 2013] source mask rpix=2.9, npix_max = 46, mask sum = 43, frac = 0.920
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 12.69"
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src61.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src61.csv
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src61.csv
[Sat May 11 07:55:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat May 11 07:55:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat May 11 07:55:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sat May 11 07:55:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:08 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.106617 pixels away
[Sat May 11 07:56:08 2013] Warning, spatial fit 61 centroid is now closest to src. 17
[Sat May 11 07:56:08 2013] Spatial fit model total counts = 3973.860000, observed total counts = 3715.000000
[Sat May 11 07:56:08 2013] Offset between fit and detection position for source 18 = 5.900947 pixels
[Sat May 11 07:56:08 2013] Warning, changing simple spatial fit ID from 61 to 62
[Sat May 11 07:56:08 2013] 3772.652000 total counts/ 3497.710000 bgd. counts: snr = 4.648889
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 5.900947 pixels
  Position = (129.5, 269.5) = 20 56 28.34 31 43 20.3
  Extent = 16.7 (9.0-24.9)", rotation angle = 0
  Source counts = 274.9 +/- 61.4
  Background counts = 3497.7
  Rate = 0.02 +/- 0.004
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:08 2013] Source is confused with source 6
[Sat May 11 07:56:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 16.69"
[Sat May 11 07:56:58 2013] source mask rpix=3.8, npix_max = 75, mask sum = 73, frac = 0.970
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 16.69"
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src52.ximg exists
[Sat May 11 07:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src52.csv
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat May 11 07:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src52.csv
[Sat May 11 07:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:01 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat May 11 07:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat May 11 07:57:01 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat May 11 07:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat May 11 07:57:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:41 2013] Source 18 is offset by 3.990644 and 3.993931 pixels which is larger than
2 X fitted extent = 3.264809 x 3.264809, not incorporating fit results
[Sat May 11 07:57:41 2013] Warning, spatial fit 52 centroid is now closest to src. 22
[Sat May 11 07:57:42 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:42 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:57:42 2013] Source does appear to be extended
[Sat May 11 07:57:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:59:13 2013] XMMSAS src. selection expression = ellipse(11218.998000, 23395.660000, 1001.388029, 1001.388029, 0.000000, X, Y)
[Sat May 11 07:59:13 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_src.reg
[Sat May 11 07:59:13 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (72, 212) - (187, 327)
[Sat May 11 07:59:13 2013] XMMSAS bgd. selection expression = annulus(11218.998000, 23395.660000, 1668.980048, 3337.960096, X, Y) && !ellipse(11371.629288, 22748.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15614.320000, 22159.792000, 3415.952098, 3415.952098, 0.000000, X, Y) && !ellipse(11619.348831, 21941.703156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12269.087400, 21659.500000, 1346.688039, 1346.688039, 0.000000, X, Y) && !ellipse(15121.995000, 27937.698400, 1475.936042, 1475.936042, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y) && !ellipse(11237.266000, 25586.888000, 1975.592057, 1975.592057, 0.000000, X, Y) && !ellipse(12449.775620, 21913.654099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15389.838000, 21836.378000, 1637.768047, 1637.768047, 0.000000, X, Y) && !ellipse(12168.376000, 21843.536000, 1994.312057, 1994.312057, 0.000000, X, Y) && !ellipse(11801.923248, 22651.490723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11710.908844, 26057.776489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11606.268829, 21555.320724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11638.693375, 20972.715698, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 07:59:13 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18.gif
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sat May 11 07:59:16 2013] Mean detx,y = (-10452.61, -12898.46) 
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sat May 11 07:59:16 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May 11 07:59:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat May 11 07:59:16 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sat May 11 11:29:34 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:34 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 3484.00
[Sat May 11 11:29:34 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 1497.00
[Sat May 11 11:29:34 2013] Got source and background scale factors 2101158.000000, 631741.000000
[Sat May 11 11:29:34 2013] User source parameters:
  Position = (129.5, 269.5) = 20 56 28.34 31 43 20.3
  Extent = 16.7 (9.0-24.9)", rotation angle = 0
  Source aperture counts = -1495.0 +/- 60.0
  Background aperture counts = 4979.0
  Rate = -0.1 +/- 0.004

[Sat May 11 11:29:39 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:39 2013] Using photon index=1.80, rate=0.0188, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18.arf
[Sat May 11 11:29:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:39 2013] Updating source flux to 7.7e-13
[Sat May 11 11:29:58 2013] Flag b found in src. 18 procflags, skipping spectral fitting
[Sat May 11 11:29:58 2013] Flag c found in src. 18 procflags, skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete