[Sat May 11 07:54:06 2013] Detection parameters:
  Position = (134.0, 248.3) = 20 56 26.81 31 41 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.1 +/- 28.8
  Background counts = 269.7
  Rate = 0.009 +/- 0.002

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 12.47'
[Sat May 11 07:55:16 2013] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 12.66"
[Sat May 11 07:55:16 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.838
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 12.66"
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src68.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src68.csv
[Sat May 11 07:55:18 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src68_1.ximg exists
[Sat May 11 07:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src68.csv
[Sat May 11 07:55:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Sat May 11 07:55:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Sat May 11 07:55:20 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Sat May 11 07:55:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Sat May 11 07:55:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:56:08 2013] Warning, spatial fit 68 centroid is now closest to src. 6
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:08 2013] Source is confused with source 9
[Sat May 11 07:56:58 2013] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 12.66"
[Sat May 11 07:56:58 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.838
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 12.66"
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src59.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src59.csv
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat May 11 07:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src59.csv
[Sat May 11 07:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:01 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat May 11 07:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat May 11 07:57:01 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat May 11 07:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat May 11 07:57:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:41 2013] Warning, spatial fit 59 centroid is now closest to src. 22
[Sat May 11 07:57:42 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:42 2013] Assessing source extent using major
[Sat May 11 07:57:42 2013] Source does appear to be extended
[Sat May 11 07:57:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:59:13 2013] XMMSAS src. selection expression = ellipse(11606.268829, 21555.320724, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 07:59:13 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src15_src.reg
[Sat May 11 07:59:13 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (96, 211) - (171, 286)
[Sat May 11 07:59:13 2013] XMMSAS bgd. selection expression = annulus(11606.268829, 21555.320724, 1087.500000, 2175.000000, X, Y) && !ellipse(11371.629288, 22748.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15614.320000, 22159.792000, 3415.952098, 3415.952098, 0.000000, X, Y) && !ellipse(11619.348831, 21941.703156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12269.087400, 21659.500000, 1346.688039, 1346.688039, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y) && !ellipse(11237.266000, 25586.888000, 1975.592057, 1975.592057, 0.000000, X, Y) && !ellipse(12449.775620, 21913.654099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15389.838000, 21836.378000, 1637.768047, 1637.768047, 0.000000, X, Y) && !ellipse(12168.376000, 21843.536000, 1994.312057, 1994.312057, 0.000000, X, Y) && !ellipse(11218.998000, 23395.660000, 1335.184038, 1335.184038, 0.000000, X, Y) && !ellipse(11801.923248, 22651.490723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11638.693375, 20972.715698, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 07:59:13 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src15.gif
[Sat May 11 08:10:07 2013] Mean detx,y = (-11909.07, -11782.68) 
[Sat May 11 08:10:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 08:10:23 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 08:10:23 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat May 11 08:10:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat May 11 11:04:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 11:04:02 2013] rmf not generated due to insufficient counts
[Sat May 11 11:29:35 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:35 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 1974.00
[Sat May 11 11:29:35 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 103.00
[Sat May 11 11:29:35 2013] Got source and background scale factors 944448.000000, 84362.000000
[Sat May 11 11:29:35 2013] User source parameters:
  Position = (134.0, 248.3) = 20 56 26.81 31 41 41.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 820.9 +/- 45.4
  Background aperture counts = 1153.1
  Rate = 0.06 +/- 0.003

[Sat May 11 11:29:35 2013] Updating counts from extracted products
[Sat May 11 11:29:35 2013] Set source signif. to 820.90/33.96 = 24.17
[Sat May 11 11:29:39 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:39 2013] Using photon index=1.80, rate=0.0563, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src15.arf
[Sat May 11 11:29:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:39 2013] Updating source flux to 2.7e-12
[Sat May 11 11:29:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete