[Sat Jun 8 09:54:28 2013] Detection parameters: Position = (420.7, 375.8) = 11 17 40.52 7 53 16.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 138.0 +/- 19.9 Background counts = 82.0 Rate = 0.002 +/- 0.0003 [Sat Jun 8 09:54:30 2013] Off-axis axis estimate = 10.49' [Sat Jun 8 09:55:04 2013] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:04 2013] Initial guess for spatial extent in simple fitting = 11.67" [Sat Jun 8 09:55:04 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.036 [Sat Jun 8 09:55:04 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 11.67" [Sat Jun 8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src21.ximg exists [Sat Jun 8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src21.csv [Sat Jun 8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src21_1.ximg exists [Sat Jun 8 09:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src21.csv [Sat Jun 8 09:55:05 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src21_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists [Sat Jun 8 09:55:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src21.csv [Sat Jun 8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists [Sat Jun 8 09:55:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src21.csv [Sat Jun 8 09:55:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:24 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.663103 pixels away [Sat Jun 8 09:55:24 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:55:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:55:24 2013] Assessing source extent using major [Sat Jun 8 09:55:24 2013] Source does appear to be extended [Sat Jun 8 09:55:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:55:56 2013] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:56 2013] Initial guess for spatial extent in simple fitting = 11.67" [Sat Jun 8 09:55:56 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.036 [Sat Jun 8 09:55:56 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 11.67" [Sat Jun 8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src21.ximg exists [Sat Jun 8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src21.csv [Sat Jun 8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src21_1.ximg exists [Sat Jun 8 09:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src21.csv [Sat Jun 8 09:55:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src21_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists [Sat Jun 8 09:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src21.csv [Sat Jun 8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists [Sat Jun 8 09:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src21.csv [Sat Jun 8 09:55:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:56:14 2013] Spatial fit model total counts = 782.141000, observed total counts = 685.000000 [Sat Jun 8 09:56:14 2013] Poor agreement between spatial fit and data for source 22 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 8 09:56:14 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:56:14 2013] Assessing source extent using major [Sat Jun 8 09:56:14 2013] Source does appear to be extended [Sat Jun 8 09:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:56:43 2013] XMMSAS src. selection expression = ellipse(36550.093842, 32648.570770, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 09:56:43 2013] Not overwriting source region fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_src.reg [Sat Jun 8 09:56:43 2013] Extracting stamp from image fullrun_pn_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (383, 338) - (458, 413) [Sat Jun 8 09:56:43 2013] XMMSAS bgd. selection expression = annulus(36550.093842, 32648.570770, 1087.500000, 2175.000000, X, Y) && !ellipse(34554.082642, 33522.513489, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 09:56:43 2013] Writing fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22.gif [Sat Jun 8 09:56:51 2013] ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create [Sat Jun 8 09:56:51 2013] Mean detx,y = (-13582.90, 2899.95) [Sat Jun 8 09:56:51 2013] ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_src.img and ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create [Sat Jun 8 09:56:51 2013] ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create [Sat Jun 8 09:56:51 2013] Setting source spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_src_b10.pi.gz [Sat Jun 8 09:56:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_bgd.pi.gz [Sat Jun 8 09:56:51 2013] ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create [Sat Jun 8 09:57:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 09:57:10 2013] rmf not generated due to insufficient counts [Sat Jun 8 09:57:10 2013] fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22.arf exists, delete to re-create [Sat Jun 8 10:46:57 2013] Updating aperture counts using extracted products [Sat Jun 8 10:46:57 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 524.00 [Sat Jun 8 10:46:57 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 3519.00 [Sat Jun 8 10:46:57 2013] Got source and background scale factors 1202210.000000, 9674034.000000 [Sat Jun 8 10:46:57 2013] User source parameters: Position = (420.7, 375.8) = 11 17 40.52 7 53 16.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 86.7 +/- 23.9 Background aperture counts = 437.3 Rate = 0.001 +/- 0.0004 [Sat Jun 8 10:46:57 2013] Updating counts from extracted products [Sat Jun 8 10:46:57 2013] Set source signif. to 86.69/20.91 = 4.15 [Sat Jun 8 10:47:09 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:47:09 2013] Using photon index=1.80, rate=0.0015, arf fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22.arf [Sat Jun 8 10:47:09 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:47:09 2013] Updating source flux to 1.1e-14 [Sat Jun 8 10:47:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 10:47:55 2013] xmm0082340101/analysis//spectral/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete