[Sat Jun 8 09:54:29 2013] Detection parameters: Position = (353.0, 339.8) = 11 18 0.32 7 50 41.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 174.0 +/- 21.1 Background counts = 89.3 Rate = 0.005 +/- 0.0006 [Sat Jun 8 09:54:30 2013] Off-axis axis estimate = 4.97' [Sat Jun 8 09:55:04 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:04 2013] Initial guess for spatial extent in simple fitting = 8.91" [Sat Jun 8 09:55:04 2013] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.154 [Sat Jun 8 09:55:04 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 8.91" [Sat Jun 8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src29.ximg exists [Sat Jun 8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src29.csv [Sat Jun 8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src29_1.ximg exists [Sat Jun 8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src29.csv [Sat Jun 8 09:55:05 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Sat Jun 8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Sat Jun 8 09:55:06 2013] Fit fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Sat Jun 8 09:55:24 2013] Spatial fit model total counts = 1031.250000, observed total counts = 963.000000 [Sat Jun 8 09:55:24 2013] Offset between fit and detection position for source 30 = 0.166132 pixels [Sat Jun 8 09:55:24 2013] 1030.540000 total counts/ 922.114000 bgd. counts: snr = 3.570599 Spatial fit parameters: Offset between fit and detection position for source 30 = 0.166132 pixels Position = (352.9, 340.0) = 11 18 0.36 7 50 41.6 Extent = 5.6 (4.1-7.2)", rotation angle = 0 Source counts = 108.4 +/- 32.1 Background counts = 922.1 Rate = 0.002 +/- 0.0006 [Sat Jun 8 09:55:24 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:55:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:55:24 2013] Assessing source extent using major axis lower bound [Sat Jun 8 09:55:24 2013] Source does appear to be extended [Sat Jun 8 09:55:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:55:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:56 2013] Initial guess for spatial extent in simple fitting = 5.62" [Sat Jun 8 09:55:56 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.247 [Sat Jun 8 09:55:56 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 5.62" [Sat Jun 8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src29.ximg exists [Sat Jun 8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src29.csv [Sat Jun 8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src29_1.ximg exists [Sat Jun 8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src29.csv [Sat Jun 8 09:55:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Sat Jun 8 09:55:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src29.csv [Sat Jun 8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Sat Jun 8 09:55:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src29.csv [Sat Jun 8 09:55:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:56:14 2013] Warning, spatial fit 29 centroid is now closest to src. 8 [Sat Jun 8 09:56:14 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:56:14 2013] Assessing source extent using major axis lower bound [Sat Jun 8 09:56:14 2013] Source does appear to be extended [Sat Jun 8 09:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:56:44 2013] XMMSAS src. selection expression = ellipse(30656.944040, 29528.262360, 336.957610, 336.957610, 0.000000, X, Y) [Sat Jun 8 09:56:44 2013] Not overwriting source region fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_src.reg [Sat Jun 8 09:56:44 2013] Extracting stamp from image fullrun_pn_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (334, 321) - (372, 359) [Sat Jun 8 09:56:44 2013] XMMSAS bgd. selection expression = annulus(30656.944040, 29528.262360, 561.596016, 1123.192032, X, Y) && !ellipse(29405.932800, 30373.868800, 411.654372, 411.654372, 0.000000, X, Y) [Sat Jun 8 09:56:44 2013] Writing fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30.gif [Sat Jun 8 09:56:54 2013] ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create [Sat Jun 8 09:56:54 2013] Mean detx,y = (-6899.46, 2659.87) [Sat Jun 8 09:56:54 2013] ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_src.img and ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create [Sat Jun 8 09:56:54 2013] ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create [Sat Jun 8 09:56:54 2013] Setting source spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Sat Jun 8 09:56:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_bgd.pi.gz [Sat Jun 8 09:56:54 2013] ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create [Sat Jun 8 09:57:10 2013] fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30.rmf exists, delete to re-create [Sat Jun 8 09:57:10 2013] fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30.arf exists, delete to re-create [Sat Jun 8 10:46:59 2013] Updating aperture counts using extracted products [Sat Jun 8 10:46:59 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 283.00 [Sat Jun 8 10:46:59 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_bgd.pi.gz = 1102.00 [Sat Jun 8 10:46:59 2013] Got source and background scale factors 360000.000000, 2658092.000000 [Sat Jun 8 10:46:59 2013] User source parameters: Position = (352.9, 340.0) = 11 18 0.36 7 50 41.6 Extent = 5.6 (4.1-7.2)", rotation angle = 0 Source aperture counts = 133.8 +/- 17.8 Background aperture counts = 149.2 Rate = 0.002 +/- 0.0003 [Sat Jun 8 10:47:10 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:47:10 2013] Using photon index=1.80, rate=0.00187, arf fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30.arf [Sat Jun 8 10:47:10 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:47:10 2013] Updating source flux to 8.7e-15 [Sat Jun 8 10:47:55 2013] xmm0082340101/analysis//spectral/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete