[Sat Jun  8 09:54:30 2013] Detection parameters:
  Position = (446.9, 217.5) = 11 17 32.85 7 41 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.3 +/- 18.6
  Background counts = 77.7
  Rate = 0.002 +/- 0.0003

[Sat Jun  8 09:54:30 2013] Off-axis axis estimate = 12.26'
[Sat Jun  8 09:55:04 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:04 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Jun  8 09:55:04 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Sat Jun  8 09:55:04 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 12.56"
[Sat Jun  8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src60.ximg exists
[Sat Jun  8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src60.csv
[Sat Jun  8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src60_1.ximg exists
[Sat Jun  8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src60.csv
[Sat Jun  8 09:55:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sat Jun  8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sat Jun  8 09:55:06 2013] Fit fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Sat Jun  8 09:55:24 2013] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 12.617613 pixels away
[Sat Jun  8 09:55:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:55:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:55:24 2013] Assessing source extent using major
[Sat Jun  8 09:55:24 2013] Source does appear to be extended
[Sat Jun  8 09:55:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:55:56 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 09:55:56 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Jun  8 09:55:56 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Sat Jun  8 09:55:56 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 12.56"
[Sat Jun  8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src57.ximg exists
[Sat Jun  8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src57.csv
[Sat Jun  8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src57_1.ximg exists
[Sat Jun  8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src57.csv
[Sat Jun  8 09:55:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Sat Jun  8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Sat Jun  8 09:55:58 2013] Fit fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Sat Jun  8 09:56:14 2013] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 12.620468 pixels away
[Sat Jun  8 09:56:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 09:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 09:56:14 2013] Assessing source extent using major
[Sat Jun  8 09:56:14 2013] Source does appear to be extended
[Sat Jun  8 09:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:56:44 2013] XMMSAS src. selection expression = ellipse(38834.494324, 18875.849228, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 09:56:44 2013] Not overwriting source region fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_src.reg
[Sat Jun  8 09:56:44 2013] Extracting stamp from image fullrun_pn_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (409, 180) - (484, 255)
[Sat Jun  8 09:56:44 2013] XMMSAS bgd. selection expression = annulus(38834.494324, 18875.849228, 1087.500000, 2175.000000, X, Y) && !ellipse(38230.901400, 20995.469400, 496.492014, 496.492014, 0.000000, X, Y) && !ellipse(36706.315765, 21713.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40349.191193, 20797.781128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40914.672607, 20998.834549, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 09:56:44 2013] Writing fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64.gif
[Sat Jun  8 09:57:00 2013] ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_src.evt and ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_bgd.evt exist, delete to re-create
[Sat Jun  8 09:57:01 2013] Mean detx,y = (-9612.87, -10490.15) 
[Sat Jun  8 09:57:01 2013] ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_src.img and ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_bgd.img exist, delete to re-create
[Sat Jun  8 09:57:01 2013] ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_bgd.pi exist, delete to re-create
[Sat Jun  8 09:57:01 2013] Setting source spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Sat Jun  8 09:57:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Sat Jun  8 09:57:01 2013] ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_bgd.lc exist, delete to re-create
[Sat Jun  8 09:57:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 09:57:10 2013] rmf not generated due to insufficient counts
[Sat Jun  8 09:57:10 2013] fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64.arf exists, delete to re-create
[Sat Jun  8 10:47:06 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:47:06 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_src_b10.pi.gz = 549.00
[Sat Jun  8 10:47:06 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_bgd.pi.gz = 3120.00
[Sat Jun  8 10:47:06 2013] Got source and background scale factors 1329600.000000, 8301216.000000
[Sat Jun  8 10:47:06 2013] User source parameters:
  Position = (446.9, 217.5) = 11 17 32.85 7 41 49.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 49.3 +/- 24.4
  Background aperture counts = 499.7
  Rate = 0.0009 +/- 0.0004

[Sat Jun  8 10:47:06 2013] Updating counts from extracted products
[Sat Jun  8 10:47:06 2013] Set source signif. to 49.27/22.35 = 2.20
[Sat Jun  8 10:47:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:47:10 2013] Using photon index=1.80, rate=0.000852, arf fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64.arf
[Sat Jun  8 10:47:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:47:10 2013] Updating source flux to 6.3e-15
[Sat Jun  8 10:47:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 10:47:55 2013] xmm0082340101/analysis//spectral/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src64_pl.csv not found, spectral fit skipped or did not complete