[Sat Jun 8 09:54:28 2013] Detection parameters: Position = (467.3, 389.7) = 11 17 26.86 7 54 18.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 76.5 +/- 16.9 Background counts = 64.9 Rate = 0.001 +/- 0.0003 [Sat Jun 8 09:54:30 2013] Off-axis axis estimate = 13.92' [Sat Jun 8 09:55:04 2013] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:04 2013] Initial guess for spatial extent in simple fitting = 13.39" [Sat Jun 8 09:55:04 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.957 [Sat Jun 8 09:55:04 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 13.39" [Sat Jun 8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src19.ximg exists [Sat Jun 8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src19_1.ximg exists [Sat Jun 8 09:55:05 2013] Fit fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_src19 appears to have run properly [Sat Jun 8 09:55:05 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Sat Jun 8 09:55:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src19.csv [Sat Jun 8 09:55:06 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Sat Jun 8 09:55:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src19.csv [Sat Jun 8 09:55:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:24 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.563289 pixels away [Sat Jun 8 09:55:24 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:55:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:55:24 2013] Assessing source extent using major [Sat Jun 8 09:55:24 2013] Source does appear to be extended [Sat Jun 8 09:55:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:55:56 2013] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 09:55:56 2013] Initial guess for spatial extent in simple fitting = 13.39" [Sat Jun 8 09:55:56 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.957 [Sat Jun 8 09:55:56 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 13.39" [Sat Jun 8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src19.ximg exists [Sat Jun 8 09:55:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src19.csv [Sat Jun 8 09:55:57 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src19_1.ximg exists [Sat Jun 8 09:55:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src19.csv [Sat Jun 8 09:55:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Sat Jun 8 09:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src19.csv [Sat Jun 8 09:55:58 2013] fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Sat Jun 8 09:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src19.csv [Sat Jun 8 09:55:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0082340101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 09:56:14 2013] Source 20 is offset by 1.354093 and -9.014763 pixels which is larger than 2 X fitted extent = 8.868828 x 7.762943, not incorporating fit results [Sat Jun 8 09:56:14 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 09:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 09:56:14 2013] Assessing source extent using major [Sat Jun 8 09:56:14 2013] Source does appear to be extended [Sat Jun 8 09:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 09:56:43 2013] XMMSAS src. selection expression = ellipse(40608.207886, 33855.435577, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 09:56:43 2013] Not overwriting source region fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_src.reg [Sat Jun 8 09:56:43 2013] Extracting stamp from image fullrun_pn_xmm0082340101_pi300-10000_cl_sm2.00.img.gz, (430, 352) - (505, 427) [Sat Jun 8 09:56:43 2013] XMMSAS bgd. selection expression = annulus(40608.207886, 33855.435577, 1087.500000, 2175.000000, X, Y) && !ellipse(41063.054230, 32910.407104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41891.614532, 31310.311218, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 09:56:43 2013] Writing fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20.gif [Sat Jun 8 09:56:51 2013] ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0082340101/products/events/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create [Sat Jun 8 09:56:51 2013] Mean detx,y = (-17682.11, 2180.57) [Sat Jun 8 09:56:51 2013] ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_src.img and ../../xmm0082340101/products/images/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create [Sat Jun 8 09:56:51 2013] ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0082340101/products/spectra/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create [Sat Jun 8 09:56:51 2013] Setting source spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Sat Jun 8 09:56:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.pi.gz [Sat Jun 8 09:56:51 2013] ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0082340101/products/lightcurves/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create [Sat Jun 8 09:57:10 2013] Not generating rmf since there are only 76 counts [Sat Jun 8 09:57:10 2013] rmf not generated due to insufficient counts [Sat Jun 8 09:57:10 2013] fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20.arf exists, delete to re-create [Sat Jun 8 10:46:56 2013] Updating aperture counts using extracted products [Sat Jun 8 10:46:56 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 538.00 [Sat Jun 8 10:46:56 2013] Total counts from fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 1835.00 [Sat Jun 8 10:46:56 2013] Got source and background scale factors 1246815.000000, 5512380.000000 [Sat Jun 8 10:46:56 2013] User source parameters: Position = (467.3, 389.7) = 11 17 26.86 7 54 18.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 123.0 +/- 24.2 Background aperture counts = 415.0 Rate = 0.002 +/- 0.0004 [Sat Jun 8 10:46:56 2013] Updating counts from extracted products [Sat Jun 8 10:46:56 2013] Set source signif. to 122.95/20.37 = 6.04 [Sat Jun 8 10:47:09 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:47:09 2013] Using photon index=1.80, rate=0.00213, arf fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20.arf [Sat Jun 8 10:47:09 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:47:09 2013] Updating source flux to 2e-14 [Sat Jun 8 10:47:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 10:47:55 2013] xmm0082340101/analysis//spectral/fullrun_pn_xmm0082340101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete