[Sat May 11 07:54:06 2013] Detection parameters:
  Position = (214.5, 247.8) = 20 55 59.35 31 41 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.0 +/- 36.4
  Background counts = 348.3
  Rate = 0.01 +/- 0.002

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 7.10'
[Sat May 11 07:55:16 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Sat May 11 07:55:16 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.928
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.98"
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src33.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src33.csv
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src33.csv
[Sat May 11 07:55:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat May 11 07:55:19 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat May 11 07:56:07 2013] Spatial fit model total counts = 4401.040000, observed total counts = 4173.000000
[Sat May 11 07:56:07 2013] Offset between fit and detection position for source 16 = 8.298570 pixels
[Sat May 11 07:56:07 2013] 4335.024000 total counts/ 3831.000000 bgd. counts: snr = 8.143201
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 8.298570 pixels
  Position = (222.8, 246.8) = 20 55 56.54 31 41 42.3
  Extent = 19.9 (19.9-20.0)", rotation angle = 0
  Source counts = 504.0 +/- 65.8
  Background counts = 3831.0
  Rate = 0.03 +/- 0.005
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:08 2013] Source is confused with source 7
[Sat May 11 07:56:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 19.95"
[Sat May 11 07:56:58 2013] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.967
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 19.95"
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src27.ximg exists
[Sat May 11 07:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src27.csv
[Sat May 11 07:56:59 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat May 11 07:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src27.csv
[Sat May 11 07:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat May 11 07:57:00 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sat May 11 07:57:41 2013] Warning, spatial fit 27 centroid is now closest to src. 7
[Sat May 11 07:57:41 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:41 2013] Assessing source extent using major axis lower bound
[Sat May 11 07:57:41 2013] Source does appear to be extended
[Sat May 11 07:57:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:59:12 2013] XMMSAS src. selection expression = ellipse(19333.038000, 21422.369600, 1196.826034, 1196.826034, 0.000000, X, Y)
[Sat May 11 07:59:12 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_src.reg
[Sat May 11 07:59:12 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (154, 178) - (292, 316)
[Sat May 11 07:59:12 2013] XMMSAS bgd. selection expression = annulus(19333.038000, 21422.369600, 1994.710057, 3989.420115, X, Y) && !ellipse(19186.503586, 23068.330322, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18746.870560, 22162.117050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16445.728000, 22633.682000, 1728.992050, 1728.992050, 0.000000, X, Y) && !ellipse(16781.900000, 22803.560000, 1707.976049, 1707.976049, 0.000000, X, Y) && !ellipse(24386.180000, 25137.553000, 1110.048032, 1110.048032, 0.000000, X, Y) && !ellipse(20536.393494, 26072.618103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15614.320000, 22159.792000, 3415.952098, 3415.952098, 0.000000, X, Y) && !ellipse(23580.714000, 24783.832560, 2405.536069, 2405.536069, 0.000000, X, Y) && !ellipse(17751.636810, 21846.481857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17909.865936, 21265.240189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y) && !ellipse(16754.241867, 22145.244339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15389.838000, 21836.378000, 1637.768047, 1637.768047, 0.000000, X, Y)
[Sat May 11 07:59:12 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16.gif
[Sat May 11 07:59:15 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Sat May 11 07:59:15 2013] Mean detx,y = (-8399.27, -5110.71) 
[Sat May 11 07:59:15 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Sat May 11 07:59:15 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Sat May 11 07:59:15 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat May 11 07:59:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat May 11 07:59:15 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Sat May 11 11:29:28 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:28 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 9105.00
[Sat May 11 11:29:28 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_bgd.pi.gz = 24140.00
[Sat May 11 11:29:28 2013] Got source and background scale factors 4357132.000000, 17813032.000000
[Sat May 11 11:29:28 2013] User source parameters:
  Position = (222.8, 246.8) = 20 55 56.54 31 41 42.3
  Extent = 19.9 (19.9-20.0)", rotation angle = 0
  Source aperture counts = 3200.3 +/- 96.4
  Background aperture counts = 5904.7
  Rate = 0.2 +/- 0.007

[Sat May 11 11:29:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:38 2013] Using photon index=1.80, rate=0.0345, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16.arf
[Sat May 11 11:29:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:38 2013] Updating source flux to 6.2e-13
[Sat May 11 11:29:58 2013] Flag c found in src. 16 procflags, skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete