[Sat Jun 8 09:54:30 2013] Detection parameters: Position = (358.6, 236.2) = 11 17 58.70 7 43 9.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 152.5 +/- 19.4 Background counts = 91.4 Rate = 0.004 +/- 0.0005 [Sat Jun 8 09:54:30 2013] Off-axis axis estimate = 6.28' [Sat Jun 8 09:55:04 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:04 2013] Initial guess for spatial extent in simple fitting = 9.57" [Sat Jun 8 09:55:04 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.961 [Sat Jun 8 09:55:04 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 9.57" [Sat Jun 8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src54.ximg exists [Sat Jun 8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src54.csv [Sat Jun 8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src54_1.ximg exists [Sat Jun 8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src54.csv [Sat Jun 8 09:55:05 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists [Sat Jun 8 09:55:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src54.csv [Sat Jun 8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists [Sat Jun 8 09:55:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src54.csv [Sat Jun 8 09:55:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:24 2013] Spatial fit model total counts = 894.941000, observed total counts = 758.000000 [Sat Jun 8 09:55:24 2013] Poor agreement between spatial fit and data for source 58 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 8 09:55:24 2013] Source 58 is offset by -7.865721 and 3.665755 pixels which is larger than 2 X fitted extent = 1.190377 x 1.190377, not incorporating fit results [Sat Jun 8 09:55:24 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:55:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:55:24 2013] Assessing source extent using major [Sat Jun 8 09:55:24 2013] Source does appear to be extended [Sat Jun 8 09:55:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:55:56 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:56 2013] Initial guess for spatial extent in simple fitting = 9.57" [Sat Jun 8 09:55:56 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.961 [Sat Jun 8 09:55:56 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 9.57" [Sat Jun 8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src51.ximg exists [Sat Jun 8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src51.csv [Sat Jun 8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src51_1.ximg exists [Sat Jun 8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src51.csv [Sat Jun 8 09:55:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists [Sat Jun 8 09:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src51.csv [Sat Jun 8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists [Sat Jun 8 09:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src51.csv [Sat Jun 8 09:55:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:56:14 2013] Source 58 is offset by -9.185997 and -3.723624 pixels which is larger than 2 X fitted extent = 1.099660 x 1.099660, not incorporating fit results [Sat Jun 8 09:56:14 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:56:14 2013] Assessing source extent using major [Sat Jun 8 09:56:14 2013] Source does appear to be extended [Sat Jun 8 09:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:56:44 2013] XMMSAS src. selection expression = ellipse(31150.680237, 20499.922684, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 09:56:44 2013] Not overwriting source region fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_src.reg [Sat Jun 8 09:56:44 2013] Extracting stamp from image fullrun_pn_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (321, 199) - (396, 274) [Sat Jun 8 09:56:44 2013] XMMSAS bgd. selection expression = annulus(31150.680237, 20499.922684, 1087.500000, 2175.000000, X, Y) && !ellipse(30983.935032, 21654.076732, 535.374454, 383.117597, 101.230775, X, Y) && !ellipse(34104.118896, 19634.948654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32671.732920, 19347.427940, 645.926419, 645.926419, 0.000000, X, Y) [Sat Jun 8 09:56:44 2013] Writing fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58.gif [Sat Jun 8 09:56:59 2013] ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_src.evt and ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_bgd.evt exist, delete to re-create [Sat Jun 8 09:56:59 2013] Mean detx,y = (-3493.75, -5663.66) [Sat Jun 8 09:56:59 2013] ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_src.img and ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_bgd.img exist, delete to re-create [Sat Jun 8 09:56:59 2013] ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_bgd.pi exist, delete to re-create [Sat Jun 8 09:56:59 2013] Setting source spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_src_b10.pi.gz [Sat Jun 8 09:56:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_bgd.pi.gz [Sat Jun 8 09:56:59 2013] ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_bgd.lc exist, delete to re-create [Sat Jun 8 09:57:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 09:57:10 2013] rmf not generated due to insufficient counts [Sat Jun 8 09:57:10 2013] fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58.arf exists, delete to re-create [Sat Jun 8 10:47:04 2013] Updating aperture counts using extracted products [Sat Jun 8 10:47:04 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 570.00 [Sat Jun 8 10:47:04 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_bgd.pi.gz = 2930.00 [Sat Jun 8 10:47:04 2013] Got source and background scale factors 1111456.000000, 7469757.000000 [Sat Jun 8 10:47:04 2013] User source parameters: Position = (358.6, 236.2) = 11 17 58.70 7 43 9.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 134.0 +/- 24.9 Background aperture counts = 436.0 Rate = 0.002 +/- 0.0004 [Sat Jun 8 10:47:04 2013] Updating counts from extracted products [Sat Jun 8 10:47:04 2013] Set source signif. to 134.03/20.88 = 6.42 [Sat Jun 8 10:47:10 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:47:10 2013] Using photon index=1.80, rate=0.00232, arf fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58.arf [Sat Jun 8 10:47:10 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:47:10 2013] Updating source flux to 9.5e-15 [Sat Jun 8 10:47:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 10:47:55 2013] xmm0082340101/analysis//spectral/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete