[Sat May 11 07:54:06 2013] Detection parameters:
  Position = (330.5, 402.2) = 20 55 19.81 31 52 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1750.9 +/- 345.0
  Background counts = 323.2
  Rate = 0.2 +/- 0.04

[Sat May 11 07:54:10 2013] Off-axis axis estimate = 7.87'
[Sat May 11 07:55:16 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:55:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 07:55:16 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Sat May 11 07:55:16 2013] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.722
[Sat May 11 07:55:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.36"
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src1.csv
[Sat May 11 07:55:17 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 11 07:55:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src1.csv
[Sat May 11 07:55:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 11 07:55:19 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 11 07:55:19 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 11 07:56:07 2013] Warning, spatial fit 1 centroid is now closest to src. 64
[Sat May 11 07:56:07 2013] Source 11 is offset by 3.832591 and -0.147894 pixels which is larger than
2 X fitted extent = 1.159485 x 9.275908, not incorporating fit results
[Sat May 11 07:56:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:56:08 2013] Assessing source extent using major
[Sat May 11 07:56:08 2013] Source does appear to be extended
[Sat May 11 07:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:56:08 2013] Source is confused with source 51
[Sat May 11 07:56:58 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sat May 11 07:56:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 07:56:58 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Sat May 11 07:56:58 2013] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.722
[Sat May 11 07:56:58 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.36"
[Sat May 11 07:56:58 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 11 07:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src1.csv
[Sat May 11 07:56:58 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 11 07:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src1.csv
[Sat May 11 07:56:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 11 07:57:00 2013] fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 11 07:57:00 2013] Fit fullrun_mos1_xmm0082540101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 11 07:57:41 2013] Warning, spatial fit 1 centroid is now closest to src. 63
[Sat May 11 07:57:41 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:57:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:57:41 2013] Assessing source extent using major
[Sat May 11 07:57:41 2013] Source does appear to be extended
[Sat May 11 07:57:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:59:11 2013] Counts = 1750.911499, rescaling region sizes by 2.000000
[Sat May 11 07:59:11 2013] XMMSAS src. selection expression = ellipse(28702.095398, 34941.807190, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Not overwriting source region fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_src.reg
[Sat May 11 07:59:11 2013] Extracting stamp from image fullrun_mos1_xmm0082540101_pi300-10000_cl_sm2.00.img.gz, (255, 327) - (405, 477)
[Sat May 11 07:59:11 2013] XMMSAS bgd. selection expression = annulus(28702.095398, 34941.807190, 4350.000000, 8700.000000, X, Y) && !ellipse(27112.019592, 34674.405914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26118.879180, 26577.840800, 521.772015, 521.772015, 0.000000, X, Y) && !ellipse(33380.795990, 26686.362640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22463.026123, 29715.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29472.333200, 34681.920000, 1617.920047, 410.312012, 90.000000, X, Y) && !ellipse(26129.158000, 32803.338000, 3013.472087, 3013.472087, 0.000000, X, Y) && !ellipse(28087.206543, 34424.238434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21385.016525, 27823.644440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24386.180000, 25137.553000, 1110.048032, 1110.048032, 0.000000, X, Y) && !ellipse(26642.004000, 33253.160000, 3013.888087, 3013.888087, 0.000000, X, Y) && !ellipse(22462.949127, 28650.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32942.140015, 26894.463837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20536.393494, 26072.618103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.066000, 33371.452000, 1506.736043, 1506.736043, 0.000000, X, Y) && !ellipse(19418.449400, 27017.382200, 1466.232042, 766.836022, 92.266070, X, Y) && !ellipse(31332.198200, 27383.913600, 1121.024032, 1121.024032, 0.000000, X, Y) && !ellipse(32552.486000, 34989.864000, 1752.312050, 1752.312050, 0.000000, X, Y) && !ellipse(23580.714000, 24783.832560, 2405.536069, 2405.536069, 0.000000, X, Y) && !ellipse(29841.413000, 42410.781200, 1246.272036, 327.709609, 0.452523, X, Y) && !ellipse(29460.120000, 34050.111120, 1629.464047, 1629.464047, 0.000000, X, Y) && !ellipse(27215.771800, 33534.641244, 1536.448044, 1536.448044, 0.000000, X, Y) && !ellipse(16956.944000, 23037.996000, 3457.984100, 3457.984100, 0.000000, X, Y) && !ellipse(27375.158000, 24890.794300, 2255.888065, 2255.888065, 0.000000, X, Y) && !ellipse(30053.790000, 42862.758600, 2205.824063, 2205.824063, 0.000000, X, Y) && !ellipse(22446.087036, 39153.737701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37133.074400, 39938.566200, 3297.040095, 3297.040095, 0.000000, X, Y) && !ellipse(21816.400000, 38597.600000, 1940.928056, 1940.928056, 0.000000, X, Y) && !ellipse(36252.418000, 39237.048000, 2186.416063, 2186.416063, 0.000000, X, Y) && !ellipse(19045.020000, 39611.030000, 3633.200105, 1395.000040, 332.909000, X, Y) && !ellipse(18856.314000, 39566.022600, 1841.984053, 1841.984053, 0.000000, X, Y)
[Sat May 11 07:59:11 2013] Writing fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11.gif
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0082540101/products/events/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sat May 11 07:59:14 2013] Mean detx,y = (7824.23, -3207.76) 
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_src.img and ../../xmm0082540101/products/images/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0082540101/products/spectra/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sat May 11 07:59:14 2013] Setting source spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat May 11 07:59:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat May 11 07:59:14 2013] ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0082540101/products/lightcurves/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sat May 11 08:24:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 08:24:09 2013] rmf not generated due to insufficient counts
[Sat May 11 11:29:22 2013] Updating aperture counts using extracted products
[Sat May 11 11:29:22 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 10140.00
[Sat May 11 11:29:22 2013] Total counts from fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 226557.00
[Sat May 11 11:29:22 2013] Got source and background scale factors 4760475.000000, 119258935.000000
[Sat May 11 11:29:22 2013] User source parameters:
  Position = (330.5, 402.2) = 20 55 19.81 31 52 48.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1096.5 +/- 101.7
  Background aperture counts = 9043.5
  Rate = 0.08 +/- 0.007

[Sat May 11 11:29:22 2013] Updating counts from extracted products
[Sat May 11 11:29:22 2013] Set source signif. to 1096.49/95.10 = 11.53
[Sat May 11 11:29:37 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:29:37 2013] Using photon index=1.80, rate=0.0752, arf fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11.arf
[Sat May 11 11:29:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 11:29:37 2013] Updating source flux to 1.2e-12
[Sat May 11 11:29:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:30:38 2013] xmm0082540101/analysis//spectral/fullrun_mos1_xmm0082540101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete