[Sat Jun  8 09:54:30 2013] Detection parameters:
  Position = (402.0, 464.1) = 11 17 45.99 7 59 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.3 +/- 21.7
  Background counts = 64.3
  Rate = 0.004 +/- 0.0004

[Sat Jun  8 09:54:30 2013] Off-axis axis estimate = 14.17'
[Sat Jun  8 09:55:04 2013] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:04 2013] Initial guess for spatial extent in simple fitting = 13.51"
[Sat Jun  8 09:55:04 2013] source mask rpix=3.1, npix_max = 52, mask sum = 55, frac = 1.057
[Sat Jun  8 09:55:04 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 13.51"
[Sat Jun  8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src70.ximg exists
[Sat Jun  8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src70.csv
[Sat Jun  8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src70_1.ximg exists
[Sat Jun  8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src70.csv
[Sat Jun  8 09:55:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sat Jun  8 09:55:06 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src70.csv
[Sat Jun  8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sat Jun  8 09:55:06 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src70.csv
[Sat Jun  8 09:55:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:24 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 17.238077 pixels away
[Sat Jun  8 09:55:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:55:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:55:24 2013] Assessing source extent using major
[Sat Jun  8 09:55:24 2013] Source does appear to be extended
[Sat Jun  8 09:55:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:55:56 2013] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:56 2013] Initial guess for spatial extent in simple fitting = 13.51"
[Sat Jun  8 09:55:56 2013] source mask rpix=3.1, npix_max = 52, mask sum = 55, frac = 1.057
[Sat Jun  8 09:55:56 2013] Giving source the simple spatial ID 67 for pass 1, mean size = 13.51"
[Sat Jun  8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src67.ximg exists
[Sat Jun  8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src67.csv
[Sat Jun  8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src67_1.ximg exists
[Sat Jun  8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src67.csv
[Sat Jun  8 09:55:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sat Jun  8 09:55:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sat Jun  8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sat Jun  8 09:55:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sat Jun  8 09:55:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:56:14 2013] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 16.170247 pixels away
[Sat Jun  8 09:56:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:56:14 2013] Assessing source extent using major
[Sat Jun  8 09:56:14 2013] Source does appear to be extended
[Sat Jun  8 09:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:56:44 2013] XMMSAS src. selection expression = ellipse(34921.785614, 40332.252106, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 09:56:44 2013] Not overwriting source region fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_src.reg
[Sat Jun  8 09:56:44 2013] Extracting stamp from image fullrun_pn_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (364, 427) - (439, 502)
[Sat Jun  8 09:56:44 2013] XMMSAS bgd. selection expression = annulus(34921.785614, 40332.252106, 1087.500000, 2175.000000, X, Y) && !ellipse(33489.992035, 37345.171570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34398.166046, 37660.387268, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 09:56:44 2013] Writing fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74.gif
[Sat Jun  8 09:57:02 2013] ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_src.evt and ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_bgd.evt exist, delete to re-create
[Sat Jun  8 09:57:03 2013] Mean detx,y = (-15366.78, 10482.81) 
[Sat Jun  8 09:57:03 2013] ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_src.img and ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_bgd.img exist, delete to re-create
[Sat Jun  8 09:57:03 2013] ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_bgd.pi exist, delete to re-create
[Sat Jun  8 09:57:03 2013] Setting source spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sat Jun  8 09:57:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Sat Jun  8 09:57:03 2013] ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_bgd.lc exist, delete to re-create
[Sat Jun  8 09:57:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 09:57:10 2013] rmf not generated due to insufficient counts
[Sat Jun  8 09:57:10 2013] fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74.arf exists, delete to re-create
[Sat Jun  8 10:47:08 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:47:09 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_src_b10.pi.gz = 496.00
[Sat Jun  8 10:47:09 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_bgd.pi.gz = 1715.00
[Sat Jun  8 10:47:09 2013] Got source and background scale factors 943980.000000, 5696382.000000
[Sat Jun  8 10:47:09 2013] User source parameters:
  Position = (402.0, 464.1) = 11 17 45.99 7 59 43.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 211.8 +/- 23.3
  Background aperture counts = 284.2
  Rate = 0.004 +/- 0.0004

[Sat Jun  8 10:47:09 2013] Updating counts from extracted products
[Sat Jun  8 10:47:09 2013] Set source signif. to 211.80/16.86 = 12.56
[Sat Jun  8 10:47:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:47:11 2013] Using photon index=1.80, rate=0.00366, arf fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74.arf
[Sat Jun  8 10:47:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:47:11 2013] Updating source flux to 4e-14
[Sat Jun  8 10:47:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 10:47:55 2013] xmm0082340101/analysis//spectral/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src74_pl.csv not found, spectral fit skipped or did not complete